目的探讨压缩感知结合层面编码金属伪影校正(compressed sensing-slice-encoding metal artifact correction,CS-SEMAC)技术用于脊柱金属植入物术后MRI的应用价值。材料与方法比较招募的35例脊柱金属植入物术后患者3.0 T MRI矢状位CS-SE...目的探讨压缩感知结合层面编码金属伪影校正(compressed sensing-slice-encoding metal artifact correction,CS-SEMAC)技术用于脊柱金属植入物术后MRI的应用价值。材料与方法比较招募的35例脊柱金属植入物术后患者3.0 T MRI矢状位CS-SEMAC序列、高带宽(high bandwidth,HBW)序列和水脂分离(Dixon)三种序列在金属植入物伪影面积、椎体信噪比(signal-to-noise ratio,SNR)、图像质量、图像清晰度、脂肪抑制效果以及植入物周围解剖结构的可见性方面的差异。结果CS-SEMAC在T1、T2矢状位图像上金属伪影面积分别为(15.45±6.84)、(22.23±9.76)cm^(2),显著低于其他两种序列,差异具有统计学意义(P<0.001);三种序列在T2抑脂矢状面图像上的SNR两两比较显示:HBW序列椎体SNR显著高于其他两种序列,Dixon序列椎体SNR显著低于其他两种序列,CS-SEMAC序列椎体SNR低于HBW序列,高于Dixon序列,差异均有统计学意义(P<0.001);在图像清晰度上,T2WI-tirm-CS-SEMAC序列评分低于其他两种序列,差异具有统计学意义(P<0.001);T2WI-tirm-CS-SEMAC序列在图像质量和脂肪抑制效果方面评分显著优于其他两种序列,差异具有统计学意义(P<0.001);并且CS-SEMAC序列相较于其他两种序列更能清晰显示植入物周围椎体、椎弓根、椎间孔及神经根,差异具有统计学意义(P<0.001)。结论CS-SEMAC序列相比于HBW、Dixon序列能够有效减少植入物周围的金属伪影,并且能显著提高T2抑脂序列的图像质量和脂肪抑制效果,虽然在T2抑脂上金属植入物邻近椎体SNR相比HBW序列有所下降,图像比HBW和Dixon图像略模糊,但是椎体周围关键解剖结构的可见度明显提升,对脊柱术后解剖结构的显示有一定优势。展开更多
Carbon/carbon composites modified by NiAl alloy were prepared using vacuum reactive melt infiltration methods with NiAl and titanium mixed powders as raw materials. The microstructures were investigated by scanning el...Carbon/carbon composites modified by NiAl alloy were prepared using vacuum reactive melt infiltration methods with NiAl and titanium mixed powders as raw materials. The microstructures were investigated by scanning electron microscopy. The fracture behavior, infiltration and oxidation mechanism were further discussed. The results indicated that NiAl alloy exhibited good wettability on the C/C preform because a TiC reaction layer formed at the interface. Multi-layer（PyC/TiC/NiAl＋TiC） coating evenly and compactly distributed on the surface of the carbon fiber in tubular form. The penetration depth of molten NiAl alloys depended on the reaction between the PyC and titanium. The impact fracture was inclined to along the interface between the NiAl permeability layer and C/C matrix. Al_2TiO_5 and TiO_2 formed on the surface, while the interior multi-layer tubular structure partially remained after oxidation at 1773 K for 30 min.展开更多
The interfacial interaction existing in the Ni ZrO 2 composite plating has been investigated. The experimental results show that no new phases were formed in the interfacial regions between matrix Ni and ZrO 2 part...The interfacial interaction existing in the Ni ZrO 2 composite plating has been investigated. The experimental results show that no new phases were formed in the interfacial regions between matrix Ni and ZrO 2 particles, but an orbital interaction through the mutual overlap of the d orbits does exist in the interfacial regions between Ni atoms and Zr 3+ ions.展开更多
文摘目的探讨压缩感知结合层面编码金属伪影校正(compressed sensing-slice-encoding metal artifact correction,CS-SEMAC)技术用于脊柱金属植入物术后MRI的应用价值。材料与方法比较招募的35例脊柱金属植入物术后患者3.0 T MRI矢状位CS-SEMAC序列、高带宽(high bandwidth,HBW)序列和水脂分离(Dixon)三种序列在金属植入物伪影面积、椎体信噪比(signal-to-noise ratio,SNR)、图像质量、图像清晰度、脂肪抑制效果以及植入物周围解剖结构的可见性方面的差异。结果CS-SEMAC在T1、T2矢状位图像上金属伪影面积分别为(15.45±6.84)、(22.23±9.76)cm^(2),显著低于其他两种序列,差异具有统计学意义(P<0.001);三种序列在T2抑脂矢状面图像上的SNR两两比较显示:HBW序列椎体SNR显著高于其他两种序列,Dixon序列椎体SNR显著低于其他两种序列,CS-SEMAC序列椎体SNR低于HBW序列,高于Dixon序列,差异均有统计学意义(P<0.001);在图像清晰度上,T2WI-tirm-CS-SEMAC序列评分低于其他两种序列,差异具有统计学意义(P<0.001);T2WI-tirm-CS-SEMAC序列在图像质量和脂肪抑制效果方面评分显著优于其他两种序列,差异具有统计学意义(P<0.001);并且CS-SEMAC序列相较于其他两种序列更能清晰显示植入物周围椎体、椎弓根、椎间孔及神经根,差异具有统计学意义(P<0.001)。结论CS-SEMAC序列相比于HBW、Dixon序列能够有效减少植入物周围的金属伪影,并且能显著提高T2抑脂序列的图像质量和脂肪抑制效果,虽然在T2抑脂上金属植入物邻近椎体SNR相比HBW序列有所下降,图像比HBW和Dixon图像略模糊,但是椎体周围关键解剖结构的可见度明显提升,对脊柱术后解剖结构的显示有一定优势。
基金Project(2011CB605804) supported by the National Basic Research Development Program of ChinaProject(2015JJ3167) supported by the Natural Science Foundation of Hunan Province,ChinaProject(2013M531810) supported by the Postdoctoral Science Foundation of China
文摘Carbon/carbon composites modified by NiAl alloy were prepared using vacuum reactive melt infiltration methods with NiAl and titanium mixed powders as raw materials. The microstructures were investigated by scanning electron microscopy. The fracture behavior, infiltration and oxidation mechanism were further discussed. The results indicated that NiAl alloy exhibited good wettability on the C/C preform because a TiC reaction layer formed at the interface. Multi-layer（PyC/TiC/NiAl＋TiC） coating evenly and compactly distributed on the surface of the carbon fiber in tubular form. The penetration depth of molten NiAl alloys depended on the reaction between the PyC and titanium. The impact fracture was inclined to along the interface between the NiAl permeability layer and C/C matrix. Al_2TiO_5 and TiO_2 formed on the surface, while the interior multi-layer tubular structure partially remained after oxidation at 1773 K for 30 min.
文摘The interfacial interaction existing in the Ni ZrO 2 composite plating has been investigated. The experimental results show that no new phases were formed in the interfacial regions between matrix Ni and ZrO 2 particles, but an orbital interaction through the mutual overlap of the d orbits does exist in the interfacial regions between Ni atoms and Zr 3+ ions.
