In this experiment, red sandstone specimens, having slenderness ratios of 0.5, 0.7, 0.9 and 1.1 respectively, were subjected to blow tests using a Split Hopkinson Pressure Bar(SHPB) system at a pressure of 0.4 atmosph...In this experiment, red sandstone specimens, having slenderness ratios of 0.5, 0.7, 0.9 and 1.1 respectively, were subjected to blow tests using a Split Hopkinson Pressure Bar(SHPB) system at a pressure of 0.4 atmospheres. In this paper, we have analyzed the effect of slenderness ratio on the mechanical properties and energy dissipation characteristics of red sandstone under high strain rates. The processes of compaction, elastic deformation and stress softening deformation of specimens contract with an increase in slenderness ratio, whilst the nonlinear deformation process extends correspondingly. In addition, degrees of damage of specimens reduced gradually and the type of destruction showed a transformation trend from stretching failure towards shear failure when the slenderness ratio increased. A model of dynamic damage evolution in red sandstone was established and the parameters of the constitutive model at different ratios of length to diameter were determined. By comparison with the experimental curve, the accuracy of the model, which could reflect the stress–strain dynamic characteristics of red sandstone, was verified. From the view of energy dissipation, an increase in slenderness ratio of a specimen decreased the proportion of energy dissipation and caused a gradual fall in the capability of energy dissipation during the specimen failure process. To some extent, the study indicated the effects of slenderness ratios on the mechanical properties and energy dissipation characteristics of red sandstone under the high strain rate, which provides valuable references to related engineering designs and academic researches.展开更多
The dynamic recrystallization refinement of magnesium alloy AZ80 by compression tests was studied,and its effect on the mechanical properties was investigated.It is observed that the microstructure of the as-cast bill...The dynamic recrystallization refinement of magnesium alloy AZ80 by compression tests was studied,and its effect on the mechanical properties was investigated.It is observed that the microstructure of the as-cast billet with grain size of 240μm becomes refined to about 120,110,94 and 50μm after upsetting at 350℃ under strain rates of 0.01,0.1,1 and 10 s -1 respectively.The changes in the mechanical properties according to grain size show that yield strength significantly decreases with grain size increasing,while strain hardening exponent and micro hardness increase very sharply.Further,the grain size vs strain rate and change in Vickers micro hardness according to the various strain rates show that grain size and micro hardness decrease with strain rate increasing.展开更多
In order to meet the technical requirements of grinding the circumferential cutting edge of indexable inserts, thermo-mechanical properties of bowl-shaped grinding wheel in high speed grinding process and the influenc...In order to meet the technical requirements of grinding the circumferential cutting edge of indexable inserts, thermo-mechanical properties of bowl-shaped grinding wheel in high speed grinding process and the influence of dimension variations of the grinding wheel on machining accuracy were investigated. Firstly, the variation trends of the dimension due to centrifugal force generated in different wheel speeds were studied and the effect of stress stiffening and spin softening was presented. Triangular heat flux distribution model was adopted to determine temperature distribution in grinding process. Temperature field cloud pictures were obtained by the finite element software. Then, dimension variation trends of wheel structure were acquired by considering the thermo-mechanical characteristic under combined action of centrifugal force and grinding heat at different speeds. A method of online dynamic monitoring and automatic compensation for dimension error of indexable insert was proposed. By experimental verification, the precision of the inserts satisfies the requirement of processing.展开更多
基金Financial support for this work, provided by the National Basic Research Program of China (No. 2013CB227900)the National Natural Science Foundation of China (No. 51074166), the National Natural Science Foundation for Young (Nos. 51304200, 51304201 and 51104128)+3 种基金the Specialized Research Fund for the Doctoral Program of Higher Education of China (No. 20120095110013)the Open Fund of the State Key Laboratory of Coal Resource and Safe Mining (No. 10F08)the Colleges and Universities in Jiangsu Province Plans to Graduate Research and Innovation (No. CXLX13_935)the College Students’ Innovative Entrepreneurial Foundation of China University of Mining and Technology (No. 2013DXS03)
文摘In this experiment, red sandstone specimens, having slenderness ratios of 0.5, 0.7, 0.9 and 1.1 respectively, were subjected to blow tests using a Split Hopkinson Pressure Bar(SHPB) system at a pressure of 0.4 atmospheres. In this paper, we have analyzed the effect of slenderness ratio on the mechanical properties and energy dissipation characteristics of red sandstone under high strain rates. The processes of compaction, elastic deformation and stress softening deformation of specimens contract with an increase in slenderness ratio, whilst the nonlinear deformation process extends correspondingly. In addition, degrees of damage of specimens reduced gradually and the type of destruction showed a transformation trend from stretching failure towards shear failure when the slenderness ratio increased. A model of dynamic damage evolution in red sandstone was established and the parameters of the constitutive model at different ratios of length to diameter were determined. By comparison with the experimental curve, the accuracy of the model, which could reflect the stress–strain dynamic characteristics of red sandstone, was verified. From the view of energy dissipation, an increase in slenderness ratio of a specimen decreased the proportion of energy dissipation and caused a gradual fall in the capability of energy dissipation during the specimen failure process. To some extent, the study indicated the effects of slenderness ratios on the mechanical properties and energy dissipation characteristics of red sandstone under the high strain rate, which provides valuable references to related engineering designs and academic researches.
基金Project(cstc2009aa3012-1)supported by Science and Technology Committee of Chongqing,ChinaProject(20100470813)supported by China Postdoctoral Science FoundationProject(2010011511)supported by Sharing Fund of Chongqing University’s Large-Scale Equipment,China
文摘The dynamic recrystallization refinement of magnesium alloy AZ80 by compression tests was studied,and its effect on the mechanical properties was investigated.It is observed that the microstructure of the as-cast billet with grain size of 240μm becomes refined to about 120,110,94 and 50μm after upsetting at 350℃ under strain rates of 0.01,0.1,1 and 10 s -1 respectively.The changes in the mechanical properties according to grain size show that yield strength significantly decreases with grain size increasing,while strain hardening exponent and micro hardness increase very sharply.Further,the grain size vs strain rate and change in Vickers micro hardness according to the various strain rates show that grain size and micro hardness decrease with strain rate increasing.
基金Project(2010ZX04001-162)supported by the National Science and Technology Major Project of China
文摘In order to meet the technical requirements of grinding the circumferential cutting edge of indexable inserts, thermo-mechanical properties of bowl-shaped grinding wheel in high speed grinding process and the influence of dimension variations of the grinding wheel on machining accuracy were investigated. Firstly, the variation trends of the dimension due to centrifugal force generated in different wheel speeds were studied and the effect of stress stiffening and spin softening was presented. Triangular heat flux distribution model was adopted to determine temperature distribution in grinding process. Temperature field cloud pictures were obtained by the finite element software. Then, dimension variation trends of wheel structure were acquired by considering the thermo-mechanical characteristic under combined action of centrifugal force and grinding heat at different speeds. A method of online dynamic monitoring and automatic compensation for dimension error of indexable insert was proposed. By experimental verification, the precision of the inserts satisfies the requirement of processing.
