用于金属物体的标签天线一直是RFID标签天线研究的热点和难点,提出了一种新的低剖面用于金属物体的宽带超高频(ultra high frequency,UHF)射频识别(radio frequency identification,RFID)标签天线。采用增加2个耦合的寄生贴片来激发新...用于金属物体的标签天线一直是RFID标签天线研究的热点和难点,提出了一种新的低剖面用于金属物体的宽带超高频(ultra high frequency,UHF)射频识别(radio frequency identification,RFID)标签天线。采用增加2个耦合的寄生贴片来激发新的谐振波模,极大地改善了RFID标签天线的带宽,测量结果得到的标签天线半功率带宽为148 MHz,覆盖了所有的超高频RFID系统的频段。展开更多
A compact antenna formed by three concentric split rings for ultra-high frequency(UHF)radio frequency identification(RFID)tag is proposed in this paper.The antenna is composed of two parts,an outer short-circuited rin...A compact antenna formed by three concentric split rings for ultra-high frequency(UHF)radio frequency identification(RFID)tag is proposed in this paper.The antenna is composed of two parts,an outer short-circuited ring modified from a traditional split-ring resonator(SRR)antenna and an inner SRR load,so the antenna can be regarded as a short-circuited ring loaded with SRR.According to the transmission line theory,to conjugate match with the capacitive input-impedance of a tag chip,the length of the short-circuited ring isλg/4 shorter than that of an open-circuited dipole of a traditional SRR antenna,whereλg is the wavelengh of the operating frequency.Hence,the size of the proposed antenna is more compact than that of the traditional SRR antenna.Thereafter,the proposed antenna is simulated and optimized by ANSYS high-frequency structure simulator(HFSS).The impedance,efficiency,and mutual coupling of the fabricated antenna are tested in a reverberation chamber(RC).The results show that the size of the presented antenna is 83%smaller than that of the traditional SRR antenna and the proposed antenna can cover the whole UHF RFID operating frequency band worldwide(840—960 MHz).The measured read range of the tag exhibits maximum values of 45 cm in free space and 37 cm under dense tag environment.展开更多
文摘用于金属物体的标签天线一直是RFID标签天线研究的热点和难点,提出了一种新的低剖面用于金属物体的宽带超高频(ultra high frequency,UHF)射频识别(radio frequency identification,RFID)标签天线。采用增加2个耦合的寄生贴片来激发新的谐振波模,极大地改善了RFID标签天线的带宽,测量结果得到的标签天线半功率带宽为148 MHz,覆盖了所有的超高频RFID系统的频段。
文摘A compact antenna formed by three concentric split rings for ultra-high frequency(UHF)radio frequency identification(RFID)tag is proposed in this paper.The antenna is composed of two parts,an outer short-circuited ring modified from a traditional split-ring resonator(SRR)antenna and an inner SRR load,so the antenna can be regarded as a short-circuited ring loaded with SRR.According to the transmission line theory,to conjugate match with the capacitive input-impedance of a tag chip,the length of the short-circuited ring isλg/4 shorter than that of an open-circuited dipole of a traditional SRR antenna,whereλg is the wavelengh of the operating frequency.Hence,the size of the proposed antenna is more compact than that of the traditional SRR antenna.Thereafter,the proposed antenna is simulated and optimized by ANSYS high-frequency structure simulator(HFSS).The impedance,efficiency,and mutual coupling of the fabricated antenna are tested in a reverberation chamber(RC).The results show that the size of the presented antenna is 83%smaller than that of the traditional SRR antenna and the proposed antenna can cover the whole UHF RFID operating frequency band worldwide(840—960 MHz).The measured read range of the tag exhibits maximum values of 45 cm in free space and 37 cm under dense tag environment.
