The effects of quenching in different ways following solid-solution treatment on properties and precipitation behaviors of7050 alloy were investigated by transmission electron microscopy （TEM）, scanning electron mic...The effects of quenching in different ways following solid-solution treatment on properties and precipitation behaviors of7050 alloy were investigated by transmission electron microscopy （TEM）, scanning electron microscopy （SEM）, selected areaelectron diffraction （SAED）, hardness and electrical conductivity tests. Results show that after quenching in different ways, electricalconductivity of the alloy decreases rapidly in the first 48 h of natural aging. The electrical conductivity of 7050 alloy in natural agingstate is determined by the size and density of GP zones, and the size of GP zones is the main factor. After natural aging for 70 d, thesize of GP zones is 1.8-2.6 nm in matrix of the immersion quenched sample and it is 1.4-1.8 nm in matrix of both water mist andforced air quenched samples. After natural and artificial peak aging, the hardness of the water mist quenched sample is HV 193.6 andits electrical conductivity is 30.5% （IACS） which are both higher than those of the immersion quenched sample. Therefore, watermist quenching is an ideal quenching method for 7050 alloy sheets after solid-solution treatment.展开更多
The adapted DC-DC converters should be smaller in size and have a small output current ripple to meet the increasing demand for low voltages with high performance and high density micro processors for several microele...The adapted DC-DC converters should be smaller in size and have a small output current ripple to meet the increasing demand for low voltages with high performance and high density micro processors for several microelectronic load applications. This paper proposes a DC-DC converter using variable on-time and variable switching frequency control enhanced constant ripple current control and reduced magnetic components. The proposed converter is realized by making the turn-offtime proportional to the on-time of the converter, according to the input and output voltage, thereby reducing the corresponding current ripple on output voltage in the continuous conduction mode. A Buck DC-DC converter using the proposed control strategy is analyzed in detail, along with some experimental results to show the performance and effectiveness of this converter.展开更多
This paper studies an M/M/1 queueing-inventory system with batch demands. Customers arrive in the system according to a compound Poisson process, where the size of the batch demands for each arrival is a random variab...This paper studies an M/M/1 queueing-inventory system with batch demands. Customers arrive in the system according to a compound Poisson process, where the size of the batch demands for each arrival is a random variable that follows a geometric distribution. The inventory is replenished according to the standard （s, S） policy. The replenishment time follows an exponential distribution. Two models are considered. In the first model, if the on-hand inventory is less than the size of the batch demands of an arrived customer, the customer takes away all the items in the inventory, and a part of the customer＇s batch demands is lost. In the second model, if the on-hand inventory is less than the size of the batch demands of an arrived customer, the customer leaves without taking any item from the inventory, and all of the customer＇s batch demands are lost. For these two models, the authors derive the stationary conditions of the system. Then, the authors derive the stationary distributions of the product-form of the joint queue length and the on-hand inventory process. Besides this, the authors obtain some important performance measures and the average cost functions by using these stationary distributions. The results are illustrated by numerical examples.展开更多
基金Project(2016YFB0300801)supported by the National Key Research and Development Program of ChinaProject(51371045)supported by the National Natural Science Foundation of China
文摘The effects of quenching in different ways following solid-solution treatment on properties and precipitation behaviors of7050 alloy were investigated by transmission electron microscopy （TEM）, scanning electron microscopy （SEM）, selected areaelectron diffraction （SAED）, hardness and electrical conductivity tests. Results show that after quenching in different ways, electricalconductivity of the alloy decreases rapidly in the first 48 h of natural aging. The electrical conductivity of 7050 alloy in natural agingstate is determined by the size and density of GP zones, and the size of GP zones is the main factor. After natural aging for 70 d, thesize of GP zones is 1.8-2.6 nm in matrix of the immersion quenched sample and it is 1.4-1.8 nm in matrix of both water mist andforced air quenched samples. After natural and artificial peak aging, the hardness of the water mist quenched sample is HV 193.6 andits electrical conductivity is 30.5% （IACS） which are both higher than those of the immersion quenched sample. Therefore, watermist quenching is an ideal quenching method for 7050 alloy sheets after solid-solution treatment.
文摘The adapted DC-DC converters should be smaller in size and have a small output current ripple to meet the increasing demand for low voltages with high performance and high density micro processors for several microelectronic load applications. This paper proposes a DC-DC converter using variable on-time and variable switching frequency control enhanced constant ripple current control and reduced magnetic components. The proposed converter is realized by making the turn-offtime proportional to the on-time of the converter, according to the input and output voltage, thereby reducing the corresponding current ripple on output voltage in the continuous conduction mode. A Buck DC-DC converter using the proposed control strategy is analyzed in detail, along with some experimental results to show the performance and effectiveness of this converter.
基金supported in part by the Natural Science Foundation of Hebei Province,China under Grant No.A2017203078Natural Science Research Project of the Education Department of Henan Province,China under Grant No.2011C110002
文摘This paper studies an M/M/1 queueing-inventory system with batch demands. Customers arrive in the system according to a compound Poisson process, where the size of the batch demands for each arrival is a random variable that follows a geometric distribution. The inventory is replenished according to the standard （s, S） policy. The replenishment time follows an exponential distribution. Two models are considered. In the first model, if the on-hand inventory is less than the size of the batch demands of an arrived customer, the customer takes away all the items in the inventory, and a part of the customer＇s batch demands is lost. In the second model, if the on-hand inventory is less than the size of the batch demands of an arrived customer, the customer leaves without taking any item from the inventory, and all of the customer＇s batch demands are lost. For these two models, the authors derive the stationary conditions of the system. Then, the authors derive the stationary distributions of the product-form of the joint queue length and the on-hand inventory process. Besides this, the authors obtain some important performance measures and the average cost functions by using these stationary distributions. The results are illustrated by numerical examples.
