Combining wavelet transforms with conventional log differential curves is used to identify fractured sections is a new idea.In this paper,we first compute the mother wavelet transform of conventional logs and the wave...Combining wavelet transforms with conventional log differential curves is used to identify fractured sections is a new idea.In this paper,we first compute the mother wavelet transform of conventional logs and the wavelet decomposed signals are compared with fractures identified from image logs to determine the fracture-matched mother wavelet.Then the mother wavelet-based decomposed signal combined with the differential curves of conventional well logs create a fracture indicator curve,identifying the fractured zone.Finally the fracture density can be precisely evaluated by the linear relationship of the indicator curve and image log fracture density.This method has been successfully used to evaluate igneous reservoir fractures in the southern Songnan basin and the calculated density from the indicator curve and density from image logs are both basically consistent.展开更多
With the east section of the Changji sag Zhunger Basin as a case study, both a principal curvature method and a moving least square method are elaborated. The moving least square method is introduced, for the first ti...With the east section of the Changji sag Zhunger Basin as a case study, both a principal curvature method and a moving least square method are elaborated. The moving least square method is introduced, for the first time, to fit a stratum surface. The results show that, using the same-degree base function, compared with a traditional least square method, the moving least square method can produce lower fitting errors, the fitting surface can describe the morphological characteristics of stratum surfaces more accurately and the principal curvature values vary within a wide range and may be more suitable for the prediction of the distribution of structural fractures. The moving least square method could be useful in curved surface fitting and stratum curvature analysis.展开更多
Ground fi ssure is a geological hazard that poses a great threat to human life and,property and the environment.Therefore,it is necessary to detect shallow underground fi ssures eff ectively.In this paper,a time-frequ...Ground fi ssure is a geological hazard that poses a great threat to human life and,property and the environment.Therefore,it is necessary to detect shallow underground fi ssures eff ectively.In this paper,a time-frequency analysis of Rayleigh waves based on the wavelet transform is proposed to detect shallow underground fi ssures.The arrival time of the directed Rayleigh waves and the diff racted Rayleigh waves from the underground fi ssure is extracted from the time-frequency spectrum of any two traces.Furthermore,the locations of the underground fissures are calculated according to the time difference relation.Four sets of fracture models and one set of fi eld data were used to test the eff ectiveness of the wavelet transform of Rayleigh waves.Moreover,the detection results of the actual data are compared with that of the high-density electrical method to further prove its detection eff ect.The fi eld investigation shows that using the wavelet transform of Rayleigh waves to detect shallow underground fi ssures is feasible and eff ective.展开更多
This paper considers the problem of noise cancellation for the magnetic flux leakage (MFL) data obtained from the inspection of oil pipelines. MFL data is contaminated by various sources of noise, and the noise can co...This paper considers the problem of noise cancellation for the magnetic flux leakage (MFL) data obtained from the inspection of oil pipelines. MFL data is contaminated by various sources of noise, and the noise can considerably reduce the detectability of flaw signals in MFL data. This paper presents a new de-noising approach for removing the system noise contained in the MFL data by using the coefficients de-noising with wavelet transform. Experimental results are presented to demonstrate the advantages of this de-noising approach over the conventional wavelet de-noising method.展开更多
We utilized controlled vertical drying deposition (CVDD) method,which can fabricate a uniform face-center-cubic (FCC) structure film,to investigate the crack formation and the size dependence of shear modulus in a dry...We utilized controlled vertical drying deposition (CVDD) method,which can fabricate a uniform face-center-cubic (FCC) structure film,to investigate the crack formation and the size dependence of shear modulus in a drying particulate film.We found that both crack spacing and shear modulus depend on colloidal particle size.They drop with increase of particle radius (R) in a single range.Furthermore,compared with the shear modulus variation of a dry particulate film,it was found that both solid part and liquid part in a drying particulate film play equivalent roles in the film mechanical behavior.展开更多
In the Xiaowan arch dam there are massive temperature cracks nearly parallel to the dam axis. Obviously, whether the cracks may spread or not during the water storage process is one of the crucial factors for the safe...In the Xiaowan arch dam there are massive temperature cracks nearly parallel to the dam axis. Obviously, whether the cracks may spread or not during the water storage process is one of the crucial factors for the safety of a dam. In this paper, a new type of crack element, in which the contact component is implicitly included into the concrete component, is proposed to simulate the effects of the existing cracks. The crack element is proved by numerical example to share the merits of both conventional contact elements and joint elements. With a finite element model of the cracked arch dam together with its rock foundation established, the transient displacement and stress fields of the dam are obtained. The complicated rock foundation, the construction process of the arch dam, the massive cracks, the transient temperature field, as well as the water storage process have been taken into consideration in the simulation. In addition to the global model, several sub-models for typical crack tips are also generated with finer elements placed around the tips. Thus, more accurate displacement and stress distribution are obtained by simultaneous sub-model simulation. Based on the calculation of stress intensity factor for crack tips by extension method, the temperature cracks in the Xiaowan arch dam are finally proved to be stable.展开更多
基金sponsored by National Science and Technology Major Project of China (No. 2008 ZX 05009-001)
文摘Combining wavelet transforms with conventional log differential curves is used to identify fractured sections is a new idea.In this paper,we first compute the mother wavelet transform of conventional logs and the wavelet decomposed signals are compared with fractures identified from image logs to determine the fracture-matched mother wavelet.Then the mother wavelet-based decomposed signal combined with the differential curves of conventional well logs create a fracture indicator curve,identifying the fractured zone.Finally the fracture density can be precisely evaluated by the linear relationship of the indicator curve and image log fracture density.This method has been successfully used to evaluate igneous reservoir fractures in the southern Songnan basin and the calculated density from the indicator curve and density from image logs are both basically consistent.
基金Projects 2007CB209405 and 2002CB412702 supported by the National Basic Research Program of ChinaKZCX2-YW-113 by the Important Directive Item of the Knowledge Innovation Project of Chinese Academy of Sciences 40772100 by the National Natural Science Foundation of China
文摘With the east section of the Changji sag Zhunger Basin as a case study, both a principal curvature method and a moving least square method are elaborated. The moving least square method is introduced, for the first time, to fit a stratum surface. The results show that, using the same-degree base function, compared with a traditional least square method, the moving least square method can produce lower fitting errors, the fitting surface can describe the morphological characteristics of stratum surfaces more accurately and the principal curvature values vary within a wide range and may be more suitable for the prediction of the distribution of structural fractures. The moving least square method could be useful in curved surface fitting and stratum curvature analysis.
基金supported by the National Natural Science Foundation of China (Grant Nos. 41874123,41004043)fundamental research funds for the central universities (Grant Nos. 300102268401,300102268402)。
文摘Ground fi ssure is a geological hazard that poses a great threat to human life and,property and the environment.Therefore,it is necessary to detect shallow underground fi ssures eff ectively.In this paper,a time-frequency analysis of Rayleigh waves based on the wavelet transform is proposed to detect shallow underground fi ssures.The arrival time of the directed Rayleigh waves and the diff racted Rayleigh waves from the underground fi ssure is extracted from the time-frequency spectrum of any two traces.Furthermore,the locations of the underground fissures are calculated according to the time difference relation.Four sets of fracture models and one set of fi eld data were used to test the eff ectiveness of the wavelet transform of Rayleigh waves.Moreover,the detection results of the actual data are compared with that of the high-density electrical method to further prove its detection eff ect.The fi eld investigation shows that using the wavelet transform of Rayleigh waves to detect shallow underground fi ssures is feasible and eff ective.
文摘This paper considers the problem of noise cancellation for the magnetic flux leakage (MFL) data obtained from the inspection of oil pipelines. MFL data is contaminated by various sources of noise, and the noise can considerably reduce the detectability of flaw signals in MFL data. This paper presents a new de-noising approach for removing the system noise contained in the MFL data by using the coefficients de-noising with wavelet transform. Experimental results are presented to demonstrate the advantages of this de-noising approach over the conventional wavelet de-noising method.
基金supported by the National Basic Research Program of China (Grant No. 2011CB710901)the Knowledge Innovation Program of the Chinese Academy of Sciences (Grant No. KJCX2-YW-L08)
文摘We utilized controlled vertical drying deposition (CVDD) method,which can fabricate a uniform face-center-cubic (FCC) structure film,to investigate the crack formation and the size dependence of shear modulus in a drying particulate film.We found that both crack spacing and shear modulus depend on colloidal particle size.They drop with increase of particle radius (R) in a single range.Furthermore,compared with the shear modulus variation of a dry particulate film,it was found that both solid part and liquid part in a drying particulate film play equivalent roles in the film mechanical behavior.
基金supported by the National Natural Science Foundation of China (Grant No. 51079109)
文摘In the Xiaowan arch dam there are massive temperature cracks nearly parallel to the dam axis. Obviously, whether the cracks may spread or not during the water storage process is one of the crucial factors for the safety of a dam. In this paper, a new type of crack element, in which the contact component is implicitly included into the concrete component, is proposed to simulate the effects of the existing cracks. The crack element is proved by numerical example to share the merits of both conventional contact elements and joint elements. With a finite element model of the cracked arch dam together with its rock foundation established, the transient displacement and stress fields of the dam are obtained. The complicated rock foundation, the construction process of the arch dam, the massive cracks, the transient temperature field, as well as the water storage process have been taken into consideration in the simulation. In addition to the global model, several sub-models for typical crack tips are also generated with finer elements placed around the tips. Thus, more accurate displacement and stress distribution are obtained by simultaneous sub-model simulation. Based on the calculation of stress intensity factor for crack tips by extension method, the temperature cracks in the Xiaowan arch dam are finally proved to be stable.
