火电机组低负荷运行已成为常态,如何提高机组低负荷运行的热经济性是行业内的重要研究方向。提高给水温度是提高机组部分负荷时循环热效率的重要手段,对3种不同的提高部分负荷给水温度的调节方式进行计算分析,结果表明,通过对部分负荷...火电机组低负荷运行已成为常态,如何提高机组低负荷运行的热经济性是行业内的重要研究方向。提高给水温度是提高机组部分负荷时循环热效率的重要手段,对3种不同的提高部分负荷给水温度的调节方式进行计算分析,结果表明,通过对部分负荷给水温度的优化,可降低机组加权热耗约8.3~22.6 k J/k Wh,经济收益明显。展开更多
During seismic data acquisition, a high-sensitivity geophone with a high inherent frequency can increase high frequency energy by suppressing low frequency signals. This could cause a worse response at low frequencies...During seismic data acquisition, a high-sensitivity geophone with a high inherent frequency can increase high frequency energy by suppressing low frequency signals. This could cause a worse response at low frequencies. If the advantages of high-sensitivity data and conventional data are combined, the effective bandwidth will be broadened. Considering this, we propose a partial frequency band match filtering method which can combine the advantages of both high frequency and conventional frequency ranges. By introducing Ricker wavelets with different dominant frequencies and amplitudes, we established a theoretical model which possesses characteristics of both types of seismic data and demonstrates the feasibility of the partial frequency band match filtering method. A test using single shot records shows the effectiveness of this method for widening the effective frequency band.展开更多
To meet the increasing demand of wireless broadband applications in future 5G cellular networks, Device-to-Device(D2D) communications serve as a candidate paradigm to improve spectrum efficiency. Considering the chall...To meet the increasing demand of wireless broadband applications in future 5G cellular networks, Device-to-Device(D2D) communications serve as a candidate paradigm to improve spectrum efficiency. Considering the challenges after D2 D transmission is introduced for future cellular networks, this paper deals with mode selection and resource allocation issues related with D2 D communications. First, we propose a mode selection scheme which aims at guaranteeing the transmission of cellular users and also considering the potential interference. We analyze the condition under which D2 D underlay mode should be used. Second, we answer the question of "how to effectively reuse cellular resource once underlaying mode is adopted". We further present a resource allocation scheme that focuses on minimizing overall interference as well as a power control method to improve the performance of D2 D systems. Simulation results demonstrate that system parameters greatly affect the switching condition of mode selection and probability of choosing underlay mode. Furthermore, for D2 D underlaying scenario, the proposed resource allocation algorithm guarantees the transmission of cellular users with consideration of transmission requirements of D2 D users. Hence, the proposed scheme can achieve better user experience.展开更多
Investigations are directed to the development of high-power sources ofUWB （ultrawideband） radiation based on excitation of anterma arrays with bipolar voltage pulses. In the previously designed high-power UWB sourc...Investigations are directed to the development of high-power sources ofUWB （ultrawideband） radiation based on excitation of anterma arrays with bipolar voltage pulses. In the previously designed high-power UWB sources only one bipolar pulse former and different feeder systems for pulse distribution through the array elements were used. By means of this approach, a number of UWB sources were created with the bipolar voltage pulse length ranging from 0.2 to 2 ns and effective potential of radiation ranging from 0.4 to 3 MV. The approach has got a restriction related to the electrical breakdown in a bipolar voltage pulse former. A new approach to the creation of high-power UWB sources based on a multicharmel bipolar pulse former is suggested： the number of bipolar pulse formers is equal to the number of antennas in the array. The main problem in realization of this approach is a stable operation of bipolar pulse formers in order to ensure a coherent summation of radiated pulses in the far-field zone. The result of this work is the instability of-150 ps at the pulse length of 3 ns obtained in a one-channel bipolar pulse former indicating that the suggested approach is realizable.展开更多
文摘火电机组低负荷运行已成为常态,如何提高机组低负荷运行的热经济性是行业内的重要研究方向。提高给水温度是提高机组部分负荷时循环热效率的重要手段,对3种不同的提高部分负荷给水温度的调节方式进行计算分析,结果表明,通过对部分负荷给水温度的优化,可降低机组加权热耗约8.3~22.6 k J/k Wh,经济收益明显。
基金financially supported by the National Natural Science Foundation of China(No.41104072)College Students Science and Technology Innovation Activity Plan in Zhejiang Province(No. 2012R401214)
文摘During seismic data acquisition, a high-sensitivity geophone with a high inherent frequency can increase high frequency energy by suppressing low frequency signals. This could cause a worse response at low frequencies. If the advantages of high-sensitivity data and conventional data are combined, the effective bandwidth will be broadened. Considering this, we propose a partial frequency band match filtering method which can combine the advantages of both high frequency and conventional frequency ranges. By introducing Ricker wavelets with different dominant frequencies and amplitudes, we established a theoretical model which possesses characteristics of both types of seismic data and demonstrates the feasibility of the partial frequency band match filtering method. A test using single shot records shows the effectiveness of this method for widening the effective frequency band.
基金supported by the National Natural Science Foundation of China(No.61501371)National 863 High Tech R&D Program of China(project number:2014AA01A703)+1 种基金National Science and Technology Major Project of the Ministry of Science and Technology of China(project number:2014ZX03001025-006)The international Exchange and Cooperation Projects of Shaanxi Province(project number:2016KW-046)
文摘To meet the increasing demand of wireless broadband applications in future 5G cellular networks, Device-to-Device(D2D) communications serve as a candidate paradigm to improve spectrum efficiency. Considering the challenges after D2 D transmission is introduced for future cellular networks, this paper deals with mode selection and resource allocation issues related with D2 D communications. First, we propose a mode selection scheme which aims at guaranteeing the transmission of cellular users and also considering the potential interference. We analyze the condition under which D2 D underlay mode should be used. Second, we answer the question of "how to effectively reuse cellular resource once underlaying mode is adopted". We further present a resource allocation scheme that focuses on minimizing overall interference as well as a power control method to improve the performance of D2 D systems. Simulation results demonstrate that system parameters greatly affect the switching condition of mode selection and probability of choosing underlay mode. Furthermore, for D2 D underlaying scenario, the proposed resource allocation algorithm guarantees the transmission of cellular users with consideration of transmission requirements of D2 D users. Hence, the proposed scheme can achieve better user experience.
文摘Investigations are directed to the development of high-power sources ofUWB （ultrawideband） radiation based on excitation of anterma arrays with bipolar voltage pulses. In the previously designed high-power UWB sources only one bipolar pulse former and different feeder systems for pulse distribution through the array elements were used. By means of this approach, a number of UWB sources were created with the bipolar voltage pulse length ranging from 0.2 to 2 ns and effective potential of radiation ranging from 0.4 to 3 MV. The approach has got a restriction related to the electrical breakdown in a bipolar voltage pulse former. A new approach to the creation of high-power UWB sources based on a multicharmel bipolar pulse former is suggested： the number of bipolar pulse formers is equal to the number of antennas in the array. The main problem in realization of this approach is a stable operation of bipolar pulse formers in order to ensure a coherent summation of radiated pulses in the far-field zone. The result of this work is the instability of-150 ps at the pulse length of 3 ns obtained in a one-channel bipolar pulse former indicating that the suggested approach is realizable.
