导连线整理带的制作及应用

SICU病房收治的病人病情大部分急、危、重，应用于病人的各种监护仪和治疗仪器较多，因此，难免会有很多导连线。如果未能有效地整理好这些错综复杂的导连线，不但增加了病人不适，同时也影响病房的美观，滑落到地面还容易造成不安全隐患，给护理工作带来诸多不便。为此，我们设计制作了导连线整理带，经临床应用，效果较好，介绍如下。

心电监护仪导联线固定新方法

目的:探讨心电监护仪导联线固定新方法在临床中的应用效果。方法:采用各导线"8"字型绕圈棉绳打活结套中间固定心电监护仪联线。结果:用"8"字型绕圈打活结固定监护仪导线后床单位整洁美观,减少了导线被牵拉、折断、污染;避免导线拖拉在地被脚踩减短导线寿命,同时也极大地方便了医护人员的操作。结论:用"8"字型绕圈打活结固定监护仪导线简易可行,节省开支,值得推广。

Effect of Zr and Sc on mechanical properties and electrical conductivities of Al wires

In order to obtain the Al wires with good mechanical properties and high electrical conductivities, conductive wires of Al-0.16 Zr, Al-0.16 Sc, Al-0.12Sc-0.04Zr（mass fraction, %） and pure Al（99.996%） were produced with the diameter of 9.5 mm by continuous rheo-extrusion technology, and the extruded materials were heat treated and analyzed. The results show that the separate additions of 0.16% Sc and 0.16% Zr to pure Al improve the ultimate tensile strength but reduce the electrical conductivity, and the similar trend is found in the Al-0.12Sc-0.04 Zr alloy. After the subsequent heat treatment, the wire with the optimum comprehensive properties is Al-0.12Sc-0.04 Zr alloy, of which the ultimate tensile strength and electrical conductivity reach 160 MPa and 64.03%（IACS）, respectively.

Study of WDM polymer planar curved waveguide couplers

A wavelength division multiplexer based on curved polymer planar waveguide is proposed. According to the coupled modetheory and the waveguide structure, the performance of the curved waveguide coupler (CWC) is analyzed. The results showthat CWC can accommodate wider multiplexing bandwidth than parallel straight waveguide coupler (SWC) due to thecompensation effect of the effective coupling length. The two variables, curvature radius and minimum spacing, increasethe design flexibility of the waveguide device. A 4-channel wavelength division multiplexing (WDM) system based onCWC is designed. The deviation of the center wavelength, due to the errors of curvature radius and minimum spacingduring fabrication process, is investigated. The smaller the curvature radius and the minimum spacing are, the larger thecentral wavelength deviation caused by the error of the curvature radius and the minimum spacing is, which provides someuseful theoretical basis for the design and the fabrication of polymer waveguide devices.

Rate decline analysis of multiple fractured horizontal well in shale reservoir with triple continuum

Multiple fractured horizontal well(MFHW) is widely applied in the development of shale gas. To investigate the gas flow characteristics in shale, based on a new dual mechanism triple continuum model, an analytical solution for MFHW surrounded by stimulated reservoir volume(SRV) was presented. Pressure and pressure derivative curves were used to identify the characteristics of flow regimes in shale. Blasingame type curves were established to evaluate the effects of sensitive parameters on rate decline curves, which indicates that the whole flow regimes could be divided into transient flow, feeding flow, and pseudo steady state flow. In feeding flow regime, the production of gas well is gradually fed by adsorbed gases in sub matrix, and free gases in matrix. The proportion of different gas sources to well production is determined by such parameters as storability ratios of triple continuum, transmissibility coefficients controlled by dual flow mechanism and fracture conductivity.

Continuously Dependent on Boundary Value for Solution of Semi-liner Heat-conduction Equation

Reference [1] deals with the uniqueness of solution to problem （A） and solution of problem （A） is continuously dependent on free term and initial value under certain conditions. This paper discuss the solution of problem （A） is continuously dependent on boundary value on the basis of references [2] and [3].

Infrared-controlled programmable metasurface

Programmable metasurface enables controlling electromagnetic (EM) waves in real time. By programming the states of active device embedded in metasurface element, the EM properties of the digital metasurface can be changed quickly without redesigning their structures. However, large numbers of long-distance wires are required to connect the programmable metasurface to provide the coded signals from field programmable gate array (FPGA) when controlling the metasurface at a long distance, which is complicated and inconvenient. Here, we propose an infrared-controlled programmable metasurface that can be programmed remotely. The infrared transceiver is able to switch the coding sequences stored in the FPGA controller, thus controlling the voltage on the varactors integrated in the metasurface. Experiment is performed at microwave frequencies, and the measured results verify that the scattering beams of the metasurface sample can be changed remotely by using infrared ray. The proposed infrared-controlled programmable metasurface opens up avenues for constructing a new class of remotely-tuning dynamic metasurfaces.