An on-chip voltage reference with a wide supply voltage range is required by some applications,especially that of power management （PM） controller chips applied to telecommunication, automotive, lighting equipment, ...An on-chip voltage reference with a wide supply voltage range is required by some applications,especially that of power management （PM） controller chips applied to telecommunication, automotive, lighting equipment, etc., when high power supply voltage is needed. Accordingly,a new bandgap reference with a wide supply voltage range is proposed. Due to the improved structure,it features a high power supply rejection ratio （PSRR） and high temperature stability. In addition, an auxiliary micro-power reference is introduced to support the sleep mode of the PM chip and reduce its standby power consumption. The auxiliary reference provides bias currents in normal mode and a 1.28V reference voltage in sleep mode to replace the main reference and save power. Simulation results show that the reference provides a reference volt- age of 1.27V,which has a 3.5mV drift over the temperature range from -20 to 120~C and 56t^V deviation over a supply voltage range from 3 to 40V. The PSRR is higher than 100dB for frequency below 10kHz. The circuit was completed in 1.5tzm BCD （Bipolar-CMOS-DMOS） technology. The experimental results show that all main expectations are achieved.展开更多
Investigations are directed to the development of high-power sources ofUWB （ultrawideband） radiation based on excitation of anterma arrays with bipolar voltage pulses. In the previously designed high-power UWB sourc...Investigations are directed to the development of high-power sources ofUWB （ultrawideband） radiation based on excitation of anterma arrays with bipolar voltage pulses. In the previously designed high-power UWB sources only one bipolar pulse former and different feeder systems for pulse distribution through the array elements were used. By means of this approach, a number of UWB sources were created with the bipolar voltage pulse length ranging from 0.2 to 2 ns and effective potential of radiation ranging from 0.4 to 3 MV. The approach has got a restriction related to the electrical breakdown in a bipolar voltage pulse former. A new approach to the creation of high-power UWB sources based on a multicharmel bipolar pulse former is suggested： the number of bipolar pulse formers is equal to the number of antennas in the array. The main problem in realization of this approach is a stable operation of bipolar pulse formers in order to ensure a coherent summation of radiated pulses in the far-field zone. The result of this work is the instability of-150 ps at the pulse length of 3 ns obtained in a one-channel bipolar pulse former indicating that the suggested approach is realizable.展开更多
In this paper, we conduct research on the developmental trend of the computer music technology under the background of multichannelstereo recording. Surround sound is not only used in the fi lm, home theater, also pen...In this paper, we conduct research on the developmental trend of the computer music technology under the background of multichannelstereo recording. Surround sound is not only used in the fi lm, home theater, also penetrated the digital TV and digital broadcasting.But because of the limitation of storage media capacity and transmission bandwidth must use all kinds of that audio compression technologyto transmit audio data. As a more general and more practical signifi cance, as masking and by masking sound are not limited to their respectiveresend by a single speaker, but in different proportion to their respective ‘channel sound level is poor. To deal with this issue, this paperintegrates the signal denoising method as the optimization and achieves better performance.展开更多
Recently,hybrid energy harvester has been considered as an attractive potential approach to response the worldwide energy crisis due to the combination of advantages from different harvesting mechanism.In this paper,a...Recently,hybrid energy harvester has been considered as an attractive potential approach to response the worldwide energy crisis due to the combination of advantages from different harvesting mechanism.In this paper,a novel low-frequency wide-band hybrid energy harvester based on piezoelectric and triboelectric mechanism is presented and systematically studied including structural design,fabrication process,working principle simulation and measurement.With a vibrational excitation,the polyvinylidene fluoride(PVDF) cantilevers will vibrate and impact the polydimethylsiloxane(PDMS) film on the substrate,producing a piezoelectric output as well as a triboelectric output.The structural parameters of each cantilever are optimized using finite element simulation,and the well-designed PVDF cantilevers with controllable PDMS mass not only reduce the device working frequency but also enlarge the bandwidth.Under a sweep-frequency test,three voltage peaks induced by the piezoelectric part are observed at 15,32.5 and 47.5 Hz,with the value of 320,288 and 264 mV,respectively.With the combined triboelectric part,a 20 V peak-peak voltage is generated at 15 Hz.The electrical driving ability of this hybrid energy harvester also has been demonstrated by lighting up a commercial light emitting diode(LED).展开更多
文摘An on-chip voltage reference with a wide supply voltage range is required by some applications,especially that of power management （PM） controller chips applied to telecommunication, automotive, lighting equipment, etc., when high power supply voltage is needed. Accordingly,a new bandgap reference with a wide supply voltage range is proposed. Due to the improved structure,it features a high power supply rejection ratio （PSRR） and high temperature stability. In addition, an auxiliary micro-power reference is introduced to support the sleep mode of the PM chip and reduce its standby power consumption. The auxiliary reference provides bias currents in normal mode and a 1.28V reference voltage in sleep mode to replace the main reference and save power. Simulation results show that the reference provides a reference volt- age of 1.27V,which has a 3.5mV drift over the temperature range from -20 to 120~C and 56t^V deviation over a supply voltage range from 3 to 40V. The PSRR is higher than 100dB for frequency below 10kHz. The circuit was completed in 1.5tzm BCD （Bipolar-CMOS-DMOS） technology. The experimental results show that all main expectations are achieved.
文摘Investigations are directed to the development of high-power sources ofUWB （ultrawideband） radiation based on excitation of anterma arrays with bipolar voltage pulses. In the previously designed high-power UWB sources only one bipolar pulse former and different feeder systems for pulse distribution through the array elements were used. By means of this approach, a number of UWB sources were created with the bipolar voltage pulse length ranging from 0.2 to 2 ns and effective potential of radiation ranging from 0.4 to 3 MV. The approach has got a restriction related to the electrical breakdown in a bipolar voltage pulse former. A new approach to the creation of high-power UWB sources based on a multicharmel bipolar pulse former is suggested： the number of bipolar pulse formers is equal to the number of antennas in the array. The main problem in realization of this approach is a stable operation of bipolar pulse formers in order to ensure a coherent summation of radiated pulses in the far-field zone. The result of this work is the instability of-150 ps at the pulse length of 3 ns obtained in a one-channel bipolar pulse former indicating that the suggested approach is realizable.
文摘In this paper, we conduct research on the developmental trend of the computer music technology under the background of multichannelstereo recording. Surround sound is not only used in the fi lm, home theater, also penetrated the digital TV and digital broadcasting.But because of the limitation of storage media capacity and transmission bandwidth must use all kinds of that audio compression technologyto transmit audio data. As a more general and more practical signifi cance, as masking and by masking sound are not limited to their respectiveresend by a single speaker, but in different proportion to their respective ‘channel sound level is poor. To deal with this issue, this paperintegrates the signal denoising method as the optimization and achieves better performance.
基金supported by the National Natural Science Foundation of China (Grant Nos. 61176103,91023045)the National HiTech Research and Development Program of China ("863" Project) (Grant No.2013AA041102)+1 种基金the National Ph. D. Foundation Project (Grant No.20110001110103)the Global Research Outreach Program of Samsung Advanced Institute of Technology
文摘Recently,hybrid energy harvester has been considered as an attractive potential approach to response the worldwide energy crisis due to the combination of advantages from different harvesting mechanism.In this paper,a novel low-frequency wide-band hybrid energy harvester based on piezoelectric and triboelectric mechanism is presented and systematically studied including structural design,fabrication process,working principle simulation and measurement.With a vibrational excitation,the polyvinylidene fluoride(PVDF) cantilevers will vibrate and impact the polydimethylsiloxane(PDMS) film on the substrate,producing a piezoelectric output as well as a triboelectric output.The structural parameters of each cantilever are optimized using finite element simulation,and the well-designed PVDF cantilevers with controllable PDMS mass not only reduce the device working frequency but also enlarge the bandwidth.Under a sweep-frequency test,three voltage peaks induced by the piezoelectric part are observed at 15,32.5 and 47.5 Hz,with the value of 320,288 and 264 mV,respectively.With the combined triboelectric part,a 20 V peak-peak voltage is generated at 15 Hz.The electrical driving ability of this hybrid energy harvester also has been demonstrated by lighting up a commercial light emitting diode(LED).
