地震地层体及其分析方法

地震地层体是指一种利用地震反射波所蕴含的地层反射界面特征和地层沉积特征,从地震数据中提取的一系列地震层位所组成的特殊三维数据体,是前人所提出的"相对地质年代体"和"层位体"概念的一种扩展。利用地震地层体可确定地层界面的形态及某些层状或近层状地质体的外部轮廓,并可根据不同地层界面之间的接触关系对地质构造和沉积环境进行分析。本文首先介绍地震地层体概念,然后详细描述了地震地层体分析方法及流程,最后以理论模型和实例说明这套方法具有的特点及能生成高精度地震地层体的良好应用效果。基于倾角传播技术的地震地层体分析方法能在地层倾角扫描的基础上获得高精度地震地层体,为真三维构造解释模式提供了一种实现途径。与前人所提出的层位体方法相比,本文提出的地震地层体分析具有三个特点:1利用基于最小方差法多方位倾角估算技术可获得高精度地层倾角信息;2应用倾角传播技术可提高层位追踪的准确性;3在复杂断裂区利用控制层位对追踪层位进行校正。

立体仓库PLC控制系统设计

立体仓库PLC控制装置由底盘、三列四行十二层仓位库体、巷道堆垛机、检测元件及电气控制元件组成。其设计思路包括硬件设计与软件设计两部分。在PLC软硬件设计完成后.对课题设计的立体仓库模型进行了调试,来验证其设计的可行性。

Sequence palaeogeography and coal accumulation of inland faulting basin： an example from late Triassic Yangtze platform of China

To unveil formation mechanism of key sequence boundaries of inland faulting basin and coal accumulation charac- teristics of coal seams in isochrohal stratigraphic framework, sequence stratigraphy, palaeogeographic recovery and other methods were used to research the sequence stratigraphy and coal accumulation in the example of Banding Basn in the west margin of Yangtze Platform, and the authors advanced a coal accumulation model of Faulting basin on the basis of accommo- dation space changes in the background of palaeogeography of sequence framework. The results show that： normal lacustrine regression and forced lacustrine regression are the main driving forces for the formation of sequence boundaries of Faulting ba- sin; basement subsidence is the main source of accommodation space of Faulting basin; and subsidence disequilibrium is the main cause for the difference in generation rate of accommodation space of Faulting basin. Coal accumulation in Faulting basin is obviously controlled by accommodation space changes in sequence framework and basin evolution. As Faulting basin evolves into depression basin, both subsidence rate of basin basement and generation rate of accommodation space decrease vertically, it appears as a progradational reverse-graded sedimentary sequence, coal accumulation in secondary sequence framework intensifies first and then weakens, and coal accumulation at the middle stage of highstand system tract is the best. During steady rifting period, minable coal seams were mostly developed in initial lacustrine flooding surface of fourth-order sequence and at the middle-late period of highstand system tract, and coal accumulation center lay in palaeogeographic unit of delta plain with moderate available accommodation space. During shrinking period, minable coal seams gradually migrated to the maximum lacustrine flooding surface and coal accumulation center lay in palaeographical unit of lacustrine with large available accommodation space.

Preparation of insoluble β-CD polymer and its application to enantiomers and isomers separation

An insoluble β-cyclodextrin polymer cross-linked with epichlorohydrin was prepared, and its structure was identified with infrared spectrum. Colloid stationary phase was prepared by dissolving the polymer in the mixed solvent of diisopropyl ether, methylene dichloride and benzene and treated for 0.5 h by ultrasonication, and then was coated on a fused silica capillary column. The optimun reaction conditions are as follows: the mole ratio of epichlohydrin to β-cyclodextrin is 12.1:1, reacting at 65 °C for 24 h. The Chromatographic performance such as column efficiency, thermal stabilities and polarity were studied, two kinds of disubstituted benzene isomers and eight pairs of enantiomers were separated on the capillary column. The results show that the β-cyclodextrin polymer is suitable for use as a capillary gas chromatographic stationary phase, and possess excellent chromatographic properties in separating enantiomers and position isomers.

Asymmetric Green's functions for exponentially graded transversely isotropic substrate–coating system

By virtue of a complete set of two displacement potentials,an analytical derivation of the elastostatic Green’s functions of an exponentially graded transversely isotropic substrate–coating system is presented.Three-dimensional point–load and patch–load Green’s functions for stresses and displacements are given in line-integral representations.The formulation includes a complete set of transformed stress–potential and displacement–potential relations,with utilizing Fourier series and Hankel transforms.As illustrations,the present Green’s functions are degenerated to the special cases such as an exponentially graded half-space and a homogeneous two-layered half-space Green’s functions.Because of complicated integrand functions,the integrals are evaluated numerically and for numerical computation of the integrals,a robust and effective methodology is laid out which gives the necessary account of the presence of singularities of integration.Comparisons of the existing numerical solutions for homogeneous two-layered isotropic and transversely isotropic half-spaces are made to confirm the accuracy of the present solutions.Some typical numerical examples are also given to show the general features of the exponentially graded two-layered half-space Green’s functions that the effect of degree of variation of material properties will be recognized.

Permian sequence stratigraphy of shallow water basin in Tarim Basin

Based on analysis of drilling, logging and field profile data, six sequence boundaries in Permian are identified in Bachu and Tazhong regions of Tarim Basin. All sequence boundaries are of type I sequence bound- aries, and are characterized by down cut. According to the six sequence boundaries, the Permian in this area can be divided into 5 third-order sequences, and all the sequences correspond with classic sequence model of Vail. Sequence Psq4 indicates lake transgressive system tract （TST） and highstand system tract （HST）. Se- quences Psql, Psq2, Psq3, Psq5 indicate low stand system tract （ LST）, transgressive system tract and high- stand system tract. LST is deposited by incised channel infilling with features of fluvial facies. TST is deposited by shore-shallow lake and semi-deep lake. HST is deposited by semi-deep lake, shore-shallow lake and delta. In addition, volcanic rocks are present on the top part of HST in sequence Psq3. Incised channel infilling and deltaic deposits were mainly distributed on western slope of Tadong uplift.

Preparation of defect free ceramic/Ti composite membranes by surface modification and in situ oxidation

Al2O3 ceramic powder was applied to modify the large pores defects on the surface of the porous metal Ti support,in situ oxidation method was a convenient method to prepare defect free ceramic/Ti composite membranes on this basis.In situ oxidation conditions experimental results show that the best condition for preparing the TiO2-Al2O3/Ti composite membrane is under 800°C for 2 h,and the microstructure and pore sizes of the TiO2-Al2O3/Ti composite membranes are affected obviously.The thickness and composition of the TiO2/Ti composite membranes are determined by SEM and XRD completely.The pore size distribution of the composite membrane is measured by bubble pressure method,the most probable aperture is about 3.12μm,while the average pore size of defect free TiO2-Al2O3/Ti is about 3.23μm.After ultrasonic treatment,the slight weight change of membranes reveals no observable change,which indicates that TiO2-Al2O3/Ti composite membranes maintain a good stability.

Construction of Wave-free Potentials and Multipoles in a Two-layer Fluid Having Free-surface Boundary Condition with Higher-order Derivatives

There is a large class of problems in the field of fluid structure interaction where higher-order boundary conditions arise for a second-order partial differential equation. Various methods are being used to tackle these kind of mixed boundary-value problems associated with the Laplace’s equation （or Helmholtz equation） arising in the study of waves propagating through solids or fluids. One of the widely used methods in wave structure interaction is the multipole expansion method. This expansion involves a general combination of a regular wave, a wave source, a wave dipole and a regular wave-free part. The wave-free part can be further expanded in terms of wave-free multipoles which are termed as wave-free potentials. These are singular solutions of Laplace’s equation or two-dimensional Helmholz equation. Construction of these wave-free potentials and multipoles are presented here in a systematic manner for a number of situations such as two-dimensional non-oblique and oblique waves, three dimensional waves in two-layer fluid with free surface condition with higher order partial derivative are considered. In particular, these are obtained taking into account of the effect of the presence of surface tension at the free surface and also in the presence of an ice-cover modelled as a thin elastic plate. Also for limiting case, it can be shown that the multipoles and wave-free potential functions go over to the single layer multipoles and wave-free potential.

Study of the Influence of the Electrolysis Parameters on Mn-Zn, Mn-Cu and Mn-Cu-Zn Alloys Coatings from Electrolytes Containing Complexing Ligands

The process of obtaining of high quality Mn-Zn, Mn-Cu and Mn-Cu-Zn alloy coatings from complexing ligands--citrate, EDTA （ethylene diaminetetra acetic acid） and nitrilotriacetic acid solutions was studied. Factors affecting stability of solutions containing ligand or ligands and influence of electrolysis parameters： electrolyte composition, pH, cathodic current density on chemical composition of the obtained coatings, on their current efficiency, morphology and structure were investigated.

Fractured zone height of longwall mining and its effects on the overburden aquifers

As mining depth becomes deeper and deeper,the possibility of undermining overburden aquifers is increasing.It is very important for coal miners to undertake studies on the height of fractured zone during longwall mining and the effects of longwall mining on the underground water while mining under surface water bodies and underground aquifers.In order to study this problem,piezometers for monitoring underground water levels were installed above the longwall panels in an American coalmine.Large amounts of pre-mining,during mining and post-mining monitoring data were collected.Based on the data,the heights of fractured zones were obtained and the effects of longwall mining on the underground water were studied.The results demonstrate that when the piezometer monitoring wells had an interburden thickness of less than 72.7 m,the groundwater level decreased immediately to immeasurable levels and the wells went dry after undermining the face of longwall.The height of the fractured zone is 72.7-85.3 m in the geological and mining conditions.The results also show that the calculated values of fractured zones by the empirical formulae used in China are smaller than the actual results.Therefore,it is not always safe to use them for analyses while mining under water bodies.

Deep Semantic Structure of Natural Language

This paper presents the result of research of deep structure of natural language. The main result attained is the existence of a deterministic mathematical model that relates phonetics to associated mental images starting from the simplest linguistic units in agreement with the human response to different acoustic stimuli. Moreover, there exists two level hierarchy for natural language understanding. The first level uncovers the conceptual meaning of linguistic units, and hence forming a corresponding mental image. At the second level the operational meaning is found to suit, context, pragmatics, and world knowledge. This agrees with our knowledge about human cognition. The resulting model is parallel, hierarchical but still concise to explain the speed of natural language understanding.

A new plasmapause location model based on THEMIS observations

A new empirical model of plasmapause location as functions of magnetic local time and geomagnetic indices has been developed based on the observations from THEMIS mission. We use the two-year data of electron density inferred from spacecraft potential to identify the plasmapause crossings and create a database of plasmapause locations. The database is further used to build up an empirical model of plasmapause related to magnetic local time based on the equation from O'Brien and Moldwin(2003). The new model is compared with previous plasmapause location models. It is found that our newly developed model is the best in predicting plasmapause locations among the existing models. The models based on Kp and Dst indices are better than the model based on AE index, suggesting that the plasmapause location is controlled by large scale convection of the magnetosphere.

Prediction of hypersonic boundary layer transition with variable specific heat on plane flow

When an aircraft flies at a hypersonic speed,the temperature of gas inner boundary layer near the wall is so high that the specific heat is no longer a constant but dependent upon the temperature.It is necessary to consider its effect on transition location.In this paper,the transition locations of hypersonic plane boundary layer are predicted with the improved e N method,and the results of the specific heat dependent upon temperature are compared with those of constant specific heat.The flow parameters are taken as those corresponding to the condition at a height of 40 km and the Mach numbers of oncoming flow are 6,7,and 8,respectively.It is found that the transition locations calculated by the variable specific heat are closer to the leading edge than those by the constant specific heat.The deviations in most cases are around 30 percent.All the results prove that the real gas effect should be taken into consideration when one predicts transition location for hypersonic flow.Whether the first or second mode wave determines the transition location relies on the oncoming flow Mach number and the wall condition.

Plasmaspheric trough evolution under different conditions of subauroral ion drift

The statistical characteristics of the subauroral ion drift (SAID) in the ionosphere and the plasmaspheric trough evolution under different conditions of SAID were investigated in this paper, based on 566 SAID events observed by Akebono, Astrid-2, DE-2, and Freja satellites. The relationships between the latitudinal location of SAID and the Kp, AL, and Dst indices for these events were also discussed. It was found that the SAID events happened mainly at invariant latitude (ILAT) of 60.4° and magnetic local time (MLT) of 21.6 MLT and that 92.4% of the events happened when the Kp index was below 5.0, indicating a medium geomagnetic activity. The latitudinal half-width of SAID varied from 0.5° to 3.0° with a typical half-width of 1.0°. The SAID would happen at low latitudes if the geomagnetic activity was high. The effects of SAID on equatorial outer plas- masphere trough evolutions were studied with the dynamic global core plasma model (DGCPM) driven by the statistical results of SAID signatures. It was noted that locations, shapes and density of troughs vary with ILAT, MLT, latitudinal width, cross polar cap potential and lifetime of SAID events. The evolution of a trough is determined by the extent of SAID electric field penetrating into plasmasphere and not all SAID events can result in trough formations.

Novel ionic liquid based electrolyte for double layer capacitors with enhanced high potential stability

Developing electrolyte with high electrochemical stability is the most effective way to improve the energy density of double layer capacitors(DLCs), and ionic liquid is a promising choice. Herein, a novel ionic liquid based high potential electrolyte with a stabilizer, succinonitrile, was proposed to improve the high potential stability of the DLC. The electrolyte with 7.5 wt% succinonitrile added has a high ionic conductivity of 41.1 m S cm^(-1) under ambient temperature, and the DLC adopting this electrolyte could be charged to 3.0 V with stable cycle ability even under a discharge current density of 6 A g^(-1). Moreover, the energy density could be increased by 23.4% when the DLC was charged to 3.0 V compared to that charged to 2.7 V.