循化线椒疫病发生情况调查研究

通过试验研究表明 ,不利于疫病发生发展的条件是 :与非茄科作物倒茬、合理密植、不积水、采用综防措施 ,其发病率分别仅为 1 5 %、4 2 6 %、8%和 2 0 3%。通过以上措施 ,可达到控制辣椒疫病危害的目的。

Physical Properties and Heat Transfer of Tectona grandis L.f. Wood

Tectona grandis L.f. （teak） is native to the Indian subcontinent and southeast Asia, and today is grown in almost every tropical region, for the physical and mechanical properties of its wood. Also, important qualitative aspects render it one of the most expensive wood species in the world. This work presents a study about the physical properties and heat transfer of T. grandis wood from plantations in C.ceres, Mato Grosso, Brazil. Six trees planted at three different intervals were used--two from each planting density--selected at random and with good phytosanitary characteristics, as well as having representative diameters and heights. The following properties were determined： basic and apparent densities, volume contraction, heat transfer and fiber saturation point. The basic and apparent mean general density of the samples was 0.48 g/cm3 and 0.55 g/cm3, respectively. The mean volume contraction of the teak wood was 8.57%. With decreased levels of wood humidity, loss of volume and planting effects were not significant at 5% probability. Mean heat transfer was 7.3 h/cm and the wood fiber saturation point was 17.25%, below the range found in literature, and there was no influence of the planting density on this property. According to the results, it was concluded that planting density significantly influenced the base density of the wood; the same effect does not occur for the other physical properties, and with respect to heat transfer, the wood was considered difficult to dry.

Ultra-fast Maize （Zea mays L.） Hybrid Growth Response to Plant Population Density

Current arable land and increasing food demand necessitates the practice of double and multiple cropping systems with inclusion of ultra-fast maize hybrids, which are characterized by smaller size, fewer leaves per plant, lower leaf area and fewer self-shading problems, under irrigation. In this context, a field experiment was conducted for two successive cropping seasons 2008/2009 to 2009/2010 at Kenilworth Experimental Station to evaluate the effect of row spacings and plant density on growth. Three row spacing （0.225, 0.45 and 0.90 m） and five plant densities （5, 7.5, 10, 12.5 and 15 plants m^-2） were used. Treatments were combined in a factorial combination and laid out in a completely randomized design with replications consisting of five single plants randomly selected from each treatment for destructive sampling. Growth factors reacted differently to row spacing by plant density. At crop establishment, growth indicators were not significantly affected by either main effects or a combination thereof. However, at the end of the vegetative phase, almost all growth indicators reached a maximum and were significantly affected by treatment interactions. Growth analysis showed that there was an interaction effect of row spacing by plant density on plant height, dry matter （DM） accumulation, leaf area index （LAI）, crop growth rate （CGR） and net assimilation rate （NAR） of maize. Therefore, the current investigation demonstrated that a row spacing of 0.45 m or 0.90 m with a plant density of 10 plants m^-2 was optimum for the selected ultra-fast maize hybrid under irrigation.

Investigating design principles of micropatterned encapsulation systems containing high-density microtissue arrays

Immunoisolation is an important strategy to protect transplanted cells from rejection by the host immune system.Recently,microfabrication techniques have been used to create hydrogel membranes to encapsulate microtissue in an arrayed organization.The method illustrates a new macroencapsulation paradigm that may allow transplantation of a large number of cells with microscale spatial control,while maintaining an encapsulation device that is easily maneuverable and remaining integrated following transplantation.This study aims to investigate the design principles that relate to the translational application of micropatterned encapsulation membranes,namely,the control over the transplantation density/quantity of arrayed microtissues and the fidelity of pre-formed microtissues to micropatterns.Agarose hydrogel membranes with microwell patterns were used as a model encapsulation system to exemplify these principles.Our results show that high-density micropatterns can be generated in hydrogel membranes,which can potentially maximize the percentage volume of cellular content and thereby the transplantation efficiency of the encapsulation device.Direct seeding of microtissues demonstrates that microwell structures can efficiently position and organize pre-formed microtissues,suggesting the capability of micropatterned devices for manipulation of cellular transplants at multicellular or tissue levels.Detailed theoretical analysis was performed to provide insights into the relationship between micropatterns and the transplantation capacity of membrane-based encapsulation.Our study lays the ground for developing new macroencapsulation systems with microscale cellular/tissue patterns for regenerative transplantation.