The high-frequency interference exists obviously in low strain integrity testing of large-diameter pipe pile when a transientpoint load is applied. An analytical solution of vertical vibratory response of large-diamet...The high-frequency interference exists obviously in low strain integrity testing of large-diameter pipe pile when a transientpoint load is applied. An analytical solution of vertical vibratory response of large-diameter pipe piles in low strain testing isdeduced in this paper. The analytical solution is verified by both numerical simulation and model test results. The time-domainvelocity responses on pile top are analyzed. The calculation results indicate that the time-domain responses at various pointssuffer different high-frequency interferences, thus the peak values and phases of different points are different. The influence ofvibratory modes on high-frequency interference is analyzed. It is found that the high-frequency interference at 90° point main-ly derives from the second flexural mode, but for other points it mainly originates from the first flexural mode. The factors af-fecting the frequency and peak value of interference waves have been investigated in this study. The results indicate that thelarger radius angle between the receiving and 90° points leads to greater peak value of high frequency wave crest. The leasthigh-frequency interference is detected at the angle of 90°. The frequency of interference waves is decreased with the increaseof pile radius, while the peak value is almost constant. The frequency is also related to pile modulus, i.e. the larger pile modu-lus results in greater frequency. The peak value varies with impulse width and soil resistance, i.e., the wider impulse width andlarger soil resistance cause smaller peak value. In conclusion, the frequency of interference waves is dependent on the geomet-rical and mechanics characteristics of the piles such as pile radius and modulus, but independent of the external conditionssuch as impulse width and soil resistance. On the other hand, the peak value of interference waves is mainly dependent on theexternal conditions but independent of the geometrical and mechanics characteristics of the piles. In practice, some externalmeasures should be adopted to weaken high-frequency interference such as using soft hammer, hammer cushion and adoptingsuitable receiving point.展开更多
We propose a fully distributed fusion system combining phase-sensitive optical time-domain reflectometry(Φ-OTDR) and OTDR for synchronous vibration and loss measurement by setting an ingenious frequency sweep rate(FS...We propose a fully distributed fusion system combining phase-sensitive optical time-domain reflectometry(Φ-OTDR) and OTDR for synchronous vibration and loss measurement by setting an ingenious frequency sweep rate(FSR) of the optical source. The relationships between FSR, probe pulse width and repeat period are given to balance the amplitude fluctuation of OTDR traces, the dead zone probability and the measurable frequency range of vibration events. In the experiment, we achieve synchronous vibration and loss measurement with FSR of 40 MHz/s, the proble pulse width of 100 ns and repeat rate of 0.4 ms. The fluctuation of OTDR trace is less than 0.45 dB when the signalto-noise ratio(SNR) is over 12 dB for a captured vibration event located at 9.1 km. The proposed method can be used for not only detection but also early warning of damage events in optical communication networks.展开更多
The optical metal nanoantenna on thin film solar cell is effective to enhance light absorption. In this paper, the diamond-type Ag nanoantenna arrays are proposed for increasing the efficiency of solar cells by locali...The optical metal nanoantenna on thin film solar cell is effective to enhance light absorption. In this paper, the diamond-type Ag nanoantenna arrays are proposed for increasing the efficiency of solar cells by localized surface plasmons resonance(LSPR). The effect of metal nanoantenna on the absorption enhancement is theoretically investigated by the finite difference time domain(FDTD) method. Broadband absorption enhancements in both visible and near-infrared regions are demonstrated in case of solar cell with diamond-type Ag nanoantennas. The spectral response is manipulated by geometrical parameters of the nanoantennas. The maximum enhancement factor of 1.51 for solar cell is obtained. For comparison, the other three nanoantennas are also analyzed. The results show that the solar cell with optimized diamond-type nanoantenna arrays is more efficient in optical absorption.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.51008115)the Provincial Science Foundation of Jiangsu(Grant No.BK2008040)
文摘The high-frequency interference exists obviously in low strain integrity testing of large-diameter pipe pile when a transientpoint load is applied. An analytical solution of vertical vibratory response of large-diameter pipe piles in low strain testing isdeduced in this paper. The analytical solution is verified by both numerical simulation and model test results. The time-domainvelocity responses on pile top are analyzed. The calculation results indicate that the time-domain responses at various pointssuffer different high-frequency interferences, thus the peak values and phases of different points are different. The influence ofvibratory modes on high-frequency interference is analyzed. It is found that the high-frequency interference at 90° point main-ly derives from the second flexural mode, but for other points it mainly originates from the first flexural mode. The factors af-fecting the frequency and peak value of interference waves have been investigated in this study. The results indicate that thelarger radius angle between the receiving and 90° points leads to greater peak value of high frequency wave crest. The leasthigh-frequency interference is detected at the angle of 90°. The frequency of interference waves is decreased with the increaseof pile radius, while the peak value is almost constant. The frequency is also related to pile modulus, i.e. the larger pile modu-lus results in greater frequency. The peak value varies with impulse width and soil resistance, i.e., the wider impulse width andlarger soil resistance cause smaller peak value. In conclusion, the frequency of interference waves is dependent on the geomet-rical and mechanics characteristics of the piles such as pile radius and modulus, but independent of the external conditionssuch as impulse width and soil resistance. On the other hand, the peak value of interference waves is mainly dependent on theexternal conditions but independent of the geometrical and mechanics characteristics of the piles. In practice, some externalmeasures should be adopted to weaken high-frequency interference such as using soft hammer, hammer cushion and adoptingsuitable receiving point.
基金supported by the National Natural Science Foundation of China(Nos.61405090,61307096 and 61540017)
文摘We propose a fully distributed fusion system combining phase-sensitive optical time-domain reflectometry(Φ-OTDR) and OTDR for synchronous vibration and loss measurement by setting an ingenious frequency sweep rate(FSR) of the optical source. The relationships between FSR, probe pulse width and repeat period are given to balance the amplitude fluctuation of OTDR traces, the dead zone probability and the measurable frequency range of vibration events. In the experiment, we achieve synchronous vibration and loss measurement with FSR of 40 MHz/s, the proble pulse width of 100 ns and repeat rate of 0.4 ms. The fluctuation of OTDR trace is less than 0.45 dB when the signalto-noise ratio(SNR) is over 12 dB for a captured vibration event located at 9.1 km. The proposed method can be used for not only detection but also early warning of damage events in optical communication networks.
基金supported by the International Scientific and Technological Cooperation Projects of Guizhou Province in China(No.[2011]7035)
文摘The optical metal nanoantenna on thin film solar cell is effective to enhance light absorption. In this paper, the diamond-type Ag nanoantenna arrays are proposed for increasing the efficiency of solar cells by localized surface plasmons resonance(LSPR). The effect of metal nanoantenna on the absorption enhancement is theoretically investigated by the finite difference time domain(FDTD) method. Broadband absorption enhancements in both visible and near-infrared regions are demonstrated in case of solar cell with diamond-type Ag nanoantennas. The spectral response is manipulated by geometrical parameters of the nanoantennas. The maximum enhancement factor of 1.51 for solar cell is obtained. For comparison, the other three nanoantennas are also analyzed. The results show that the solar cell with optimized diamond-type nanoantenna arrays is more efficient in optical absorption.
