A new method of forming a four-port multi-antenna by a two-unit patch antenna array is proposed to design a high isolation low correlation stroll size multi-antenna. Dual polarization is real-ized by the method of fee...A new method of forming a four-port multi-antenna by a two-unit patch antenna array is proposed to design a high isolation low correlation stroll size multi-antenna. Dual polarization is real-ized by the method of feeding in two ports. Defec-ted Ground Structure （DGS） is used to eliminate the coupling between the two antenna units. The test results show that the isolation between two ports reaches around 20dB, and that the antenna correlation coefficients is less than 0. 5, which meets the requirements of future mobile communi-cation systems and provides a solution to multi-antenna of MIMO terminals.展开更多
Quantum-sized CdS-coated TiO2 nanotube array （Q-CdS-TiO2 NTA） was fabricated by the modified successive ionic layer absorption and reaction method. Scanning electron microscope and transmission electron microscope i...Quantum-sized CdS-coated TiO2 nanotube array （Q-CdS-TiO2 NTA） was fabricated by the modified successive ionic layer absorption and reaction method. Scanning electron microscope and transmission electron microscope images showed the regular structure of TiO2 NTA, where quantum-sized CdS （diameter 〈10nm） deposited on both the inside and outside of TiO2 nanotube wall. Fabrication conditions including immersing cycles, calcination temperature and drying process were well optimized, and the Q-CdS-TiO2 NTA and its photoelectrochemical （PEC） properties were characterized by X-ray fluorescence spectrometer, UV-Vis diffuse reflectance spectra and photovoltage. Distinct increases in visible light absorption and photocurrent were observed as the immersing cycle was increased from 5 to 20 times. The additional drying process accelerated the CdS crystal growth rate, and thus, the fabrication time could be shortened accordingly. Calcination temperature influenced the PEC property of Q-CdS-TiO2 NTA deeply, and the optimized calcination temperature was found as 500 ℃. As the Q-CdS-TiO2 NTA was fabricated under such condition, the visible photocurrent density increased to 2.8 mA/cm and the photovoltage between 350 and 480 nm was enhanced by 2.33 times than that without calcination. This study is expected to optimize Q-CdS-TiO2 NTA fabrication conditions for the purpose of improving its PEC performance.展开更多
基金supported by Program for New Century ExcellentTalents in University
文摘A new method of forming a four-port multi-antenna by a two-unit patch antenna array is proposed to design a high isolation low correlation stroll size multi-antenna. Dual polarization is real-ized by the method of feeding in two ports. Defec-ted Ground Structure （DGS） is used to eliminate the coupling between the two antenna units. The test results show that the isolation between two ports reaches around 20dB, and that the antenna correlation coefficients is less than 0. 5, which meets the requirements of future mobile communi-cation systems and provides a solution to multi-antenna of MIMO terminals.
基金supported by the National Natural Science Foundation of China(21377020)the Fundamental Research Funds for the Central Universities(DUT15QY17)
文摘Quantum-sized CdS-coated TiO2 nanotube array （Q-CdS-TiO2 NTA） was fabricated by the modified successive ionic layer absorption and reaction method. Scanning electron microscope and transmission electron microscope images showed the regular structure of TiO2 NTA, where quantum-sized CdS （diameter 〈10nm） deposited on both the inside and outside of TiO2 nanotube wall. Fabrication conditions including immersing cycles, calcination temperature and drying process were well optimized, and the Q-CdS-TiO2 NTA and its photoelectrochemical （PEC） properties were characterized by X-ray fluorescence spectrometer, UV-Vis diffuse reflectance spectra and photovoltage. Distinct increases in visible light absorption and photocurrent were observed as the immersing cycle was increased from 5 to 20 times. The additional drying process accelerated the CdS crystal growth rate, and thus, the fabrication time could be shortened accordingly. Calcination temperature influenced the PEC property of Q-CdS-TiO2 NTA deeply, and the optimized calcination temperature was found as 500 ℃. As the Q-CdS-TiO2 NTA was fabricated under such condition, the visible photocurrent density increased to 2.8 mA/cm and the photovoltage between 350 and 480 nm was enhanced by 2.33 times than that without calcination. This study is expected to optimize Q-CdS-TiO2 NTA fabrication conditions for the purpose of improving its PEC performance.
