Mode matching method is used to analyze the scattering characteristics of thecircular-to-circular groove waveguide junction. Matching the electric fields and magnetic fields atthe boundary of the junction, and multipl...Mode matching method is used to analyze the scattering characteristics of thecircular-to-circular groove waveguide junction. Matching the electric fields and magnetic fields atthe boundary of the junction, and multiplying the mode functions of the circular waveguide andcircular groove waveguide on both sides of the boundary equation, the scattering matrix equation isobtained, the scattering coefficients can be obtained from the equation. Then the scatteringcharacteristics of the iris with circular window in circular groove waveguide are analyzed. At lastthe convergent problem is discussed; when choosing a suitable mode group, convergent numericalresults are obtained, and the frequency response of the iris' scattering coefficients is also given.展开更多
The effectiveness of optimizing electrical conductivity of carbon fiber/carbon nanotube （CNT）/epoxy hybrid composites via Taguchi method was demonstrated. CNTs were induced on carbon fabric by electrophoretic deposi...The effectiveness of optimizing electrical conductivity of carbon fiber/carbon nanotube （CNT）/epoxy hybrid composites via Taguchi method was demonstrated. CNTs were induced on carbon fabric by electrophoretic deposition （EPD） technique. The essential deposition parameters were identified as l） the deposition time, 2） the deposition voltage, 3） the mass fraction of CNTs in suspension, and 4） the distance between the electrodes. An experimental design was then performed to establish the appropriate levels for each factor. An orthogonal array of L9 （34） was designed to conduct the experiments. Electrical conductivity results were collected as the response. The relative influences of design parameters on the response were discussed. Using the model, signal to noise （S/N） ratio and response characteristics for the optimized deposition parameter combination were predicted. The results show clearly that the optimum condition of electrophoretic deposition （EPD） process improves the electrical conductivity of carbon/epoxy hybrid composites.展开更多
YBCO superconducting films were prepared by Electron Beam Coevaporation method.All the YBCO films were annealed at 760°C in humidity range of 2.3-?9.5.Microstructure of the YBCO thin films was analyzed by means o...YBCO superconducting films were prepared by Electron Beam Coevaporation method.All the YBCO films were annealed at 760°C in humidity range of 2.3-?9.5.Microstructure of the YBCO thin films was analyzed by means of X-ray diffraction(XRD) and scanning electron microscopy(SEM).Superconducting properties of the YBCO films were measured by electromagnetic induction method.XRD results showed that c-axis-oriented grains existed in the YBCO films.Morphologies of the YBCO films showed that all the films had a smooth and crack-free surface.YBCO films prepared at 7.3% humidity condition showed Jc value of 4.6 MA cm-2 at 77 K in self-field.展开更多
文摘Mode matching method is used to analyze the scattering characteristics of thecircular-to-circular groove waveguide junction. Matching the electric fields and magnetic fields atthe boundary of the junction, and multiplying the mode functions of the circular waveguide andcircular groove waveguide on both sides of the boundary equation, the scattering matrix equation isobtained, the scattering coefficients can be obtained from the equation. Then the scatteringcharacteristics of the iris with circular window in circular groove waveguide are analyzed. At lastthe convergent problem is discussed; when choosing a suitable mode group, convergent numericalresults are obtained, and the frequency response of the iris' scattering coefficients is also given.
基金Project supported by the Second Stage of Brain Korea 21 Projects and the National Research Foundation of Korea (2011-0030804) Funded by the Korea Government (MEST)
文摘The effectiveness of optimizing electrical conductivity of carbon fiber/carbon nanotube （CNT）/epoxy hybrid composites via Taguchi method was demonstrated. CNTs were induced on carbon fabric by electrophoretic deposition （EPD） technique. The essential deposition parameters were identified as l） the deposition time, 2） the deposition voltage, 3） the mass fraction of CNTs in suspension, and 4） the distance between the electrodes. An experimental design was then performed to establish the appropriate levels for each factor. An orthogonal array of L9 （34） was designed to conduct the experiments. Electrical conductivity results were collected as the response. The relative influences of design parameters on the response were discussed. Using the model, signal to noise （S/N） ratio and response characteristics for the optimized deposition parameter combination were predicted. The results show clearly that the optimum condition of electrophoretic deposition （EPD） process improves the electrical conductivity of carbon/epoxy hybrid composites.
基金supported by the National Natural Science Foundation of China (Grant Nos.10921062 and 10502051)
文摘YBCO superconducting films were prepared by Electron Beam Coevaporation method.All the YBCO films were annealed at 760°C in humidity range of 2.3-?9.5.Microstructure of the YBCO thin films was analyzed by means of X-ray diffraction(XRD) and scanning electron microscopy(SEM).Superconducting properties of the YBCO films were measured by electromagnetic induction method.XRD results showed that c-axis-oriented grains existed in the YBCO films.Morphologies of the YBCO films showed that all the films had a smooth and crack-free surface.YBCO films prepared at 7.3% humidity condition showed Jc value of 4.6 MA cm-2 at 77 K in self-field.
