Color filters are produced using semiconductor production techniques although problems with low yield remain to be addressed. This study presents a new means of selective removal using excimer irradiation, chemical et...Color filters are produced using semiconductor production techniques although problems with low yield remain to be addressed. This study presents a new means of selective removal using excimer irradiation, chemical etching, or electrochemical machining on the fifth generation TFT LCDs. The selective removal of microstructure layers from the color filter surface of an optoelectronic flat panel display, as well as complete removal of the ITO thin-films, RGB layer, or resin black matrix (BM) layer from the substrate is possible. Individual defective film layers can be removed, or all films down to the Cr layer or bare glass can be completely eliminated. Experimental results demonstrate that defective ITO thin-films, RGB layers, or the resin BM layer can now be recycled with a great precision. When the ITO or RGB layer proves difficult to remove, excimer light can be used to help with removal. During this recycling process, the use of 225 nm excimer irradiation before chemical etching, or electrochemical machining, makes removal of stubborn film residues easy, effectively improving the quality of recycled color filters and reducing fabrication cost.展开更多
The heat-transfer behaviour of the conduction cold plate system used for avionics is investigated in this paper. The steady-state temperature profile for the cold plate is derived and the relationship between the cool...The heat-transfer behaviour of the conduction cold plate system used for avionics is investigated in this paper. The steady-state temperature profile for the cold plate is derived and the relationship between the coolant mass flowrate, the heat load and the hashest cold plate temperature is established.A model is proposed to describe the transient thermal rosponse of the cold plate under thermal shock condition. The analytic solution of the transient heat transfer within the cold plate is provided. The results of this paper agree with those of the finite element method and can be used for the structural design and performance evaluation of cold plate system.展开更多
基金supported by the BEN TEN CO., and National Science Council contracts 98-2221-E-152-001 and 99-2221-E-152-001
文摘Color filters are produced using semiconductor production techniques although problems with low yield remain to be addressed. This study presents a new means of selective removal using excimer irradiation, chemical etching, or electrochemical machining on the fifth generation TFT LCDs. The selective removal of microstructure layers from the color filter surface of an optoelectronic flat panel display, as well as complete removal of the ITO thin-films, RGB layer, or resin black matrix (BM) layer from the substrate is possible. Individual defective film layers can be removed, or all films down to the Cr layer or bare glass can be completely eliminated. Experimental results demonstrate that defective ITO thin-films, RGB layers, or the resin BM layer can now be recycled with a great precision. When the ITO or RGB layer proves difficult to remove, excimer light can be used to help with removal. During this recycling process, the use of 225 nm excimer irradiation before chemical etching, or electrochemical machining, makes removal of stubborn film residues easy, effectively improving the quality of recycled color filters and reducing fabrication cost.
文摘The heat-transfer behaviour of the conduction cold plate system used for avionics is investigated in this paper. The steady-state temperature profile for the cold plate is derived and the relationship between the coolant mass flowrate, the heat load and the hashest cold plate temperature is established.A model is proposed to describe the transient thermal rosponse of the cold plate under thermal shock condition. The analytic solution of the transient heat transfer within the cold plate is provided. The results of this paper agree with those of the finite element method and can be used for the structural design and performance evaluation of cold plate system.