A new switching circuit is presented for the application in the frequency range of 0 to 8 GHz. This switch is electro-thermally actuated and exhibits high radio frequency （RF） performance due to its lateral contact ...A new switching circuit is presented for the application in the frequency range of 0 to 8 GHz. This switch is electro-thermally actuated and exhibits high radio frequency （RF） performance due to its lateral contact mechanism, It composes of electroplated nickel and silicon nitride as structural materials. The isolation between bias and signal ports is realized by using silicon nitride. In the case of a small deformation, the relation between the displacement of the vertex and the pre-bending angle is analyzed. The metal contact is realized by in-plane motion and sidewall connection. The switches were fabricated using the MetalMUMPs process from MEMSCAP. The RF testing results show that the switch has a low insertion loss of 0. 9 dB at 8 GHz and a high isolation of 30 dB below 8 GHz.展开更多
The design and fabrication of a RF MEMS switch is reported for the first time in China.The switching element consists of a thin metallic membrane,which has the metal-isolator-metal contact and a capacitive shunt switc...The design and fabrication of a RF MEMS switch is reported for the first time in China.The switching element consists of a thin metallic membrane,which has the metal-isolator-metal contact and a capacitive shunt switch as single-pole single-throw.When an electrostatic potential is applied to the membrane and the bottom electrode,the attractive electrostatic force pulls the metal membrane down onto the bottom dielectric.The switch characteristics,such as insertion loss and isolation,depend on the off and on-capacitance.The test results are as follows:the pulldown voltage is about 20V;the insertion loss is less than 0 69dB from DC to 20GHz in the up-state;the isolation is more than 13dB from 14 to 18GHz and 16dB from 18 to 20GHz in the down-state.展开更多
文摘A new switching circuit is presented for the application in the frequency range of 0 to 8 GHz. This switch is electro-thermally actuated and exhibits high radio frequency （RF） performance due to its lateral contact mechanism, It composes of electroplated nickel and silicon nitride as structural materials. The isolation between bias and signal ports is realized by using silicon nitride. In the case of a small deformation, the relation between the displacement of the vertex and the pre-bending angle is analyzed. The metal contact is realized by in-plane motion and sidewall connection. The switches were fabricated using the MetalMUMPs process from MEMSCAP. The RF testing results show that the switch has a low insertion loss of 0. 9 dB at 8 GHz and a high isolation of 30 dB below 8 GHz.
文摘The design and fabrication of a RF MEMS switch is reported for the first time in China.The switching element consists of a thin metallic membrane,which has the metal-isolator-metal contact and a capacitive shunt switch as single-pole single-throw.When an electrostatic potential is applied to the membrane and the bottom electrode,the attractive electrostatic force pulls the metal membrane down onto the bottom dielectric.The switch characteristics,such as insertion loss and isolation,depend on the off and on-capacitance.The test results are as follows:the pulldown voltage is about 20V;the insertion loss is less than 0 69dB from DC to 20GHz in the up-state;the isolation is more than 13dB from 14 to 18GHz and 16dB from 18 to 20GHz in the down-state.
