自然砾砂路基压密质量快速测量技术探究

在分析揭示自然砾砂路基的降沉量、压密度、静动回弹模量关联性基础上,提出了以控制表面降沉法为辅,以灌砂法为标定标准,以PFWD法为测量手段的自然砾砂路基压密质量快速测量方法,并相应给出了评价标准。

沥青复合料压密质量PQI测量的要素影响分析探究

分析通过无核密度仪(PQI)测量沥青复合料密度时的影响要素。影响要素包括:测量深度、沥青复合料温度、水、压碾遍数、级配、骨料种类。测量结果显示水与骨料种类对PQI测量值存在较大影响;压碾遍数和级配变化变化对PQI测量值有一定影响;沥青复合料测量深度及温度对PQI测量值无明显影响。基于测量结果,给出通过PQI快速测量沥青路面施工压密度的建议。

Cultivation Density of Toona ciliate

ln order to discuss the optimum seedling density of Toona ciliate, different seedling densities were studied. The results showed that seeding height and basal diameter decreased and quality of the seedlings declined with the increase of seedling density. The reasonable density of seedlings is key to cultivate high-quality seedlings and achieve the best seedling efficiency. The optimum density was 30 plants/m2 for the first class seedlings of biennial seedlings, and the optimum density of l and ll seedlings for production afforestation was 40 plants/m2.

Evaluation of Productivity and Light Quality in Two High Density Dwarf Rootstock Apple Orchards in Central China

[Ohjective] The aim of the study is to investigate the productivity and light quality in two high density M26 dwarf rootstock apple orchards in central China so as to provide some management guidance for close planting of dwarf rootstock apples.[Method] The technical parameters of individual trees and group parameters as shoot number and composition and canopy coverage were determined, and the light quality in the canopy, fruit production and quality were investigated. [Result] Slender spindle （SS） orchard has 54 thousands shoots per 667 m^2. Coverage rate is 76%. Leaf area index is 1.9. The ratio of long, medium and spur shoots is 1：1：8. Fruit yield is 3 263 kg/667 m^2 with 85% first grade fruit. Light interception in the canopy is 58% while the ratio of canopy with good light is 65%. Modified slender spindle （MSS） orchard has 93 thousands shoots per 667 m^2 and the coverage is 77%. Leaf area index is 3.3. The ratio cf long, medium and spur shoots is 1：2：7. Fruit yield is 3 931 kg/667 m^2 with 85% first grade fruit. The light interception in the canopy is 73% while the ratio of canopy with good light is 35%. [Conclusion] Apple orchard with M26 dwarf rootstock trained as SS and MSS tree form in medium planting density may be useful to the management of the similar orchards in Central China.

Carbon pool structure and carbon density of soil in Pinus koraiensis plantation ecosystem

The organic carbon contents,carbon density and carbon storage of the soil in the Pinus koraiensis plantation ecosystem were investigated in Maoershan experimental forest farm,Shangzhi County,Heilongjiang,on the west slope of the Zhangguangcai Mountains in northeastern China for providing data to evaluation of the carbon balance in forest ecosystem of northeastern China.These soil carbon indicators were measured in three forest types,pure P.koraiensis plantation,P.koraiensis and Betula platyphylla mixed forest,and the P.koraiensis and Quercus mongolica mixed forest.The soil carbon pool consisted of four compartments,namely L layer,F layer,H layer and B layer.With variance analysis,we found that both organic carbon content and carbon density of the soil were significantly affected by forest types,soil compartments and slope positions.The highest soil carbon density（278.63 Mg·ha^-1）.was observed in the mixed forest of P.koraiensis and Q.mongolica.The B layer had the highest carbon density（212.28 Mg·ha^-1） among all the soil compartments.In terms of slope position,the highest soil carbon density（394.18 Mg·ha^-1） presented in the low slope.Besides,soil carbon content and carbon density had a marked change with the organic matter content and vertical depth of the soil in each compartment.The results of this study implied that in the temperate humid region,the mixed ecosystem of regional Pinus koraiensis plantations and natural forest had relatively high carbon storage capability.

An Analytical Model of Drain Current for Ultra-Thin Body and Double-Gate Schottky Source/Drain MOSFETs Accounting for Quantum Effects

A compact drain current including the variation of barrier heights and carrier quantization in ultrathin-body and double-gate Schottky barrier MOSFETs （UTBDG SBFETs） is developed. In this model, Schrodinger＇s equation is solved using the triangular potential well approximation. The carrier density thus obtained is included in the space charge density to obtain quantum carrier confinement effects in the modeling of thin-body devices. Due to the quantum effects, the first subband is higher than the conduction band edge, which is equivalent to the band gap widening. Thus, the barrier heights at the source and drain increase and the carrier concentration decreases as the drain current decreases. The drawback of the existing models,which cannot present an accurate prediction of the drain current because they mainly consider the effects of Schottky barrier lowering （SBL） due to image forces,is eliminated. Our research results suggest that for small nonnegative Schottky barrier （SB） heights,even for zero barrier height, the tunneling current also plays a role in the total on-state currents. Verification of the present model was carried out by the device numerical simulator-Silvaco and showed good agreement.

Study on Loading Leaves Density with Cage Clamp on Quality of Cured Tobaccos in Bulk-Curing Barn

In order to determine the best loading density of tobacco leaf with cage clamp in bulk-curing barns, a curing test was conducted on middle-part tobacco leaves. The results showed that for good appearance quality of cured tobacco, the loading density at 59.52 kg/m2 （4 000 kg/barn） was the best, fol owed by 66.96 kg/m2 （4 500 kg/barn） and 74.40 kg/m2 （5 000 kg/barn）. As leaf loading density increased, the contents of leaf nicotine and total nitrogen increased, sugar content had smal changes, the ratio of sugar to nicotine decreased and tended to be balanced and the content of neutral aroma substances was decreasing, but the difference among treatments was not significant. With the increase of loading density, the sensory quality of cured leaf was better. When leaf loading density was 66.96 kg/m2 （4 500 kg/barn）, apperance quality of cured leaf improved considerably, with prominent aro-ma. Therefore, the best loading density of tobacco leaf in cage clamp of bulk-curing barn would be 66.96 kg/m2 （4 500 kg/barn） .

Effects of 3 months of full-court and half-court street basketball training on health profile in untrained men

Purpose: The aim of the present study was to investigate whether street basketball organized as 3 v 3 on either a half court(HC) with 1 basket or a full court(FC) with 2 baskets could improve fitness and health profiles of untrained men after 3 months of supervised training.Methods: Thirty-five untrained men(aged 20—42 years) completed the pre-and post-intervention testing(FC: n = 13, HC: n = 12, CO(control):n = 10). The training attendance was 2.0 ± 0.4 and 1.9 ± 0.3 times per week in FC and HC, respectively. Mean heart rate(HR) was 83.8 ± 6.0 percent of maximal heart rate(%HR_(max)) and 84.5 ± 2.9 %HR_(max) in FC and HC, respectively.Results: The 3 months of street basketball training on an FC with 2 baskets increased maximal oxygen uptake(2.4 mL/min/kg(95% confidence interval(CI): 1.0—3.9)), time to exhaustion(47 s(95%CI: 26—67)), lean body mass(0.8 kg(95%CI: 0.1—1.5)), and bone mineral density(0.021 g/cm^2(95%CI: 0.011—0.031)), whereas mean arterial pressure(—5.6 mm Hg(95%CI: —7.5 to 3.7)), body fat percentage(—1.6%,(95%CI: —2.5 to —0.7)), heart rate(—18 bpm(95%CI: —24 to —12)), and blood lactate(median: —1.4 mmol/L(interquartile range: —1.5 to —0.6)) during submaximal running were lowered. The changes were less pronounced after the training period when playing on an HC with 1 basket, but increases in maximal oxygen uptake(1.6 mL/min/kg(95%CI: —0.1 to 3.3)), time to exhaustion(28 s(95%CI: 9—47)), lean body mass(1.3 kg(95%CI: 0.3—2.4)), and lower body fat percentage(—0.9%(95%CI: —1.9 to —0.1)) were observed in this group.Conclusion: Three months of 3 v 3 street basketball training improved fitness and led to broad-spectrum improvements in variables related to overall health profile, with the most marked effects observed when playing on an FC with 2 baskets.

Experimental study on mechanism of influence of laser energy density on surface quality of Ti-6Al-4V alloy in selective laser melting

This experiment obtained different laser energy density(LED) by changing SLM molding process parameters.The surface morphology, surface quality, and microstructure of as-fabricated samples were studied. The effects of scanning speed, hatching space, and laser power on surface quality were analyzed, and the optimal LED range for surface quality was determined. The results show that pores and spherical particles appear on the sample’s surface when low LED is applied, while there are lamellar structures on the sides of the samples. Cracks appear on the sample’s surface,and the splash phenomenon increases when a high LED is taken. At the same time, a large amount of unmelted powder adhered to the side of the sample. The surface quality is the best when the LED is 150-170 J/mm^(3). The preferred hatch space is currently 0.05-0.09 mm, the laser power is 200-350 W, and the average surface roughness value is(15.1±3) μm.The average surface hardness reaches HV404±HV3, higher than the forging standard range of HV340-HV395.Increasing the LED within the experiment range can increase the surface hardness, yet an excessively high LED will not further increase the surface hardness. The microstructure is composed of needle-like α’-phases with a length of about 20μm, in a crisscross ‘N’ shape, when the LED is low. The β-phase grain boundary is not obvious, and the secondaryphase volume fraction is high;when the LED is high, the α’-phase of the microstructure is in the form of coarse slats, and the secondary-phase is composed of a small amount of secondary α’-phase, the tertiary α’-phase and the fourth α’-phase disappear, and the volume fraction of the secondary-phase becomes low.

Classification and Distribution of Common Aroma Components in Tobacco Leaf Based on Their Physical and Chemical Properties

[Objective] This study was aimed to find a new method for the classification of common aroma components in tobacco leaves. [Method] Sixty-four common aroma components in tobacco leaves were classified by cluster analysis based on their relative molecular weight. The contents and distribution of aroma components in another 71 C3F and 64 B2F tobacco leaf samples were analyzed by using the new method. [Result] The 64 common aroma components were divided into three categories trough the cluster analysis based on their molecular weight. CategoryⅠ consisted of 12 aroma components which had high molecular weight（281.308±21.536on average） and high boiling point（371.311±29.904 ℃ on average）. Category Ⅱ included 27 components which had low molecular weight（103.722 ± 13.115 on average） and low boiling point（176.132±42.342 ℃ on average）. Category Ⅲ included 25components which had middle molecular weight（175.393 ± 24.906 on average） and middle boiling point（250.562±45.431 ℃ on average）. The content of high-molecularweight aroma components in middle leaves（547.344±224.391 μg/g） was much higher than that in upper leaves（477.549±182.066 μg/g）. The content of low-molecularweight aroma component in middle leaves（17.468±3.459 μg/g） was also significantly higher than that in upper leaves（15.936±3.456 μg/g）. The content of middle-molecular-weight aroma component in middle leaves（44.931 ±8.953 μg/g） was extremely significantly higher than that in upper leaves（37.997±6.042 μg/g）. [Conclusion] This study proposed a new way to classify the aroma components in flue-cured tobacco leaves using the relative molecular weight as the index, which will provide theoretical reference for developing special tobacco leaves.

The research of the evaluation system for the sealability of hydraulic supports and jacks＇ seals

In order to enhance the sealing quality and assemble efficiency of hydraulic supports, the evaluation system for the sealability of the hydraulic support and jack＇s seals was established through the testing and experimenting technology in respects, such as seals＇ dimensions, reasonable amounts of compression, sealability, life, resistance to pressure, etc. Through life detecting test of the seal, found the longest life seal ring under the same conditions, and through the reciprocating test of the hydraulic support, found the most appropriate amount of interference between the groove and the seal ring, thus, to decrease the leakage and extend the life span of the hydraulic support.

Holography,UV/IR Relation,Causal Entropy Bound,and Dark Energy

The constraint on the total energy in a given spatial region is given from holography by the mass of a black hole that just fits in that region, which leads to an UV/IR relation： the maximal energy density in that region is proportional to Mp^2/L^2, where Mp is the Planck mass and L is the spatial scale of that region under consideration. Assuming the maximal black hole in the universe is formed through gravitational collapse of perturbations in the universe, then the ＂Jeans＂ scale of the perturbations gives a causal connection scale RCC. For gravitational perturbations, RCC^-2= Max （H＋ 2H^2, -H） for a fiat universe. We study the cosmological dynamics of the corresponding vacuum energy density by choosing the causal connection scale as the IR cutoff in the UV/IR relation, in the cases of the vacuum energy density as an independently conserved energy component and an effective dynamical cosmological constant, respectively. It turns out that only the case with the choice RCC^-2 = H＋ 2H^2, could be consistent with the current cosmological observations when the vacuum density appears as an independently conserved energy component. In this case, the model is called holographic Ricci scalar dark energy model in the literature.

The analytical solutions for orthotropic cantilever beams (II):Solutions for density functionally graded beams

In this paper, the specific solutions of orthotropic plane problems with body forces are derived. Then, based on the general solution in the case of distinct eigenvalues and the specific solution for density functionally graded orthotropic media, a series of beam problem, including the problems of cantilever beam with body forces depending only on z or on x coordinate and expressed by z or x polynomial is solved by the principle of superposition and the trial-and-error method.

牙哈凝析气田地面工程优化设计

该项研究是以牙哈凝析气田地面工程为重点研究对象。介绍了超高压密相模拟软件的超高压密相水力计算、超高压密相模拟计算设计、超高压密相模拟计算软件开发的硬件和运行环境、超高压密相模拟计算软件试算。介绍了超高压密相计量系统及超高压密相质量流量计设计。

Supersymmetry for Fermion Masses

It is proposed that supersymmetry （SUSY） may be used to understand fermion mass hierarchies. A family symmetry ZSL is introduced, which is the cyclic symmetry among the three generation SU（2） doublets. SUSY breaks at a high energy scale - 10^11 GeV. The electroweak energy scale- 100 GeV is unnaturally small No additional global symmetry, like the R-parlty, is imposed. The Yukawa couplings and R-parity violating couplings all take their natural values, which are О（10^0 -10^-2）. Under the family symmetry, only the third generation charged ferrnions get their masses. This family symmetry is broken in the soft SUSY breaking terms, which result in a hierarchical pattern of the fermion masses. It turns out that for the charged leptons, the r mass is from the Higgs vacuum expectation value （VEV） and the sneutrino VEVs, the muon mass is due to the sneutrino VEVs, and the electron gains its mass due to both ZZL and SUSY hreaking. The large neutrino mixing are produced with neutralinos playing the partial role of right-handed neutrinos. │Ve3│, which is for Ve-Vr mixing, is expected to be about 0.1. For the quarks, the third generation masses are from the Higgs VEVs, the second generation masses are from quantum corrections, and the down quark mass due to the sneutrino VEVs. It explains me/ms, ms/me, md 〉 mu and so on. Other aspects of the model are discussed.

How to repair the Hill cipher

The Hill cipher algorithm is one of the symmetric key algorithms that have several advantages in data encryption. However, a main drawback of this algorithm is that it encrypts identical plaintext blocks to identical ciphertext blocks and cannot encrypt images that contain large areas of a single color. Thus, it does not hide all features of the image which reveals patterns in the plaintext. Moreover, it can be easily broken with a known plaintext attack revealing weak security. This paper presents a variant of the Hill cipher that overcomes these disadvantages. The proposed technique adjusts the encryption key to form a dif- ferent key for each block encryption. Visually and computationally, experimental results demonstrate that the proposed variant yields higher security and significantly superior encryption quality compared to the original one.

A New Calculation of the In-Medium Quark Condensate at Finite Density and Temperature

The in-medium quark condensate is studied with an equivalent-mass approach in which one does not need to make assumptions on the derivatives of model parameters with respect to the quark current mass.It is shown that the condensate is generally a decreasing function of both the density and temperature with the decreasing speed depending on the confinement parameter.Specially,at given density,the condensate decreases on increasing temperature.The decreasing speed is comparatively small at lower temperature,and becomes very fast at higher temperature.

Engineering properties of sintered waste sludge as lightweight aggregate in a densified concrete mixture

The global trend towards carbon reduction,energy conservation,and sustainable use of resources has led to an increased focus on the use of waste sludge in construction.We used waste sludge from a reservoir to produce high-strength sintered lightweight aggregate,and then used the densified mixture design algorithm to create high-performance concrete from the sintered aggregate with only small amounts of mixing water and cement.Ultrasonic,electrical resistance and concrete strength efficiency tests were perfo...

A practical approach to the diagnosis of autoimmune pancreatitis

Autoimmune pancreatitis is a disease characterized by specific pathological features,different from those of other forms of pancreatitis,that responds dramatically to steroid therapy.The pancreatic parenchyma may be diffusely or focally involved with the possibility of a low-density mass being present at imaging,mimicking pancreatic cancer.Clinically,the most relevant problems lie in the diagnosis of autoimmune pancreatitis and in distinguishing autoimmune pancreatitis from pancreatic cancer.Since in the presence of a pancreatic mass the probability of tumour is much higher than that of pancreatitis,the physician should be aware that in focal autoimmune pancreatitis the first step before using steroids is to exclude pancreatic adenocarcinoma.In this review,we briefly analyse the strategies to be followed for a correct diagnosis of autoimmune pancreatitis.