期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
激光焊接锋利型小锯片配方的研制 被引量:2
1
作者 何艳艳 唐霞辉 +1 位作者 朱国富 周毅 《金刚石与磨料磨具工程》 CAS 2002年第6期25-26,共2页
激光焊接小锯片刀头是通过热压烧结而成 ,其刀头比以往整体烧结的刀头致密 ,但锋利度不够。针对如何提高激光焊接小锯片的锋利性问题 ,本文主要研究了铁含量、添加元素成分以及金刚石品质、浓度、粒度等对锯片锋利度的影响。
关键词 激光焊接 金刚石小锯片 刀头配方 锋利度 研制
下载PDF
RC169-Ⅰ型小锯片连续烧结炉的研制 被引量:3
2
作者 王爱珍 肖俊明 +1 位作者 陈玉顺 刘红林 《金刚石与磨料磨具工程》 CAS 1996年第4期34-36,共3页
本文介绍了RC169-I型小锯片连续烧结炉的设计原理、设计方法、设备结构、性能及技术参数,并阐述该设备投入运行后的效果。
关键词 小锯片 烧结炉 技术参数 锯片
下载PDF
金刚石小锯片真空烧结技术 被引量:2
3
作者 吴卫民 《应用科技》 CAS 2001年第5期5-6,共2页
通过分析真空状态下金属的露点 ,得到真空烧结时比较理想的真空状态 ,并比较了真空烧结与保护气氛烧结后金刚石节块的综合性能。
关键词 金刚石小锯片 真空烧结 保护气氛烧结
下载PDF
新型小锯片烧结炉的研制
4
作者 王改民 郭广玲 《河南工业大学学报(社会科学版)》 1999年第2期30-32,共3页
用新材料制作的金刚石小锯片烧结炉具有传热快、温差小、寿命长、节能省电等特点,是小锯片烧结工艺研究和小批量生产的理想设备。
关键词 小锯片 烧结炉 新材料
下载PDF
热压烧结工艺在烧结小锯片生产中的应用 被引量:1
5
作者 张延昭 《金刚石与磨料磨具工程》 CAS 北大核心 2005年第3期73-74,77,共3页
为了提高小锯片的生产效率、产品合格率和产品质量,本文把热压工艺应用于烧结小锯片的生产,通过对烧结过程中的温度与压力的控制,即升温时间3min,保温时间5min;初压设定在5MPa,终点压力设定在12MPa。在该工艺下生产的小锯片的使用寿命... 为了提高小锯片的生产效率、产品合格率和产品质量,本文把热压工艺应用于烧结小锯片的生产,通过对烧结过程中的温度与压力的控制,即升温时间3min,保温时间5min;初压设定在5MPa,终点压力设定在12MPa。在该工艺下生产的小锯片的使用寿命比井式炉烧结的小锯片延长50%,硬度偏差在±10度(HRB)以内,产品合格率达到98%以上。该工艺下生产的小锯片经国家磨料磨具质量监督检验中心检测,符合技术指标要求。解决了金刚石小锯片生产效率低、硬度不均匀、质量不稳定等问题。取得了较好的效果,提高了产品质量并使质量稳定,同时降低了生产成本,获得了可观的经济效益。 展开更多
关键词 热压烧结 小锯片
下载PDF
竹筒捕鼠器的制作
6
作者 卢瑞家 《企业科技与发展》 1997年第7期21-21,共1页
制作材料 用一节内径约3厘米,筒深约28厘米的一头带节的竹筒作外筒;一节内径约2.5厘米,长度24厘米,一头带节的竹筒作内筒。弹性较好的橡皮筋一条(最好用汽车内胎,剪1厘米宽的一圈,千万不要剪断,可以不用铁丝扎,套上就行),细铁丝少许。
关键词 捕鼠器 竹筒 橡皮筋 制作材料 发线 制作方法 使用方法 小锯片 竹节 铁丝
下载PDF
Intersexual differences in leaf size and shape in dioecious Adriana tomentosa 被引量:1
7
作者 Mariola Rabska Nigel W.M.Warwick +1 位作者 Grzegorz Iszkulo Caroline L.Gross 《Journal of Plant Ecology》 SCIE CSCD 2021年第1期67-83,共17页
Aims Leaf size and shape as objects of natural selection can play adaptive roles,and can change with the age of leaves.They can differ between sexes in dioecious species,and in most cases,females have larger leaves.Pr... Aims Leaf size and shape as objects of natural selection can play adaptive roles,and can change with the age of leaves.They can differ between sexes in dioecious species,and in most cases,females have larger leaves.Previous studies showed that sexes of Adriana tomentosa differed in their leaf lobing.In this study,we investigated whether there were other differences between sexes in leaf size,shape and ecophysiology,and if those differences were connected with adaptations and reproductive roles in the sexes of A.tomentosa.Methods Physical and chemical features of young and old leaves originating from female and male A.tomentosa plants growing in two disjunct populations in eastern Australia were measured.We determined leaf area,perimeter length,serration,circularity,aspect ratio(AR),roundness and the ecophysiological factors:specific leaf area,dry matter content,leaf moisture,relative water content,δ^(13)C,δ^(15)N isotope compositions,carbon and nitrogen contents and C:N ratio.Leaf lobing,the degree of lamina damage and the content of photosynthetic pigments were also determined.Important Findings In both populations studied,the sex of plants significantly influenced almost all parameters connected with leaf morphology such as area,perimeter length,circularity,AR and roundness.Contrary to expectations,males from both populations had a greater leaf area that was independent of leaf age.Male leaves were more lobed with a longer perimeter,but they were less elongated and less serrated.Only small differences between female and male leaves were observed for the ecophysiological factors.The degree of leaf damage differed between sexes but also with population.Differences between sexes in leaf area and shape were not compensated by measured ecophysiological factors.However,leaf area may be compensated by other ecophysiological mechanisms related to leaf morphology,because females had greater leaf serration in comparison to males despite the smaller leaf area. 展开更多
关键词 Adriana tomentosa dioecious species leaf shape leaf size SERRATION C:N ratio
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部