Based on the similarity theory,a tunnel excavation simulation testing system under typical unsymmetrical loading conditions was established.Using this system,the failure mechanism of surrounding rock of shallow-bias t...Based on the similarity theory,a tunnel excavation simulation testing system under typical unsymmetrical loading conditions was established.Using this system,the failure mechanism of surrounding rock of shallow-bias tunnels with small clear distance was analyzed along with the load characteristics.The results show that:1) The failure process of surrounding rock of shallow-bias tunnels with small clear distance consists of structural and stratum deformation induced by tunnel excavation; Microfracture surfaces are formed in the tunnel surrounding rock and extend deep into the rock mass in a larger density; Tensile cracking occurs in shallow position on the deep-buried side,with shear slip in deep rock mass.In the meantime,rapid deformation and slip take place on the shallow-buried side until the surrounding rocks totally collapse.The production and development of micro-fracture surfaces in the tunnel surrounding rock and tensile cracking in the shallow position on the deep-buried side represent the key stages of failure.2) The final failure mode is featured by an inverted conical fracture with tunnel arch as its top and the slope at tunnel entrance slope as its bottom.The range of failure on the deep-buried side is significantly larger than that on the shallow-buried side.Such difference becomes more prominent with the increasing bias angle.What distinguishes it from the "linear fracture surface" model is that the model proposed has a larger fracture angle on the two sides.Moreover,the bottom of the fracture is located at the springing line of tunnel arch.3) The total vertical load increases with bias angle.Compared with the existing methods,the unsymmetrical loading effect in measurement is more prominent.At last,countermeasures are proposed according to the analysis results: during engineering process,1) The surrounding rock mass on the deep-buried side should be reinforced apart from the tunnel surrounding rock for shallow-buried tunnels with small clear distance; moreover,the scope of consolidation should go beyond the midline of tunnel(along the direction of the top of slope) by 4 excavation spans of single tunnel.2) It is necessary to modify the load value of shallow-bias tunnels with small clear distance.展开更多
It is extremely important to study and understand the deformation behavior and strength characteristics of rocks under thermal-mechanical （TM） coupling effects. Failure behavior and strength characteristics of Pingd...It is extremely important to study and understand the deformation behavior and strength characteristics of rocks under thermal-mechanical （TM） coupling effects. Failure behavior and strength characteristics of Pingdingshan sandstone were investigated at room temperatures up to 300℃ in an internally heated apparatus and tensile load through meso-scale laboratory experiments in this work. 33 experiments have successfully been conducted for Pingdingshan sandstone. Experimental results indicated that the tensile strength increased slowly with temperatures from 25℃ to 100℃, and then sharply jumped from 100℃ to 150℃, and finally decreased slightly with temperatures from 150℃ to 300℃. And about 150℃ is the threshold temperature of strength and thermal cracking. At low temperatures （25℃-150℃）, sandstone strength is determined by relatively weak clay cement. However, at higher temperatures （150℃-300℃）, because of the strength enhancement of clay cement, sandstone strength is controlled by both mineral particles and clay cement. The effects of cement clay, micro-cracks closing, and thermal cracking were the possible reasons for our detailed analysis. In addition, the typical fracture position maps and nominal stress-strain curves indicated that the temperature had strong effects on the failure mechanism of sandstone. The fractograph implied that the dominant fracture mechanism tended to transform from brittle at low temperatures to ductile at high temperatures.展开更多
基金Project(51508575)supported by the National Natural Science Foundation of ChinaProject(2011CB013802)supported by the National Basic Research Program of China+1 种基金Projects(2014M560652,2016T90764)supported by the China Postdoctoral Science FoundationProject(2015RS4006)supported by the Innovative Talents of Science and Technology Plan of Hunan Province,China
文摘Based on the similarity theory,a tunnel excavation simulation testing system under typical unsymmetrical loading conditions was established.Using this system,the failure mechanism of surrounding rock of shallow-bias tunnels with small clear distance was analyzed along with the load characteristics.The results show that:1) The failure process of surrounding rock of shallow-bias tunnels with small clear distance consists of structural and stratum deformation induced by tunnel excavation; Microfracture surfaces are formed in the tunnel surrounding rock and extend deep into the rock mass in a larger density; Tensile cracking occurs in shallow position on the deep-buried side,with shear slip in deep rock mass.In the meantime,rapid deformation and slip take place on the shallow-buried side until the surrounding rocks totally collapse.The production and development of micro-fracture surfaces in the tunnel surrounding rock and tensile cracking in the shallow position on the deep-buried side represent the key stages of failure.2) The final failure mode is featured by an inverted conical fracture with tunnel arch as its top and the slope at tunnel entrance slope as its bottom.The range of failure on the deep-buried side is significantly larger than that on the shallow-buried side.Such difference becomes more prominent with the increasing bias angle.What distinguishes it from the "linear fracture surface" model is that the model proposed has a larger fracture angle on the two sides.Moreover,the bottom of the fracture is located at the springing line of tunnel arch.3) The total vertical load increases with bias angle.Compared with the existing methods,the unsymmetrical loading effect in measurement is more prominent.At last,countermeasures are proposed according to the analysis results: during engineering process,1) The surrounding rock mass on the deep-buried side should be reinforced apart from the tunnel surrounding rock for shallow-buried tunnels with small clear distance; moreover,the scope of consolidation should go beyond the midline of tunnel(along the direction of the top of slope) by 4 excavation spans of single tunnel.2) It is necessary to modify the load value of shallow-bias tunnels with small clear distance.
基金supported by the National Natural Science Foundation of China(Grant No.11102225)the Special Funds for Major State Basic Research Project(Grant Nos. 2010CB732002 and 2011CB201201)+2 种基金the National Excellent Doctoral Dissertation of China(Grant No.201030)the Beijing Nova Program (Grant No.2010B062)the New Century Excellent Talents in University(Grant No.NCET-09-0726)
文摘It is extremely important to study and understand the deformation behavior and strength characteristics of rocks under thermal-mechanical （TM） coupling effects. Failure behavior and strength characteristics of Pingdingshan sandstone were investigated at room temperatures up to 300℃ in an internally heated apparatus and tensile load through meso-scale laboratory experiments in this work. 33 experiments have successfully been conducted for Pingdingshan sandstone. Experimental results indicated that the tensile strength increased slowly with temperatures from 25℃ to 100℃, and then sharply jumped from 100℃ to 150℃, and finally decreased slightly with temperatures from 150℃ to 300℃. And about 150℃ is the threshold temperature of strength and thermal cracking. At low temperatures （25℃-150℃）, sandstone strength is determined by relatively weak clay cement. However, at higher temperatures （150℃-300℃）, because of the strength enhancement of clay cement, sandstone strength is controlled by both mineral particles and clay cement. The effects of cement clay, micro-cracks closing, and thermal cracking were the possible reasons for our detailed analysis. In addition, the typical fracture position maps and nominal stress-strain curves indicated that the temperature had strong effects on the failure mechanism of sandstone. The fractograph implied that the dominant fracture mechanism tended to transform from brittle at low temperatures to ductile at high temperatures.
