期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
修正层状A相液晶的声学波模式下方程的结果
1
作者 张辉 周蕾 《应用物理》 2012年第4期145-149,共5页
本文用数学的严格求解的方法,对层状A相液晶模型在声学波模式下,所得到的方程组进行更加严格地讨论,分别从物理学现象角度和数学理论角度得到结论,并进行对比。并得到数学严格解是物理现象学角度解的一种极限情况。从而修正了原本仅从... 本文用数学的严格求解的方法,对层状A相液晶模型在声学波模式下,所得到的方程组进行更加严格地讨论,分别从物理学现象角度和数学理论角度得到结论,并进行对比。并得到数学严格解是物理现象学角度解的一种极限情况。从而修正了原本仅从现象得到的结果,是对于原有结果的一种补充。 展开更多
关键词 层状A液晶 声学波 数学理论
下载PDF
甲壳型液晶高分子的分子形状和相结构调控:从片状分子到柱状分子和从层状相到柱状相 被引量:1
2
作者 郑军峰 葛云翀 +3 位作者 程晓帆 吴雅婷 徐鹏 陈尔强 《高分子学报》 SCIE CAS CSCD 北大核心 2023年第9期1343-1354,共12页
为调控甲壳型液晶高分子(MJLCPs)的分子形状和相结构,以“苯-苄酯-苯”为柔性连接基团设计了一个新的MJCLP 1P,为对比研究,又设计了一个化学结构相似但含有“苯-酯-苯”刚性连接基团的MJLCP 2P.研究结果表明,参考聚合物2P呈现稳定的层... 为调控甲壳型液晶高分子(MJLCPs)的分子形状和相结构,以“苯-苄酯-苯”为柔性连接基团设计了一个新的MJCLP 1P,为对比研究,又设计了一个化学结构相似但含有“苯-酯-苯”刚性连接基团的MJLCP 2P.研究结果表明,参考聚合物2P呈现稳定的层状液晶相,其分子形状应为片状构象;目标聚合物1P低温时形成层状液晶相,高温则为柱状液晶相,其分子形状应分别为片状和棒状.本研究提出了1P的分子形状和相转变的机理:低温时,“苯-苄酯-苯”采取反式构象,侧链类似于棒状液晶基元,整个分子为片状,进而形成层状液晶相;高温时,“苯-苄酯-苯”采取旁氏构象,侧链对主链的甲壳效应增加,驱动整个分子为棒状,进而形成柱状液晶相.通过在MJLCPs的侧链中引入“苯-苄酯-苯”柔性连接基团,实现了MJLCPs的分子形状和相结构调控. 展开更多
关键词 甲壳型液晶高分子 层状液晶相 柱状液晶 片状分子 柱状分子
原文传递
Self-assembly and UV-curing Property of Polymerized Lyotropic Liquid Crystal Monomer of Sodium 3,4,5-tris(ll-acryloxyundecyloxy)benzoate 被引量:1
3
作者 白玉勤 郭金宝 +1 位作者 王影 魏杰 《Chinese Journal of Chemical Physics》 SCIE CAS CSCD 2013年第1期95-101,I0004,共8页
A polymerized lyotropic liquid crystal monomer of sodium 3,4,5-tris(11-acryloxyundecyloxy)- benzoate was synthesized by a convenient route starting from 3,4,5-trihydroxybenzoic acid via esterification followed by et... A polymerized lyotropic liquid crystal monomer of sodium 3,4,5-tris(11-acryloxyundecyloxy)- benzoate was synthesized by a convenient route starting from 3,4,5-trihydroxybenzoic acid via esterification followed by etherification, acylation and finally neutralization. The chemi- cal structure was confirmed by Fourier transform infrared (FT-IR) and 1H nuclear magnetic resonance spectral analysis. The self-organization behavior of the monomer with deionized water in methanol at room temperature was also demonstrated. The assemblies were char- acterized by polarized optical microscope and X-ray diffraction. The results show that a solution containing 80:20 of the monomer to water was found to be able to self-organize into Lamellar (La) phase and 92:8 with inverted hexagonal (H]I) phase, which was in ac- cordance with the theoretical calculation of critical packing parameter. It suggests that the concentration of the monomer was the key factor to influence assembly structure. Addi- tionally, the acrylate conversion with different photoinitiators and nanostructure retention after polymerization were investigated. The research shows that the acrylate conversion of the monomer with Darocur2959 could reach up to 78% when irradiated by 30 mW/cm2 UV light of 365 nm for 30 min characterized by Real-time FT-IR as well as the sol-gel method. Meanwhile, the La and HII phase nanostructures were both retained after polymerization. 展开更多
关键词 Polymerized lyotropic liquid crystal SELF-ASSEMBLY La phase HII phase UV-CURING
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部