This paper presents a novel capacitance probe, i.e., paraUel-wire capacitance probe （PWCP）, for two-phase flow measurement. Using finite element method （FEM）, the sensitivity field of the PWCP is investigated and ...This paper presents a novel capacitance probe, i.e., paraUel-wire capacitance probe （PWCP）, for two-phase flow measurement. Using finite element method （FEM）, the sensitivity field of the PWCP is investigated and the optimum sensor geometry is determiend in term of the characterisitc parameters. Then, the response of PWCP for the oil-water stratified flow is calculated, and it is found the PWCP has better linearity and sensitivity to the variation of water-layer thickness, and is almost independant of the angle between the oil-water interface and the sensor electrode. Finally, the static experiment for oil-water stratified flow is carried out and the calibration method of liquid holdup is presented.展开更多
The goal of this research was to determine the impact of nonionic surfactants on drag reduction effect in water and metal oxide nanofluid. Two nonionic surfactants （Rokacet 07 and Rokanol KT） and copper（II） oxide ...The goal of this research was to determine the impact of nonionic surfactants on drag reduction effect in water and metal oxide nanofluid. Two nonionic surfactants （Rokacet 07 and Rokanol KT） and copper（II） oxide wa- ter-based nanofluid were examined. Friction factors in a 4 mm diameter pipe for the Reynolds number between 8000 and 50000 were determined. Results showed that addition of nonionic surfactants caused the decrease of fric- tion factor in water and nanofluid. The drag reduction effect was similar in both cases. Presence of nanoparticles in the system has no great influence on drag reduction effect.展开更多
In this paper,a kind of composite microtube,which is made from superfine silk powder and polyurethane,reinforced by polyster and spandex tubular fabrics,was examined.The cross-section of composite microtubes were micr...In this paper,a kind of composite microtube,which is made from superfine silk powder and polyurethane,reinforced by polyster and spandex tubular fabrics,was examined.The cross-section of composite microtubes were microporous,and micropores were uniform distributed,the inner surface was relatively smooth.The results showed that the wall thickness of composite microtubes increased,which led to the strength,the breaking work and the initial modulus incresead;that the spandex content increased brought about the initial modulus and the breaking work decreased,but the breaking extension and the breaking load were firstly increased and then decreased;and all the mechanical properties decreased as the SFSP content increased.展开更多
To reach the target of smaller pressure drop and better heat transfer performance, packed beds with small tube-to-particle diameter ratio(D/dp<10) have now been considered in many areas. Fluid-to-wall heat transfer...To reach the target of smaller pressure drop and better heat transfer performance, packed beds with small tube-to-particle diameter ratio(D/dp<10) have now been considered in many areas. Fluid-to-wall heat transfer coefficient is an important factor determining the performance of this type of beds. In this work, local fluid-to-wall heat transfer characteristic in packed beds was studied by Computational Fluid Dynamics(CFD) at different Reynolds number for D/dp=1.5, 3.0 and 5.6. The results show that the fluid-to-wall heat transfer coefficient is oscillating along the bed with small tube-to-particle diameter ratio. Moreover, this phenomenon was explained by field synergy principle in detail. Two arrangement structures of particles in packed beds were recommended based on the synergy characteristic between flow and temperature fields. This study provides a new local understanding of fluid-to-wall heat transfer in packed beds with small tube-to-particle diameter ratio.展开更多
To explore the condensation characteristics of vapor flow inside vertical small-diameter tubes, the classical Nusselt theory is revised and an analytical model with variable tube wall temperature is established by con...To explore the condensation characteristics of vapor flow inside vertical small-diameter tubes, the classical Nusselt theory is revised and an analytical model with variable tube wall temperature is established by considering the effect of surface tension exerted by condensate film bending as well as the effect of shear stress on vapor-liquid interface. The effects of various factors including tube wall temperature and gravityon flow condensation in small-diameter tubes are analyzed theoretically to show the heat transfer characteristics. Comparison with the experimental data indicates that the proposed analytical model is fit to reveal the fundamental characteristics of flow condensation heat transfer in vertical small-diameter tube.展开更多
基金Supported by the National Natural Science Foundation of China （50974095, 41174109, 61104148）, and the National Science and Technology Mai or Projects （2011ZX05020-006）.
文摘This paper presents a novel capacitance probe, i.e., paraUel-wire capacitance probe （PWCP）, for two-phase flow measurement. Using finite element method （FEM）, the sensitivity field of the PWCP is investigated and the optimum sensor geometry is determiend in term of the characterisitc parameters. Then, the response of PWCP for the oil-water stratified flow is calculated, and it is found the PWCP has better linearity and sensitivity to the variation of water-layer thickness, and is almost independant of the angle between the oil-water interface and the sensor electrode. Finally, the static experiment for oil-water stratified flow is carried out and the calibration method of liquid holdup is presented.
基金Supported by the State Committee for Scientific Research(Poland)(NN209764040)Michal Drzazga received the Scholarship under the Project DoktoRIS-Scholarship Program for Innovative Silesia Co-financed by the European Union under the European Social Fund
文摘The goal of this research was to determine the impact of nonionic surfactants on drag reduction effect in water and metal oxide nanofluid. Two nonionic surfactants （Rokacet 07 and Rokanol KT） and copper（II） oxide wa- ter-based nanofluid were examined. Friction factors in a 4 mm diameter pipe for the Reynolds number between 8000 and 50000 were determined. Results showed that addition of nonionic surfactants caused the decrease of fric- tion factor in water and nanofluid. The drag reduction effect was similar in both cases. Presence of nanoparticles in the system has no great influence on drag reduction effect.
基金State Natural Sciences Fundgrant number:50873079+1 种基金National Major Foudamental Research Program of Chinagrant number:2009CB526402
文摘In this paper,a kind of composite microtube,which is made from superfine silk powder and polyurethane,reinforced by polyster and spandex tubular fabrics,was examined.The cross-section of composite microtubes were microporous,and micropores were uniform distributed,the inner surface was relatively smooth.The results showed that the wall thickness of composite microtubes increased,which led to the strength,the breaking work and the initial modulus incresead;that the spandex content increased brought about the initial modulus and the breaking work decreased,but the breaking extension and the breaking load were firstly increased and then decreased;and all the mechanical properties decreased as the SFSP content increased.
基金supported by the National Natural Science Foundation of China(5127618151476173)the National Basic Research Program of China(2011CB 710705)
文摘To reach the target of smaller pressure drop and better heat transfer performance, packed beds with small tube-to-particle diameter ratio(D/dp<10) have now been considered in many areas. Fluid-to-wall heat transfer coefficient is an important factor determining the performance of this type of beds. In this work, local fluid-to-wall heat transfer characteristic in packed beds was studied by Computational Fluid Dynamics(CFD) at different Reynolds number for D/dp=1.5, 3.0 and 5.6. The results show that the fluid-to-wall heat transfer coefficient is oscillating along the bed with small tube-to-particle diameter ratio. Moreover, this phenomenon was explained by field synergy principle in detail. Two arrangement structures of particles in packed beds were recommended based on the synergy characteristic between flow and temperature fields. This study provides a new local understanding of fluid-to-wall heat transfer in packed beds with small tube-to-particle diameter ratio.
基金This work was supported by the National Natural Science Foundation of China (Grant No. 59995550-3) .
文摘To explore the condensation characteristics of vapor flow inside vertical small-diameter tubes, the classical Nusselt theory is revised and an analytical model with variable tube wall temperature is established by considering the effect of surface tension exerted by condensate film bending as well as the effect of shear stress on vapor-liquid interface. The effects of various factors including tube wall temperature and gravityon flow condensation in small-diameter tubes are analyzed theoretically to show the heat transfer characteristics. Comparison with the experimental data indicates that the proposed analytical model is fit to reveal the fundamental characteristics of flow condensation heat transfer in vertical small-diameter tube.
