Based on a simplified 3-DOF model of twin-tower structure linked by a sky-bridge,the frequency response functions,the displacement power spectral density(PSD)functions,and the time-averaged total vibration energy were...Based on a simplified 3-DOF model of twin-tower structure linked by a sky-bridge,the frequency response functions,the displacement power spectral density(PSD)functions,and the time-averaged total vibration energy were derived,by assuming the white noise as the earthquake excitation.The effects of connecting parameters,such as linking stiffness ratio and linking damping ratio,on the structural vibration responses were then studied,and the optimal connecting parameters were obtained to minimize the vibration energy of either the independent monomer tower or the integral structure.The influences of sky-bridge elevation position on the optimal connecting parameters were also discussed.Finally,the distribution characteristics of the top displacement PSD and the structural responses,excited by El Centro,Taft and artificial waves,were compared in both frequency and time domain.It is found that the connecting parameters at either end of connection interactively affect the responses of the towers.The optimal connecting parameters can greatly improve the damping connections on their seismic reduction effectiveness,but are unable to reduce the seismic responses of the towers to the best extent simultaneously.It is also indicated that the optimal connecting parameters derived from the simplified 3-DOF model are applicable for two multi-story structures linked by a sky-bridge with dampers.The seismic reduction effectiveness obtained varies from 0.3 to 1.0 with different sky-bridge mass ratio.The displacement responses of the example structures are reduced by approximately 22% with sky-bridge connections.展开更多
Effective thermal conductivity with convection and radiation is analyzed by the homogenization method. This method can precisely represent the microstructure of a packed bed. In this study, the effects of parameters s...Effective thermal conductivity with convection and radiation is analyzed by the homogenization method. This method can precisely represent the microstructure of a packed bed. In this study, the effects of parameters such as the radiation emissivity, temperature, contact area and particle size of the packed bed on the conductivity have been estimated. For example, heat transfer by radiation does not dominate if the material has voids of less than l mm in size. Moreover, the effects of contact area and pressure on effective thermal conductivity are negligible for thermal radiation. By considering the microscopic behavior of a packed bed, the homogenization method is thus a powerful tool for estimating the bed＇s effective thermal conductivity.展开更多
Discovery of effect of force adaptation in mechanics is presented. The discovery is based on use of the mobile closed mechanical contour for force transfer from the mechanism input link to an output link, According to...Discovery of effect of force adaptation in mechanics is presented. The discovery is based on use of the mobile closed mechanical contour for force transfer from the mechanism input link to an output link, According to discovery the motion transfer can be carried out by Assur structural group in the form of the mobile closed contour, and the output link is the link with one degree of freedom. The received mechanical system includes an input link, an output link and the closed contour placed between them as fourth class Assur structural group. The kinematic chain has two degrees of freedom. However the closed contour imposes an additional constraint on relative motion of its links. The carried out discovery allows providing the variable transfer ratio only due to the variable external load. Mechanical properties of the closed contour allow providing the required transfer ratio independently, smart and automatically.展开更多
In this paper,a third-generation dry gas-to-ethylbenzene process in a factory of PetroChina is considered.For the gradual catalyst deactivation in the alkylation reactor,a model is established with the parameters esti...In this paper,a third-generation dry gas-to-ethylbenzene process in a factory of PetroChina is considered.For the gradual catalyst deactivation in the alkylation reactor,a model is established with the parameters estimated from the reaction rate equation of alkylation based on the on-site data and those from laboratory analysis. The real-time dynamic simulation of the alkylation process is carried out,in which the module accuracy is ensured by using OPC(Object linking and embedding for Process Control)technique and adaptive correction of model parameters.Both the current and future operation temperature can be predicted.展开更多
基金Project(51178203)supported by the National Natural Science Foundation of China
文摘Based on a simplified 3-DOF model of twin-tower structure linked by a sky-bridge,the frequency response functions,the displacement power spectral density(PSD)functions,and the time-averaged total vibration energy were derived,by assuming the white noise as the earthquake excitation.The effects of connecting parameters,such as linking stiffness ratio and linking damping ratio,on the structural vibration responses were then studied,and the optimal connecting parameters were obtained to minimize the vibration energy of either the independent monomer tower or the integral structure.The influences of sky-bridge elevation position on the optimal connecting parameters were also discussed.Finally,the distribution characteristics of the top displacement PSD and the structural responses,excited by El Centro,Taft and artificial waves,were compared in both frequency and time domain.It is found that the connecting parameters at either end of connection interactively affect the responses of the towers.The optimal connecting parameters can greatly improve the damping connections on their seismic reduction effectiveness,but are unable to reduce the seismic responses of the towers to the best extent simultaneously.It is also indicated that the optimal connecting parameters derived from the simplified 3-DOF model are applicable for two multi-story structures linked by a sky-bridge with dampers.The seismic reduction effectiveness obtained varies from 0.3 to 1.0 with different sky-bridge mass ratio.The displacement responses of the example structures are reduced by approximately 22% with sky-bridge connections.
文摘Effective thermal conductivity with convection and radiation is analyzed by the homogenization method. This method can precisely represent the microstructure of a packed bed. In this study, the effects of parameters such as the radiation emissivity, temperature, contact area and particle size of the packed bed on the conductivity have been estimated. For example, heat transfer by radiation does not dominate if the material has voids of less than l mm in size. Moreover, the effects of contact area and pressure on effective thermal conductivity are negligible for thermal radiation. By considering the microscopic behavior of a packed bed, the homogenization method is thus a powerful tool for estimating the bed＇s effective thermal conductivity.
文摘Discovery of effect of force adaptation in mechanics is presented. The discovery is based on use of the mobile closed mechanical contour for force transfer from the mechanism input link to an output link, According to discovery the motion transfer can be carried out by Assur structural group in the form of the mobile closed contour, and the output link is the link with one degree of freedom. The received mechanical system includes an input link, an output link and the closed contour placed between them as fourth class Assur structural group. The kinematic chain has two degrees of freedom. However the closed contour imposes an additional constraint on relative motion of its links. The carried out discovery allows providing the variable transfer ratio only due to the variable external load. Mechanical properties of the closed contour allow providing the required transfer ratio independently, smart and automatically.
文摘In this paper,a third-generation dry gas-to-ethylbenzene process in a factory of PetroChina is considered.For the gradual catalyst deactivation in the alkylation reactor,a model is established with the parameters estimated from the reaction rate equation of alkylation based on the on-site data and those from laboratory analysis. The real-time dynamic simulation of the alkylation process is carried out,in which the module accuracy is ensured by using OPC(Object linking and embedding for Process Control)technique and adaptive correction of model parameters.Both the current and future operation temperature can be predicted.
