期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
考虑裂缝变导流能力的致密气井现代产量递减分析 被引量:16
1
作者 孙贺东 欧阳伟平 +4 位作者 张冕 唐海发 陈长骁 马旭 付中新 《石油勘探与开发》 SCIE EI CAS CSCD 北大核心 2018年第3期455-463,共9页
针对水力压裂形成的裂缝导流能力会随空间以及时间发生变化这一特点,建立考虑裂缝空间、时间双重变导流和应力敏感效应的致密气压裂直井渗流的新型数学模型,采用混合有限元方法对模型进行求解,获得新模型的Blasingame现代产量递减分析... 针对水力压裂形成的裂缝导流能力会随空间以及时间发生变化这一特点,建立考虑裂缝空间、时间双重变导流和应力敏感效应的致密气压裂直井渗流的新型数学模型,采用混合有限元方法对模型进行求解,获得新模型的Blasingame现代产量递减分析典型曲线。以此为基础,讨论了裂缝空间、时间双重变导流及应力敏感效应对Blasingame曲线形态的影响。研究表明:空间变导流效应主要表现为降低早期典型曲线值;时间变导流效应会导致产量及产量积分曲线下掉,形成S型典型曲线;双重变导流则是两者效应的叠加;时间、空间变导流效应均不会延缓地层进入拟稳态阶段的时间。应力敏感会降低曲线值,但不会使曲线陡降;应力敏感会延缓地层进入拟稳态阶段的时间。忽略变导流效应和应力敏感效应,不会对井控动态储量的计算结果产生较大影响,但会给裂缝、储集层参数解释带来较大误差。经苏里格气田致密气压裂井的常规现代产量递减分析与模型对比,证实新方法可靠实用,且比常规方法精度更高,可用于存在裂缝变导流致密气压裂井的现代产量递减分析。 展开更多
关键词 致密气 压裂 现代产量递减分析 裂缝导流能力 空间变导流 时间导流 应力敏感
下载PDF
真空辅助树脂传递模塑成型工艺研究 被引量:1
2
作者 林涛 何明 陶生金 《江苏科技信息》 2020年第14期50-52,共3页
为研究分析风力发电机叶片真空辅助树脂传递模塑成型(VARTM)工艺的影响因素,文章通过采用不同导流网密度、玻纤布型号、玻纤布尺寸、玻纤布铺层厚度研究了其对VARTM工艺环氧树脂体系导流时间的影响,同时测量对应样品的含胶量,对比分析了... 为研究分析风力发电机叶片真空辅助树脂传递模塑成型(VARTM)工艺的影响因素,文章通过采用不同导流网密度、玻纤布型号、玻纤布尺寸、玻纤布铺层厚度研究了其对VARTM工艺环氧树脂体系导流时间的影响,同时测量对应样品的含胶量,对比分析了VARTM制品含胶量的影响因素。 展开更多
关键词 风力发电机叶片 真空辅助树脂传递模塑成型 导流时间 含胶量
下载PDF
A new approach to quantifying vehicle induced turbulence for complex traffic scenarios 被引量:3
3
作者 Yesul Kim Li Huang +1 位作者 Sunling Gong Charles Q.Jia 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2016年第1期71-78,共8页
Traffic-related pollutants adversely affect air quality, especially in regions near major roadways. The vehicleinduced turbulence(VIT) is a significant factor that controls the initial dilution, dispersion, and ultima... Traffic-related pollutants adversely affect air quality, especially in regions near major roadways. The vehicleinduced turbulence(VIT) is a significant factor that controls the initial dilution, dispersion, and ultimately the chemical and physical fate of pollutants by altering the conditions in the microenvironment. This study used a computational fluid dynamics(CFD) software FLUENT to model the vehicle-induced turbulence(VIT) generated on roadways, with a focus on impact of vehicle-vehicle interactions, traffic density and vehicle composition on turbulent kinetic energy(TKE). We show, for the first time, that the overall TKE from multiple vehicles traveling in series can be estimated by superimposing the TKE of each vehicle, without considering the distance between them while the distance is greater than one vehicle length. This finding is particularly significant since it enables a new approach to VIT simulations where the overall TKE is calculated as a function of number of vehicles. We found that the interactions between vehicles traveling next to each other in adjacent lanes are insignificant,regardless the directions of the traffic flow. Consequently, simulations of different traffic scenarios can be substantially simplified by treating two-way traffic as one-way traffic, with less than 5% difference in the overall volume-averaged TKE. We also developed equations that allow the estimation of the overall volume-averaged TKE as a function of the number and the type of vehicles. 展开更多
关键词 Computational fluid dynamics Turbulent kinetic energy Vehicle-induced turbulence Road-induced turbulence Mixed traffic
下载PDF
Constant Ripple Current Control for Switching DC-DC Converter
4
作者 Gwo-Tarng Chern Jenn-Jong Shieh 《Journal of Energy and Power Engineering》 2012年第9期1437-1441,共5页
The adapted DC-DC converters should be smaller in size and have a small output current ripple to meet the increasing demand for low voltages with high performance and high density micro processors for several microele... The adapted DC-DC converters should be smaller in size and have a small output current ripple to meet the increasing demand for low voltages with high performance and high density micro processors for several microelectronic load applications. This paper proposes a DC-DC converter using variable on-time and variable switching frequency control enhanced constant ripple current control and reduced magnetic components. The proposed converter is realized by making the turn-offtime proportional to the on-time of the converter, according to the input and output voltage, thereby reducing the corresponding current ripple on output voltage in the continuous conduction mode. A Buck DC-DC converter using the proposed control strategy is analyzed in detail, along with some experimental results to show the performance and effectiveness of this converter. 展开更多
关键词 Constant ripple current DC-DC converter variable switching frequency continuous conduction mode indirect currentsensor magnetic component.
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部