It can be beneficial to reduce vibrations in shipboard piping, so the authors designed a new kind of piping damper with a plunger-type accumulator.Special requirements for the piping damper included low impact displac...It can be beneficial to reduce vibrations in shipboard piping, so the authors designed a new kind of piping damper with a plunger-type accumulator.Special requirements for the piping damper included low impact displacement, low speed, as well as an appropriate locking speed.Inside the damper, a plunger-type accumulator was installed and on the outside of the piston rod, a tube with exposed corrugations was added.Between the piston and the cylinder, a clearance seal was added.Using mathematical modeling, the effects of the dynamic performance of the damper's impact displacement on vibrations were observed.Changes to the clearance between the piston and the cylinder, the stiffness of the spring in the accumulator, the throttle valve size, and locking speed resistance of the damper were respectively simulated and studied.Based on the results of the simulation, dampers with optimal parameters were developed and tested with different accumulator spring stiffnesses and different throttles.The simulation and experimental results showed that parameters such as seal clearance between piston and cylinder, accumulator spring stiffness and throttle parameters have significant effects on the damper's impact displacement, low speed resistance and locking speed.展开更多
Breakdown formation in an explosive-emission electron source is related to the interelectrode gap filling with plasma propagating from the cathode and formed at the anode and in the interelectrode gap under the electr...Breakdown formation in an explosive-emission electron source is related to the interelectrode gap filling with plasma propagating from the cathode and formed at the anode and in the interelectrode gap under the electron beam action. Plasma anode is used to increase the beam current density. Preliminary interelectrode gap filling with plasma in the explosive-emission source decreases the influence of uncontrolled plasma arrival from the anode on the diode processes, promotes current density increase and duration of generated electron beams. The paper considers the influence of the cathode geometry on the breakdown formation in the plasma-anode explosive-emission electron source. The data on obtaining of microsecond electron beams with current density of 30 A/cm^2 and 1.5-2 kA/cm^2 are presented.展开更多
In this paper, the effect of surface roughness on sealing clearance, pressure distribution, friction torque and leakage is studied by the thermal-elasto-hydrodynamic mixed lubrication model. A convergent nominal clear...In this paper, the effect of surface roughness on sealing clearance, pressure distribution, friction torque and leakage is studied by the thermal-elasto-hydrodynamic mixed lubrication model. A convergent nominal clearance is formed by the pressure de- formation and thermal deformation of the seal faces. This causes more serious wear in the inner side than that of the outer side of the contact area. Mass leakage increases with the growing of the surface roughness. The temperature and thermal defor- mation on the seal surface increases substantially if the roughness is reduced. The contact mechanical seals have consistent performance when the standard deviation of surface roughness is approximately 0.2 pm. In order to validate the theoretical analysis model, a method combining the measurement of three-dimensioned profile and Raman spectrum is proposed.展开更多
To improve the pressure capability of magnetic fluid seal with more than a 0.25 mm single edge gap,a magnetic fluid sealing structure with multiple magnetic sources which has five permanent magnets was designed.Magnet...To improve the pressure capability of magnetic fluid seal with more than a 0.25 mm single edge gap,a magnetic fluid sealing structure with multiple magnetic sources which has five permanent magnets was designed.Magnetic field distributions under the pole pieces of the magnetic fluid seal with single and multiple magnetic sources were simulated by finite element method and its sealing pressure difference could be calculated according to the theoretical formula of the magnetic fluid seal.The effects of sealing gap height and magnetic source amount on the sealing capability were investigated experimentally.The theoretical and experimental results were compared,analyzed and discussed.The results demonstrated that the magnetic fluid seal with multiple magnetic sources was an effective method to improve the sealing capability for the rotary shaft with large gaps.The theoretical results agreed well with the experimental results when the height of the single edge gap was equal to 0.4 mm.However,it was found that when the height of the single edge gap was larger than 0.4 mm,the difference between the theoretical values and experimental values increased with the gap height because part of magnetic source had less or even no effect on magnetic fluid sealing capability.展开更多
He defect properties in Sc, Y, Gd, Tb, Dy, Ho, Er and Lu were studied using first-principles calculations based on density functional theory. The results indicate that the formation energy of an interstitial He atom i...He defect properties in Sc, Y, Gd, Tb, Dy, Ho, Er and Lu were studied using first-principles calculations based on density functional theory. The results indicate that the formation energy of an interstitial He atom is smaller than that of a substitutional He atom in all hcp rare-earth metals considered. Furthermore, the tetrahedral interstitial position is more favorable than an octahedral position for He defects. The results are compared with those from bcc and fcc metals.展开更多
基金Supported by the National Natural Science Foundation of China under Grant No.10972086
文摘It can be beneficial to reduce vibrations in shipboard piping, so the authors designed a new kind of piping damper with a plunger-type accumulator.Special requirements for the piping damper included low impact displacement, low speed, as well as an appropriate locking speed.Inside the damper, a plunger-type accumulator was installed and on the outside of the piston rod, a tube with exposed corrugations was added.Between the piston and the cylinder, a clearance seal was added.Using mathematical modeling, the effects of the dynamic performance of the damper's impact displacement on vibrations were observed.Changes to the clearance between the piston and the cylinder, the stiffness of the spring in the accumulator, the throttle valve size, and locking speed resistance of the damper were respectively simulated and studied.Based on the results of the simulation, dampers with optimal parameters were developed and tested with different accumulator spring stiffnesses and different throttles.The simulation and experimental results showed that parameters such as seal clearance between piston and cylinder, accumulator spring stiffness and throttle parameters have significant effects on the damper's impact displacement, low speed resistance and locking speed.
文摘Breakdown formation in an explosive-emission electron source is related to the interelectrode gap filling with plasma propagating from the cathode and formed at the anode and in the interelectrode gap under the electron beam action. Plasma anode is used to increase the beam current density. Preliminary interelectrode gap filling with plasma in the explosive-emission source decreases the influence of uncontrolled plasma arrival from the anode on the diode processes, promotes current density increase and duration of generated electron beams. The paper considers the influence of the cathode geometry on the breakdown formation in the plasma-anode explosive-emission electron source. The data on obtaining of microsecond electron beams with current density of 30 A/cm^2 and 1.5-2 kA/cm^2 are presented.
基金supported by the National Basic Research Program of China(Grant No.2009CB724304)the National Natural Science Foundation of China(Grant No.51275268)the National Science and Technology Support Plan(Grant No.2011BAF09B05)
文摘In this paper, the effect of surface roughness on sealing clearance, pressure distribution, friction torque and leakage is studied by the thermal-elasto-hydrodynamic mixed lubrication model. A convergent nominal clearance is formed by the pressure de- formation and thermal deformation of the seal faces. This causes more serious wear in the inner side than that of the outer side of the contact area. Mass leakage increases with the growing of the surface roughness. The temperature and thermal defor- mation on the seal surface increases substantially if the roughness is reduced. The contact mechanical seals have consistent performance when the standard deviation of surface roughness is approximately 0.2 pm. In order to validate the theoretical analysis model, a method combining the measurement of three-dimensioned profile and Raman spectrum is proposed.
基金supported by the National Natural Science Foundation of China(Grant No.50875017)
文摘To improve the pressure capability of magnetic fluid seal with more than a 0.25 mm single edge gap,a magnetic fluid sealing structure with multiple magnetic sources which has five permanent magnets was designed.Magnetic field distributions under the pole pieces of the magnetic fluid seal with single and multiple magnetic sources were simulated by finite element method and its sealing pressure difference could be calculated according to the theoretical formula of the magnetic fluid seal.The effects of sealing gap height and magnetic source amount on the sealing capability were investigated experimentally.The theoretical and experimental results were compared,analyzed and discussed.The results demonstrated that the magnetic fluid seal with multiple magnetic sources was an effective method to improve the sealing capability for the rotary shaft with large gaps.The theoretical results agreed well with the experimental results when the height of the single edge gap was equal to 0.4 mm.However,it was found that when the height of the single edge gap was larger than 0.4 mm,the difference between the theoretical values and experimental values increased with the gap height because part of magnetic source had less or even no effect on magnetic fluid sealing capability.
基金supported by the National Natural Science Foundation of China (Grant No. 10976007)the Fundamental Research Funds for the Central Universities (Grant No. ZYGX2009J040)+1 种基金the Science and Tech-nology Foundation of China Academy of Engineering Physics (Grant No. 2009A0301015)the US Department of Energy, Office of Fusion En-ergy Science (Grant No. DE-AC06-76RLO 1830)
文摘He defect properties in Sc, Y, Gd, Tb, Dy, Ho, Er and Lu were studied using first-principles calculations based on density functional theory. The results indicate that the formation energy of an interstitial He atom is smaller than that of a substitutional He atom in all hcp rare-earth metals considered. Furthermore, the tetrahedral interstitial position is more favorable than an octahedral position for He defects. The results are compared with those from bcc and fcc metals.
