Several physical and chemical detection methods were used to study the basic properties of sintering dust （ESP dust） collected from Baogang Steel Corporation. The result shows that the major constituents of the ESP ...Several physical and chemical detection methods were used to study the basic properties of sintering dust （ESP dust） collected from Baogang Steel Corporation. The result shows that the major constituents of the ESP dust are KCl, NaCl, Fe2O_3 and Fe3O_4. Water leaching experiment on the sintering dust shows that KCl in the ESP dust can be separated and recovered by water leaching and fractional crystallization. Component analysis of leaching solution indicates that the massive calcium sulfate in the leaching solution should be removed first in order to obtain the pure potassium salt. In order to provide theoretical guidance to inhibit the dissolution of calcium ions from the sintering dust, the water leaching experiment of ESP dust and the dissolution behavior of CaSO_4 in the potassium chloride, sodium chloride, potassium sulfate and their mixed salt solution were studied. It is found that, a lower liquid-solid ratio should be chosen in the leaching process to inhibit the dissolution of calcium sulfate dehydrate. Using sodium carbonate solution as a precipitating agent, the influences of the concentration of sodium carbonate solution, reaction temperature, stirring speed and equilibrium time on the preparation of the spherical calcium carbonate were studied. Spherical calcium carbonate with good dispersing performance and grain size distribution in nanometer range of less than 10 μm was obtained. Furthermore, a potassium recovery process with joint production of spherical calcium carbonate was designed. This process is technically viable and considerable in economic benefit.展开更多
A novel process aimed at the comprehensive utilization of sintering dust was developed by combining wetting grinding with sulfidization flotation. The mineralogical characteristics of the sintering dust and products w...A novel process aimed at the comprehensive utilization of sintering dust was developed by combining wetting grinding with sulfidization flotation. The mineralogical characteristics of the sintering dust and products were studied by powder wettability analysis, X-ray diffraction（XRD）, scanning electron microscopy（SEM） and mineral liberation analyzer（MLA）. It was found that the primary lead species was laurionite and most of the particles were overwrapped with KCl. Wetting grinding was shown to accelerate the dispersion of sintering dust and transform the KCl overlay to a leachate with 20.78 g/L of K＋. A lead and silver concentrate consisting of 40.82% of Pb and 0.96 kg/t of Ag was achieved, while an iron concentrate with 60.89% of Fe was gained as tailings among sulfidization flotation. The recoveries of Pb, Ag and Fe were 89.57%, 87.85% and 88.58%, respectively. The results indicate that this method is a feasible and promising process for the comprehensive utilization of sintering dust.展开更多
基金Projects(2012AA062502,2012AA06A118)supported by the National High-tech Research and Development Program of China
文摘Several physical and chemical detection methods were used to study the basic properties of sintering dust （ESP dust） collected from Baogang Steel Corporation. The result shows that the major constituents of the ESP dust are KCl, NaCl, Fe2O_3 and Fe3O_4. Water leaching experiment on the sintering dust shows that KCl in the ESP dust can be separated and recovered by water leaching and fractional crystallization. Component analysis of leaching solution indicates that the massive calcium sulfate in the leaching solution should be removed first in order to obtain the pure potassium salt. In order to provide theoretical guidance to inhibit the dissolution of calcium ions from the sintering dust, the water leaching experiment of ESP dust and the dissolution behavior of CaSO_4 in the potassium chloride, sodium chloride, potassium sulfate and their mixed salt solution were studied. It is found that, a lower liquid-solid ratio should be chosen in the leaching process to inhibit the dissolution of calcium sulfate dehydrate. Using sodium carbonate solution as a precipitating agent, the influences of the concentration of sodium carbonate solution, reaction temperature, stirring speed and equilibrium time on the preparation of the spherical calcium carbonate were studied. Spherical calcium carbonate with good dispersing performance and grain size distribution in nanometer range of less than 10 μm was obtained. Furthermore, a potassium recovery process with joint production of spherical calcium carbonate was designed. This process is technically viable and considerable in economic benefit.
基金Project(CX2015B053)supported by the Hunan Provincial Innovation Foundation for PostgraduateChinaProject(B14034)supported by National 111 Project of China
文摘A novel process aimed at the comprehensive utilization of sintering dust was developed by combining wetting grinding with sulfidization flotation. The mineralogical characteristics of the sintering dust and products were studied by powder wettability analysis, X-ray diffraction（XRD）, scanning electron microscopy（SEM） and mineral liberation analyzer（MLA）. It was found that the primary lead species was laurionite and most of the particles were overwrapped with KCl. Wetting grinding was shown to accelerate the dispersion of sintering dust and transform the KCl overlay to a leachate with 20.78 g/L of K＋. A lead and silver concentrate consisting of 40.82% of Pb and 0.96 kg/t of Ag was achieved, while an iron concentrate with 60.89% of Fe was gained as tailings among sulfidization flotation. The recoveries of Pb, Ag and Fe were 89.57%, 87.85% and 88.58%, respectively. The results indicate that this method is a feasible and promising process for the comprehensive utilization of sintering dust.
