In order to determine the relationship among energy consumption of rock and its fragmentation, dynamic strength and strain rate, granite, sandstone and limestone specimens were chosen and tested on large-diameter spli...In order to determine the relationship among energy consumption of rock and its fragmentation, dynamic strength and strain rate, granite, sandstone and limestone specimens were chosen and tested on large-diameter split Hopkinson pressure bar (SHPB) equipment with half-sine waveform loading at the strain rates ranging from 40 to 150 s- 1. With recorded signals, the energy consumption, strain rate and dynamic strength were analyzed. And the fragmentation behaviors of specimens were investigated. The experimental results show that the energy consumption density of rock increases linearly with the total incident energy. The energy consumption density is of an exponent relationship with the average size of rock fragments. The higher the energy consumption density, the more serious the fragmentation, and the better the gradation of fragments. The energy consumption density takes a good logarithm relationship with the dynamic strength of rock. The dynamic strength of rock increases with the increase of strain rate, indicating higher strain rate sensitivity.展开更多
In this paper, we present a Joint Source-Channel Decoding algorithm (JSCD) for Low-Density Parity Check (LDPC) codes by modifying the Sum-Product Algorithm (SPA) to account for the source redun-dancy, which results fr...In this paper, we present a Joint Source-Channel Decoding algorithm (JSCD) for Low-Density Parity Check (LDPC) codes by modifying the Sum-Product Algorithm (SPA) to account for the source redun-dancy, which results from the neighbouring Huffman coded bits. Simulations demonstrate that in the presence of source redundancy, the proposed algorithm gives better performance than the Separate Source and Channel Decoding algorithm (SSCD).展开更多
In this paper, we evaluate the general solutions for plane-symmetric thick domain walls in Lyra geometry in presence of bulk viscous fluid. Expressions for the energy density and pressure of domain walls are derived i...In this paper, we evaluate the general solutions for plane-symmetric thick domain walls in Lyra geometry in presence of bulk viscous fluid. Expressions for the energy density and pressure of domain walls are derived in both cases of uniform and time varying displacement field β. Some physical consequences of the models are also given. Finally, the geodesic equations and acceleration of the test particle are discussed.展开更多
Separation density is one of the most concerned operating parameters in gravity beneficiation.Although equal-errors cut point or distribution density is usually used as practical separation density in gravity benefici...Separation density is one of the most concerned operating parameters in gravity beneficiation.Although equal-errors cut point or distribution density is usually used as practical separation density in gravity beneficiation, the gravity separating process complexly affected by many kinds of factors is actually carried out at a fluctuant density; namely, the practical separation density is essentially a random variable.The studied results show that the equal-errors cut point is the mathematical expectation of this random variable, and the distribution density corresponds to the highest separation efficiency in the gravity separation process.This shows that the distribution density is the best working point of the gravity separation equipment under a particular operating condition.Therefore,in order to fully develop the function of the gravity separation equipment, the distribution density should be close to the theoretical separation density unlimitedly in the range of minimum fluctuation.展开更多
The wood basic density, cellulose content and fiber form were investigated for all sample trees at breast height (1.3 m) in seven poplar clones, and at 0 (butt), 5.6, 9.6, 13.6, 17.6, 19.6 and 21.6 m for clone Nanlin-...The wood basic density, cellulose content and fiber form were investigated for all sample trees at breast height (1.3 m) in seven poplar clones, and at 0 (butt), 5.6, 9.6, 13.6, 17.6, 19.6 and 21.6 m for clone Nanlin-95 and Nanlin-895, respectively, for providing information on variation patterns of wood density, fiber characteristics and holocellulose content within trees and among clones. The results showed that significant variations about wood density, cellulose content, fiber diameter and the ratio of fiber length to diameter existed among poplar clones examined. Variance analysis indicated that there were significant differences in wood basic density, fiber length, fiber diameter and cellulose content among the growth rings, which had an increasing tendency along the direction from pith to bark. The significant differences also existed in wood basic density, fiber length and fiber diameter at different tree height. The mean wood basic density had a general increase trend with increasing height of trees and the lowest was found at the base, while fiber length and fiber diameter had a general decline pattern with increasing height of trees and the biggest value was observed at the height of 5.6 m. Regression analysis indicated that the relationship between examined wood properties and growth ring number (cambial age), and the relationship between examined wood properties and tree height can be described by polynomial functions.展开更多
基金Projects(50674107, 10472134, 50490274) supported by the National Natural Science Foundation of China
文摘In order to determine the relationship among energy consumption of rock and its fragmentation, dynamic strength and strain rate, granite, sandstone and limestone specimens were chosen and tested on large-diameter split Hopkinson pressure bar (SHPB) equipment with half-sine waveform loading at the strain rates ranging from 40 to 150 s- 1. With recorded signals, the energy consumption, strain rate and dynamic strength were analyzed. And the fragmentation behaviors of specimens were investigated. The experimental results show that the energy consumption density of rock increases linearly with the total incident energy. The energy consumption density is of an exponent relationship with the average size of rock fragments. The higher the energy consumption density, the more serious the fragmentation, and the better the gradation of fragments. The energy consumption density takes a good logarithm relationship with the dynamic strength of rock. The dynamic strength of rock increases with the increase of strain rate, indicating higher strain rate sensitivity.
文摘In this paper, we present a Joint Source-Channel Decoding algorithm (JSCD) for Low-Density Parity Check (LDPC) codes by modifying the Sum-Product Algorithm (SPA) to account for the source redun-dancy, which results from the neighbouring Huffman coded bits. Simulations demonstrate that in the presence of source redundancy, the proposed algorithm gives better performance than the Separate Source and Channel Decoding algorithm (SSCD).
文摘In this paper, we evaluate the general solutions for plane-symmetric thick domain walls in Lyra geometry in presence of bulk viscous fluid. Expressions for the energy density and pressure of domain walls are derived in both cases of uniform and time varying displacement field β. Some physical consequences of the models are also given. Finally, the geodesic equations and acceleration of the test particle are discussed.
基金Supported by the Young Science Foundation of China(50025411)the Doctoral Science Research Foundation of University(20030290015)
文摘Separation density is one of the most concerned operating parameters in gravity beneficiation.Although equal-errors cut point or distribution density is usually used as practical separation density in gravity beneficiation, the gravity separating process complexly affected by many kinds of factors is actually carried out at a fluctuant density; namely, the practical separation density is essentially a random variable.The studied results show that the equal-errors cut point is the mathematical expectation of this random variable, and the distribution density corresponds to the highest separation efficiency in the gravity separation process.This shows that the distribution density is the best working point of the gravity separation equipment under a particular operating condition.Therefore,in order to fully develop the function of the gravity separation equipment, the distribution density should be close to the theoretical separation density unlimitedly in the range of minimum fluctuation.
基金This study was supported by National Natural Science Foundation of China, (No. 30070616).
文摘The wood basic density, cellulose content and fiber form were investigated for all sample trees at breast height (1.3 m) in seven poplar clones, and at 0 (butt), 5.6, 9.6, 13.6, 17.6, 19.6 and 21.6 m for clone Nanlin-95 and Nanlin-895, respectively, for providing information on variation patterns of wood density, fiber characteristics and holocellulose content within trees and among clones. The results showed that significant variations about wood density, cellulose content, fiber diameter and the ratio of fiber length to diameter existed among poplar clones examined. Variance analysis indicated that there were significant differences in wood basic density, fiber length, fiber diameter and cellulose content among the growth rings, which had an increasing tendency along the direction from pith to bark. The significant differences also existed in wood basic density, fiber length and fiber diameter at different tree height. The mean wood basic density had a general increase trend with increasing height of trees and the lowest was found at the base, while fiber length and fiber diameter had a general decline pattern with increasing height of trees and the biggest value was observed at the height of 5.6 m. Regression analysis indicated that the relationship between examined wood properties and growth ring number (cambial age), and the relationship between examined wood properties and tree height can be described by polynomial functions.
