In order to solve the surrounding rock control problem of large section gangue replacement roadway under complicated conditions, this paper analyzed the impact to the roadway controlling produced by the geological con...In order to solve the surrounding rock control problem of large section gangue replacement roadway under complicated conditions, this paper analyzed the impact to the roadway controlling produced by the geological conditions such as high ground stress, folded structure tilted roof asymmetry and soft wall rock, and built the tilt layered roof structural mechanics model to clarify the increase span mechanism of the weak coal instability. Then, we proposed the combined control system including roof inclined truss cable, coal-side cable-channel steel and intensive bolt support. And then by building the structural mechanics model of roof inclined truss cable system, the support principle was described. Besides, according to this model, we deduced the calculation formula of cable anchoring force and its tensile stress. Finally surrounding rock control technology of large section roadway in fold coal pillar area was formed. Field practice shows that the greatest roof convergence of gangue replacement roadway is 158 mm and coal-side deformation is 243 mm. Roadway deformation is controlled effectively and technical support is provided for replacement mining.展开更多
In this paper,the wind load on an arc-shaped canopy roof was studied with numerical wind tunnel method(NWTM) .Three-dimensional models were set up for the canopy roof with opened or closed skylights.The air flow aroun...In this paper,the wind load on an arc-shaped canopy roof was studied with numerical wind tunnel method(NWTM) .Three-dimensional models were set up for the canopy roof with opened or closed skylights.The air flow around the roof under wind action from three directions was analysed respectively.Wind pressure coefficients on the canopy roof were determined by NWTM.The results of NWTM agreed well with those of wind tunnel test for the roof with opened skylights,which verified the applicability and rationality of NWTM.The effect of the closure of skylights was then investigated with NWTM.It was concluded that the closure of the skylights may increase the wind suction on the top surface of the roof greatly and should be considered in the structure design of the canopy roof.展开更多
Compared with Gaussian wind loads, there is a higher probability of strong suction fluctuations occurrence for non-Gaussian wind pressures. These instantaneous and intermittent fluctuations are the initial cause of lo...Compared with Gaussian wind loads, there is a higher probability of strong suction fluctuations occurrence for non-Gaussian wind pressures. These instantaneous and intermittent fluctuations are the initial cause of local damage to roof structures, par- ticularly at the edges and comers of long-span roofs. Thus, comparative errors would occur if a Gaussian model is used to de- scribe a non-Gaussian wind load, and structural security would not be guaranteed. This paper presents a simplified method based on the inverse fast Fourier transform （IFFT）, in which the amplitude spectrum is established via a target power spectrum. Also, the phase spectrum is constructed by introducing the exponential peak generation （EPG） model. Finally, a random pro- cess can be generated via IFFT that meets the specified power spectral density （PSD）, skewness and kurtosis. In contrast to a wind tunnel experiment, this method can avoid the coupled relation between the non-Gaussian and the power spectrum char- acteristics, and lead to the desired computational efficiency. Its fitting accuracy is not affected by phase spectrum. Moreover, the fitting precision of the kurtosis and PSD parameters can be guaranteed. In a few cases, the fitting precision of the skewness parameter is fairly poor, but kurtosis is more important than skewness in the description of the non-Gaussian characteristics. Above all, this algorithm is simple and stable and would be an effective method to simulate a non-Gaussian signal.展开更多
文摘In order to solve the surrounding rock control problem of large section gangue replacement roadway under complicated conditions, this paper analyzed the impact to the roadway controlling produced by the geological conditions such as high ground stress, folded structure tilted roof asymmetry and soft wall rock, and built the tilt layered roof structural mechanics model to clarify the increase span mechanism of the weak coal instability. Then, we proposed the combined control system including roof inclined truss cable, coal-side cable-channel steel and intensive bolt support. And then by building the structural mechanics model of roof inclined truss cable system, the support principle was described. Besides, according to this model, we deduced the calculation formula of cable anchoring force and its tensile stress. Finally surrounding rock control technology of large section roadway in fold coal pillar area was formed. Field practice shows that the greatest roof convergence of gangue replacement roadway is 158 mm and coal-side deformation is 243 mm. Roadway deformation is controlled effectively and technical support is provided for replacement mining.
文摘In this paper,the wind load on an arc-shaped canopy roof was studied with numerical wind tunnel method(NWTM) .Three-dimensional models were set up for the canopy roof with opened or closed skylights.The air flow around the roof under wind action from three directions was analysed respectively.Wind pressure coefficients on the canopy roof were determined by NWTM.The results of NWTM agreed well with those of wind tunnel test for the roof with opened skylights,which verified the applicability and rationality of NWTM.The effect of the closure of skylights was then investigated with NWTM.It was concluded that the closure of the skylights may increase the wind suction on the top surface of the roof greatly and should be considered in the structure design of the canopy roof.
基金supported by the National Natural Science Fund for Distinguished Young Scholars (Grant No. 51125031)
文摘Compared with Gaussian wind loads, there is a higher probability of strong suction fluctuations occurrence for non-Gaussian wind pressures. These instantaneous and intermittent fluctuations are the initial cause of local damage to roof structures, par- ticularly at the edges and comers of long-span roofs. Thus, comparative errors would occur if a Gaussian model is used to de- scribe a non-Gaussian wind load, and structural security would not be guaranteed. This paper presents a simplified method based on the inverse fast Fourier transform （IFFT）, in which the amplitude spectrum is established via a target power spectrum. Also, the phase spectrum is constructed by introducing the exponential peak generation （EPG） model. Finally, a random pro- cess can be generated via IFFT that meets the specified power spectral density （PSD）, skewness and kurtosis. In contrast to a wind tunnel experiment, this method can avoid the coupled relation between the non-Gaussian and the power spectrum char- acteristics, and lead to the desired computational efficiency. Its fitting accuracy is not affected by phase spectrum. Moreover, the fitting precision of the kurtosis and PSD parameters can be guaranteed. In a few cases, the fitting precision of the skewness parameter is fairly poor, but kurtosis is more important than skewness in the description of the non-Gaussian characteristics. Above all, this algorithm is simple and stable and would be an effective method to simulate a non-Gaussian signal.
