A methodological innovation in the study of crystal vacancies comes from Schaefer et al . Their technique allows contact free measurements as a function of time, up to high temperature and without contamination. It ap...A methodological innovation in the study of crystal vacancies comes from Schaefer et al . Their technique allows contact free measurements as a function of time, up to high temperature and without contamination. It apppears that the approach of schaefer could be used directly measure vacancy concentration after various heat treatments and then could help check the George Baleer theory of anomalous yield stress in FeAl.展开更多
Deformation behavior and microstructure of AlMg6Mn alloy subjected to shear spinning were studied by means of mechanical characterization, optical and SEM＋EDS microscopy. Specimens were shear spun on an industrial sp...Deformation behavior and microstructure of AlMg6Mn alloy subjected to shear spinning were studied by means of mechanical characterization, optical and SEM＋EDS microscopy. Specimens were shear spun on an industrial spinning machine using different mandrels, providing reductions of wall thickness of 30%, 50% and 68%. The grain structure developed during shear spinning refines gradually. The grains elongate in axial direction with increase of reduction, and also stretches along circumferencial direction. Optimal combination of strength and elongation is observed. This is attributed to grain refinement and dislocation reactions with particles and atoms of Mg and Mn in solid solution.展开更多
Cemented paste backfill(CPB) is largely used in underground mines worldwide.A key issue associated with application of CPB is to estimate the stresses in backfilled stopes and on barricades.Recent numerical and experi...Cemented paste backfill(CPB) is largely used in underground mines worldwide.A key issue associated with application of CPB is to estimate the stresses in backfilled stopes and on barricades.Recent numerical and experimental results show that arching effect is absent shortly after the placement of CPB in stopes.However,stress decreases in barricade drift with increasing distance between the measurement points and drawpoint have also been observed,demonstrating arching effect shortly after the pouring of CPB.To explain these paradoxes,CPB is considered as Bingham fluid having a yield shear stress.Three dimensional analytical solutions are proposed to evaluate the short-term total stresses in backfilled stopes and on barricades,accounting for the CPB's yield shear stress-induced arching effect.Stress diminution due to such arching effect in the backfilled stopes and on barricades is indeed obtained.But the reduction becomes insignificant using typical yield shear stress and stope geometry.More analyses indicate that the typical yield shear stress values do not fully correspond to field conditions where the yield shear stress would increase exponentially due to apparent consolidation(loss of water by drainage,a phenomenon similar to the desiccation of overly saturated fine-grained materials).展开更多
The Ce/Cr coating was homogenously deposited onto the reticulated open-cell Ni?Cr?Fe alloy foam by the pack cementation process.The mechanical properties of the Ce/Cr coated alloy foams were investigated by the quasi-...The Ce/Cr coating was homogenously deposited onto the reticulated open-cell Ni?Cr?Fe alloy foam by the pack cementation process.The mechanical properties of the Ce/Cr coated alloy foams were investigated by the quasi-static compression test.Simultaneously,the deformation and failure mechanisms of Ce/Cr coated alloy foams were discussed.The results show that the adding amount of CeO2powders influences the mechanical properties of the Ce/Cr coated alloy foams.Despite an increase in density as compared to the uncoated foams,the Ce/Cr coated foams exhibit improvement in both yield strength and energy-absorption performance.Especially,the energy-absorption performance of2%Ce/Cr(mass fraction)coated alloy foam is averagely1.9times as high as that of the bare Ni?Cr?Fe alloy foam.In addition,the mechanical properties of the Ce/Cr coated alloy foams increase with the increase of strain rate.The distortion and cracking are mainly the deformation behavior of the Ce/Cr coated alloy foam,confirmed by SEM images.展开更多
文摘A methodological innovation in the study of crystal vacancies comes from Schaefer et al . Their technique allows contact free measurements as a function of time, up to high temperature and without contamination. It apppears that the approach of schaefer could be used directly measure vacancy concentration after various heat treatments and then could help check the George Baleer theory of anomalous yield stress in FeAl.
文摘Deformation behavior and microstructure of AlMg6Mn alloy subjected to shear spinning were studied by means of mechanical characterization, optical and SEM＋EDS microscopy. Specimens were shear spun on an industrial spinning machine using different mandrels, providing reductions of wall thickness of 30%, 50% and 68%. The grain structure developed during shear spinning refines gradually. The grains elongate in axial direction with increase of reduction, and also stretches along circumferencial direction. Optimal combination of strength and elongation is observed. This is attributed to grain refinement and dislocation reactions with particles and atoms of Mg and Mn in solid solution.
基金the Natural Sciences and Engineering Research Council of Canada(NSERC)Institut de recherche Robert-Sauve en sante et en securite du travail(IRSST)industrial partners of the Research Institute on Mines and the Environment(RIME UQAT-Polytechnique)
文摘Cemented paste backfill(CPB) is largely used in underground mines worldwide.A key issue associated with application of CPB is to estimate the stresses in backfilled stopes and on barricades.Recent numerical and experimental results show that arching effect is absent shortly after the placement of CPB in stopes.However,stress decreases in barricade drift with increasing distance between the measurement points and drawpoint have also been observed,demonstrating arching effect shortly after the pouring of CPB.To explain these paradoxes,CPB is considered as Bingham fluid having a yield shear stress.Three dimensional analytical solutions are proposed to evaluate the short-term total stresses in backfilled stopes and on barricades,accounting for the CPB's yield shear stress-induced arching effect.Stress diminution due to such arching effect in the backfilled stopes and on barricades is indeed obtained.But the reduction becomes insignificant using typical yield shear stress and stope geometry.More analyses indicate that the typical yield shear stress values do not fully correspond to field conditions where the yield shear stress would increase exponentially due to apparent consolidation(loss of water by drainage,a phenomenon similar to the desiccation of overly saturated fine-grained materials).
基金Project(51501133)supported by the National Natural Science Foundation of ChinaProject(T201629)supported by the Universities of Hubei Province Outstanding Young Scientific and Technological Innovation Team Plans,ChinaProject(AWJ-M16-11)supported by the State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology,China
文摘The Ce/Cr coating was homogenously deposited onto the reticulated open-cell Ni?Cr?Fe alloy foam by the pack cementation process.The mechanical properties of the Ce/Cr coated alloy foams were investigated by the quasi-static compression test.Simultaneously,the deformation and failure mechanisms of Ce/Cr coated alloy foams were discussed.The results show that the adding amount of CeO2powders influences the mechanical properties of the Ce/Cr coated alloy foams.Despite an increase in density as compared to the uncoated foams,the Ce/Cr coated foams exhibit improvement in both yield strength and energy-absorption performance.Especially,the energy-absorption performance of2%Ce/Cr(mass fraction)coated alloy foam is averagely1.9times as high as that of the bare Ni?Cr?Fe alloy foam.In addition,the mechanical properties of the Ce/Cr coated alloy foams increase with the increase of strain rate.The distortion and cracking are mainly the deformation behavior of the Ce/Cr coated alloy foam,confirmed by SEM images.
