Following a normal low temperature drying schedule, the small-diameter Birch lumbers （ 1 000mm× 45mm ×30mm） were dried with consecution-heats or intermittent-heating, visual drying defects （bow, crook, tw...Following a normal low temperature drying schedule, the small-diameter Birch lumbers （ 1 000mm× 45mm ×30mm） were dried with consecution-heats or intermittent-heating, visual drying defects （bow, crook, twist, check along grain and end check） were measured, and then statistical analyses were performed. It was found that the drying quality of small-diameter Birch lumbers could be improved with intermittent-heating, but the intermittent time should be prolonged. Prolonging intermittent time helped to weaken or even avoid wood distortion and drying checks. It wash＇ t helpful in avoiding crook. The drying quality of small-diameter Birch lumbers with all kinds of drying methods reached the second class of the Chinese National Standard. The drying quality reached the first class of the Chinese National Standard with the intermittent-heating in the area of visual wood defects.展开更多
Intermittent heating for drying of small diameter Larch lumbers is investigated experimentally. The lumbers were dried using an experimental drying schedule. Moisture content (MC) of the lumber was continuously record...Intermittent heating for drying of small diameter Larch lumbers is investigated experimentally. The lumbers were dried using an experimental drying schedule. Moisture content (MC) of the lumber was continuously recorded and final drying defects were examined. The drying curves showed that the drying rate was a constant in the early stage of intermittent heating drying and decreased evidently when the MC was about 18% (intermittent 2h) and 20% (intermittent 6h). The drying quality reached the second (intermittent 2h) and first grade (intermittent 6h) of the Chinese National Standard. The visual drying defects, especially the check extent along grains were reduced with intermittent heating. When the intermittent time increased, the effect was more obvious.展开更多
基金Sponsored by Huo Yingdong Funds (Grant No.81022)Program of Heilongjiang Province (Grant No.GB02B603).
文摘Following a normal low temperature drying schedule, the small-diameter Birch lumbers （ 1 000mm× 45mm ×30mm） were dried with consecution-heats or intermittent-heating, visual drying defects （bow, crook, twist, check along grain and end check） were measured, and then statistical analyses were performed. It was found that the drying quality of small-diameter Birch lumbers could be improved with intermittent-heating, but the intermittent time should be prolonged. Prolonging intermittent time helped to weaken or even avoid wood distortion and drying checks. It wash＇ t helpful in avoiding crook. The drying quality of small-diameter Birch lumbers with all kinds of drying methods reached the second class of the Chinese National Standard. The drying quality reached the first class of the Chinese National Standard with the intermittent-heating in the area of visual wood defects.
基金Sponsored by Huo Yingdong Fund(Grant No.81022) Sponsored by the Science and Technology Project Foundation of Harbin City( Grant No.2004AFX XJ021).
文摘Intermittent heating for drying of small diameter Larch lumbers is investigated experimentally. The lumbers were dried using an experimental drying schedule. Moisture content (MC) of the lumber was continuously recorded and final drying defects were examined. The drying curves showed that the drying rate was a constant in the early stage of intermittent heating drying and decreased evidently when the MC was about 18% (intermittent 2h) and 20% (intermittent 6h). The drying quality reached the second (intermittent 2h) and first grade (intermittent 6h) of the Chinese National Standard. The visual drying defects, especially the check extent along grains were reduced with intermittent heating. When the intermittent time increased, the effect was more obvious.
