MODELING OF SCG ROTOR DRIFT AND MEASURING SCHEME

Based on micro-displacement measurement principles of the spherical differential capacitance sensor, the relationship between the capacitance variation and the micro-displacement of each pair of detecting electrodes for the superconducting gyroscope （SCG） with eight detecting electrodes is analyzed. The model of the SCG rotor drift is established through dimensionless processing, linearization within micro-displacement and the least-square approach. Both the measurement scheme of the SCG rotor drift based on the model and its parameter relationship are presented. To guarantee the potential of the suspension rotor to be zero, the distributing scheme of four pairs of detecting electrodes is presented. The scheme can measure the magnitude and the direction of the rotor drift. The negative factors for affecting the measurement precision of .the SCG rotor drift and simulation results of the total effects are given. Simulation results show that the distributing capacitance of these differential capacitance sensors, the zero potential of the rotor and the model error are the major negative factors. The methods for eliminating those negative factors and the application range of the model are given. The model ensures the relationship between the output voltage and the rotor drift be linear.

Effects of two modification methods on the mechanical properties of wood flour/recycled plastic blends composites: addition of thermoplastic elastomer SEBS-g-MAH and in-situ grafting MAH

The effect of maleic anhydride grafted styrene-ethylene- buty-lene-styrene block copolymer （SEBS-g-MAH） and in-situ grafting MAH on mechanical, dynamic mechanical properties of wood flour/recycled plastic blends composites was investigated. Recycled plastic polypro-pylene （PP）, high-density polyethylene （HDPE） and polystyrene （PS）, were mixed with wood flour in a high speed blender and then extruded by a twin/single screw tandem extruder system to form wood flour/recycled plastic blends composites. Results show that the impact properties of the composites were improved more significantly by using SEBS-g-MAH compatibilizer than by using the mixtures of MAH and DCP via reactive blending in situ. However, contrary results were ob-served on the tensile and flexural properties of the corresponding com-posites. In General, the mechanical properties of composites made from recycled plastic blends were inferior to those made from virgin plastic blends, especially in elongation break. The morphological study verified that the interfacial adhesion or the compatibility of plastic blends with wood flour was improved by adding SEBS-g-MAH or in-situ grafting MAH. A better interfacial bonding between PP, HDPE, PS and wood flour was obtained by in-situ grafting MAH than the addition of SEBS-g-MAH. In-situ grafting MAH can be considered as a potential way of increasing the interfacial compatibility between plastic blends and wood flour. The storage modulus and damping factor of composites were also characterized through dynamic mechanical analysis （DMA）.

广告用语水分要少

请先看附图。这不是一幅中国画,而是一幅广告,刊登在今年四月间新加坡共和国唯一的华文日报——《南洋·星洲联合早报》上。 新加坡航空公司(简称“新航”)与中国民航总局签订协定,决定两国从今年5月15日起通航。新航提供目前世界上最先进的A310空中巴士(A310 Airbus)飞行中国航线,首航班机于6月15日上午11时由新加坡起飞,经上海到达北京。

探讨服装的称身问题

本文讨论服装称身与否及其标准

A wideband low-phase-noise LC VCO for DRM/DAB frequency synthesizer

The wideband CMOS voltage-controlled oscillator（VCO）with low phase noise and low power consumption is presented for a DRM/DAB（digital radio mondiale and digital audio broadcasting）frequency synthesizer.In order to obtain a wide band and a large tuning range,a parallel switched capacitor bank is added in the LC tank.The proposed VCO is implemented in SMIC 0.18-μm RF CMOS technology and the chip area is 750 μm×560 μm,including the test buffer circuit and the pads.Measured results show that the tuning range is 44.6%;i.e.,the frequency turning range is from 2.27 to 3.57 GHz.The measured phase noise is-122.22 dBc/Hz at a 1 MHz offset from the carrier.The maximum power consumption of the core part is 6.16 mW at a 1.8 V power supply.

Design of 2.5GHz Low Phase Noise CMOS LC-VCO

A 2 5GHz fully integrated LC VCO is fabricated in a standard single poly 4 metal 0 35μm digital CMOS process,using a complementary cross coupled topology for lowering power dissipation and reducing the effect of 1/ f noise.An on chip LC filtering technique is used to lower the high frequency noise.Accumulation varactors are used to widen frequency tuning.The measured tuning range is 23 percent.A single hexadecagon symmetric on chip spiral is used with grounded shield pattern to reduce the chip area and maximize the quality factor.A phase noise of -118dBc/Hz at 1MHz offset is measured.The power dissipation is 4mA at V DD =3 3V.

Laparoscopic liver resection for posterosuperior tumors using caudal approach and postural changes: A new technical approach

Laparoscopic liver resection(LLR) for tumors in the posterosuperior liver [segment(S) 7 and deep S6] is a challenging clinical procedure. This area is located in the bottom of the small subphrenic space(rib cage), with the large and heavy right liver on it when the patient is in the supine position. Thus, LLR of this area is technically demanding because of the handling of the right liver which is necessary to obtain a fine surgical view, secure hemostasis and conduct the resection so as to achieve an appropriate surgical margin in the cage. Handling of the right liver may be performed by the hand-assisted approach, robotic liver resection or by using spacers, such as a sterile glove pouch. In addition, the operative field of posterosuperior resection is in the deep bottom area of the subphrenic cage, with the liver S6 obstructing the laparoscopic caudal view of lesions. The use of intercostal ports facilitates the direct lateral approach into the cage and to the target area, with the combination of mobilization of the liver. Postural changes during the LLR procedure have also been reported to facilitate the LLR for this area, such as left lateral positioning for posterior sectionectomy and semi-prone positioning for tumors in the posterosuperior segments. In our hospital, LLR procedures for posterosuperior tumors are performed via the caudal approach with postural changes. The left lateral position is used for posterior sectionectomy and the semi-prone position is used for S7 segmentectomy and partial resections of S7 and deep S6 without combined intercostal ports insertion. Although the movement of instruments is restricted in the caudal approach, compared to the lateral approach, port placement in the para-vertebra area makes the manipulation feasible and stable, with minimum damage to the environment around the liver.

Influences of nonassociated flow rules on seismic bearing capacity factors of strip footing on soil slope by energy dissipation method

Seismic bearing capacity factors of a strip footing placed on soil slope were determined with both associated and nonassociated flow rules. Quasi-static representation of earthquake effects using a seismic coefficient concept was adopted for seismic bearing capacity calculations. A multi-wedge translational failure mechanism was used to obtain the seismic bearing capacity factors for different seismic coefficients and various inclined angles. Employing the associated flow rule, numerical results were compared with the published solutions. For bearing capacity factors related to cohesion and equivalent surcharge load, the maximum difference approximates 0.1%. However, the difference of bearing capacity factor related to unit weight is larger. With the two flow rules, the seismic bearing capacity factors were presented in the form of design charts for practical use. The results show that seismic bearing capacity factors related to the cohesion, the equivalent surcharge load and the unit weight increase greatly as the dilatancy angle increases, and that the nonassociated flow rule has important influences on the seismic bearing capacity.

In-situ reactive compatibilization of HDPE/GTR blends by dicumyl peroxide and phenolic resin without catalyst

In-situ reactive compatibilization of high-density polyethylene （HDPE）/ground tire rubber （GTR） blends by dicumyl peroxide （DCP） and HY-2045 - a kind of thermoplastic phenolic resin without catalyst was investigated by studying the mor-phology, stress and strain behavior, dynamic mechanical properties and crystallization performance of the blends. Scanning e-lectron microscopy （SEM） results show that there are a lot of fibrous materials distributing in the interface, which connects the dispersed phase with the matrix and obtains better interfacial strength for prominent mechanical properties. The addition of compatibilizers results in the decrease of crystallinity of the blends and the disappearance of an obvious yield phenomenon, which was proved by the differential scanning calorimeter （DSC） test and X-ray diffraction （XRD） characterization Although the crystallinity of the blends decreases,the tensile strength and tensile strain of the blends significantly increases, especially for the HDPE/GTR/DCP/HY-2045 blends, which is possibly attributed to the good compatibility of the blends owing to the in-situ interface crosslinking. In addition, it is found that the compatibilizing HDPE/GTR blends shows a higher tan^ peak temperature and a broaden transition peak for GTR phase.

Portable nano probe for micro/nano mechanical scratching and measuring

A nano probe system which can measure precise contact force in mN scale was demonstrated. The nano probe micro parts or optical parts in nanometer range resolution and scratch was originally designed for on-machine measuring applications and one kind of contact type measuring probes was designed for miniaturized or microfactory system. It ideally should be of small size and able to measure surface topography in nanometer scale. A commercial capacitive displacement sensor was proposed. It was a new concept in nano probe systems which can measure the displacement of shaft driven by the variation of surface topography. The nano probe mainly consisted of three parts： a capacitive displacement sensor, a porous type air slide and a contact probe part with various tip radiuses. The porous type air slide assured the shaft slided smoothly with controllable normal force in mN scale and had high positioning accuracy. The probe part which was directly in contact with target surface, can be applied to micro/nanoscale scratching as well as the measurement of sample topography by a simple tip change.

Design of a 4.224GHz Quadrature LC-VCO

A 4. 224GHz quadrature voltage-controlled oscillator （QVCO） applied in MB-OFDM UWB synthesizers is implemented in 0.18μm RF-CMOS technology. An improved structure of the QVCO is presented for better phase noise. A novel configuration of a MOS varactor is designed for good linearity of K as well as a new digital capacitor controlled array topology with lower parasitic capacitance and lower Ron. Measurement results show a phase noise of - 90.4dBc/Hz at 100kHz offset and - 116.7dBc/Hz at 1MHz offset from a carrier close to 4. 224GHz. The power dissipation is 10. 55mW from a 1.8V supply.

Determination of the Real Surface Area of Palladium Electrode

Four methods, including voltammetric measurement of double layer capacitance, surface oxides reduction, under potential deposition of Cu and carbon monoxide （CO） stripping have been applied to evaluate the real surface area of a polycrystalline Pd （pc-Pd） electrode. The results reveal that the second and third methods lead to consistent results with deviations below 5%. And from the determined double layer capacitance and CO stripping charge, it is deduced that the double layer capacity unit area is 23.1±0.4μF/cm2 and the saturated CO adlayer should be ca. 0.66 ML in order to ensure that the real surface area as determined is consistent with the other two techniques. The applicability as well as the attentions when applying these techniques for the determination of the real surface area of pc-Pd electrodes have been discussed.

A Three-Stage Operational Amplifier for a Wide Range of Capacitive Loads

This paper presents a three-stage CMOS operational amplifier （opamp） that combines accuracy with stability for a wide range of capacitive loads. A so-called quenching capacitor is added to a multipath nested Miller compensation （MNMC） topology to obtain stability for a wide range of capacitive loads. Theoretical analysis and mathematical formulas are provided to prove the improvement in stability. A prototype of this frequency compen- sation scheme is implemented in a 0.7μm CMOS process. Measurement′s show that the amplifier can drive capaci- tive loads ranging from 100pF to 100/μF with a gain of 90dB and a minimum phase margin of 26°. The amplifier has a unity-gain bandwidth of 1MHz for a 100pF capacitive load. It employs a quenching capacitance of 18pF.

Robust range-parameterized cubature Kalman filter for bearings-only tracking

In order to improve tracking accuracy when initial estimate is inaccurate or outliers exist,a bearings-only tracking approach called the robust range-parameterized cubature Kalman filter(RRPCKF)was proposed.Firstly,the robust extremal rule based on the pollution distribution was introduced to the cubature Kalman filter(CKF)framework.The improved Turkey weight function was subsequently constructed to identify the outliers whose weights were reduced by establishing equivalent innovation covariance matrix in the CKF.Furthermore,the improved range-parameterize(RP)strategy which divides the filter into some weighted robust CKFs each with a different initial estimate was utilized to solve the fuzzy initial estimation problem efficiently.Simulations show that the result of the RRPCKF is more accurate and more robust whether outliers exist or not,whereas that of the conventional algorithms becomes distorted seriously when outliers appear.

PALEOCLIMATIC CHANGES IN DABUSU LAKE

Study on the carbonate content and oxygen isotope of a sediment section in Dabusu Lake revealed that this region has experienced several cold wet and warm dry climatic cycles since 15400 a BP. It was about 6740 a BP when the climate in the region reached a relatively stable warm stage, so that the lake water was gradually condensed and finally a saline lake was formed.

Application of response surface method for optimal transfer conditions of multi-layer ceramic capacitor alignment system

The multi-layer ceramic capacitor (MLCC) alignment system aims at the inter-process automation between the first and the second plastic processes.As a result of testing performance verification of MLCC alignment system,the average alignment rates are 95% for 3216 chip,88.5% for 2012 chip and 90.8% for 3818 chip.The MLCC alignment system can be accepted for practical use because the average manual alignment is just 80%.In other words,the developed MLCC alignment system has been upgraded to a great extent,compared with manual alignment.Based on the successfully developed MLCC alignment system,the optimal transfer conditions have been explored by using RSM.The simulations using ADAMS has been performed according to the cube model of CCD.By using MiniTAB,the model of response surface has been established based on the simulation results.The optimal conditions resulted from the response optimization tool of MiniTAB has been verified by being assigned to the prototype of MLCC alignment system.

Impact of Capacity Parameters on Flexible Inventory Control Decision Model

From the mathematical point of view,the flexible inventory control model is proved in the practical problem application and the rationality of the capacity parameter selection and calculation.The purpose is to actively respond to demand fluctuations when there is a demand forecast error or a missing part of the demand information,and to avoid the risk of passive variable demand forecasting to set the immutable inventory capacity.At the same time,the game is controlled by the flexible and variable inventory control strategy and the customer’s willingness to demand.The paper mainly studies the influence of the setting of capacity parameters on the booking-limit decision and its benefits under the control of flexible space with variable total capacity.Through the two trends of capacity increase flexibility and capacity reduction flexibility in the flexible inventory control model,the mathematical performance and marginal utility methods are introduced to change the performance of the booking-limit control decision model under different scenarios.The correlation analysis between the capacity limit level and the return under the optimal Bookinglimit decision,and the above two flexibility parameters are obtained.

Preparation and capacitance properties of Ni foam@graphene@Co_(3)O_(4)composite electrode materials

Graphene under high temperature was prepared and loaded on Ni foam.Then,cobalt tetroxide precursor was grown on Ni foam in situ by the hydrothermal method.Finally,the sample was burned at high temperature to obtain Co_(3)O_(4)+graphene@Ni.The hydrothermal method used in this paper is easy to operate,with low-risk factors and environmental protection.The prepared Co_(3)O_(4)+graphene@Ni electrode exhibits superior electrochemical performance than Co_(3)O_(4)@Ni electrode.At a current density of 1 A/g,the specific capacitance of the Co_(3)O_(4)+graphene@Ni electrode calculated by a charge-discharge test is 935 F/g,which is much larger than that of Co_(3)O_(4)@Ni electrode of 340 F/g.

Network Reconfiguration for Load Balancing in Distribution System with Distributed Generation and Capacitor Placement

This paper presents an efficient algorithm for optimization of radial distribution systems by a network reconfiguration to balance feeder loads and eliminate overload conditions. The system load-balancing index is used to determine the loading conditions of the system and maximum system loading capacity. The index value has to be minimum in the optimal network reconfiguration of load balancing. The tabu search algorithm is employed to search for the optimal network reconfiguration. The basic idea behind the search is a move from a current solution to its neighborhood by effectively utilizing a memory to provide an efficient search for optimality. It presents low computational effort and is able to find good quality configurations. Simulation results for a radial 69-bus system. The study results show that the optimal on/off patterns of the switches can be identified to give the best network reconfiguration involving balancing of feeder loads while respecting all the constraints.

Pancharatnam Phase of a Mesoscopic Coupled Circuit

We derive a formula of the nonadiabatic noncyclic Pancharatnam phase for a mesoscopic circuit with coupled inductors and capacitors. It shows that, because of coupling effect, the circuit is in squeezed quantum state initially, and the time evolution of Pancharatnam phase exhibits an oscillation in a complex way. Especially we find that when the capacity of the coupled capacitors is larger than that of other ones in the circuit, with the variation of time Pancharatnam phase becomes nearly periodic square-wave, which perhaps can provide a new approach for the realization of quantum logic gate.