EP 1496079(2005—01—12)。混合20份端胺丙基的聚二甲基硅氧烷(分子量2890，粘度50mPa．s)和10份端胺丙基二甲氧基聚二甲基硅氧烷(分子量2950，粘度60mPa．s)、及3份HMDI异氰酸酯、40份THF 50℃／2h，注入PTFE模型中，除去溶剂，得到1m...EP 1496079(2005—01—12)。混合20份端胺丙基的聚二甲基硅氧烷(分子量2890，粘度50mPa．s)和10份端胺丙基二甲氧基聚二甲基硅氧烷(分子量2950，粘度60mPa．s)、及3份HMDI异氰酸酯、40份THF 50℃／2h，注入PTFE模型中，除去溶剂，得到1mm膜。展开更多
The composition and sequence distribution of monomeric units in polyester polyether multiblock copolymer were studied by pyrolysis? gas chromatography (PGC) and pyrolysis gas chromatography/mass spectrometry (PGC/M...The composition and sequence distribution of monomeric units in polyester polyether multiblock copolymer were studied by pyrolysis? gas chromatography (PGC) and pyrolysis gas chromatography/mass spectrometry (PGC/MS). PGC was applied to study the F t curve of the multiblock copolymer and PGC/MS was used to separate and identify the pyrolyzates. DTA experiment was used to study the decomposition temperature. The results show that the beginning point of elastomer’s decomposition was about 300?℃ and the decomposition temperature of most of the sample was 550?℃. Many pyrolyzates were produced because of the breaking of weak bonds in the sample. The possible microstructure was verified and the pyrolysis pathway of the copolymer was investigated.展开更多
Nylon 10 T and Nylon 10T/1010 samples were synthesized by direct melt polymerization. The non-isothermal crystallization kinetics of Nylon 10 T and Nylon 10T/1010 was investigated by means of differential scanning cal...Nylon 10 T and Nylon 10T/1010 samples were synthesized by direct melt polymerization. The non-isothermal crystallization kinetics of Nylon 10 T and Nylon 10T/1010 was investigated by means of differential scanning calorimetry(DSC). Jeziorny equation and Mo equation were applied to describe the non-isothermal crystallization kinetics of the Nylon 10 T and the Nylon 10T/1010. The activation energies for non-isothermal crystallization were obtained by Vyazovkin's method and Friedman's method, respectively. These results showed that Jeziorny equation and Mo equation well described the non-isothermal crystallization kinetics of the Nylon 10 T and the Nylon 10T/1010. It was found that the values of the activation energy for non-isothermal crystallization of the Nylon 10T/1010 were lower than those of the Nylon 10 T at a given temperature or relative crystallinity degree,which revealed that crystallization ability of the Nylon 10T/1010 was higher. The crystal morphology was observed by means of a polarized optical microscope(POM) and X-ray diffraction(XRD). It was found that the addition of sebacic acid comonomer not only did not change the crystal form of the Nylon 10 T, but also significantly increased the number and decreased the size of spherulites. Comparing with the Nylon 10 T, the crystallization rate was increased with the addition of the sebacic acid comonomer.展开更多
A tri-block copolymer coupling agent polystyreneblock-poly （n-butyl-acrylate）-block-poly （y-methacryloxypro pylt rimethoxysilane）（PS-b-PnBA-b-PMPS） was synthesized by atom transfer radical polymerization （ATRP...A tri-block copolymer coupling agent polystyreneblock-poly （n-butyl-acrylate）-block-poly （y-methacryloxypro pylt rimethoxysilane）（PS-b-PnBA-b-PMPS） was synthesized by atom transfer radical polymerization （ATRP）, and its molecular structure was characterized by fourier-transform infrared spectra, hydrogen nuclear magnetic resonance and gel permeation chromatography. The glass bead was treated with the block copolymer coupling agent, and then studied by transmission electron microscopy. The result showed that strong interaction was formed between the block copolymer coupling agent and the surface of glass bead, and then the block of poly（n-butylacrylate） formed a layer of film on the surface.展开更多
Thin films of block copolymers （BCPs） are widely accepted as potentially important materials in a host of technological applications including nano- lithography. In order to induce domain separation and form well-de...Thin films of block copolymers （BCPs） are widely accepted as potentially important materials in a host of technological applications including nano- lithography. In order to induce domain separation and form well-defined structural arrangements, many of these are solvent-annealed （i.e. solvent swollen） at moderate temperatures. The use of solvents can be challenging in industry from an environmental point of view as well as having practical/cost issues. However, a simple and environmentally friendly alternative to solvo-thermal annealing for the periodically ordered nanoscale phase separated structures is described herein. Various asymmetric polystyrene-b-poly（ethylene oxide） （PS-b-PEO） thin films were annealed in a compressible fluid, supercritical carbon dioxide （scCO2）, to control nanodomain orientation and surface morphologies. For the first time, periodic well defined, hexagonally ordered films with sub-25 nm pitch size were demonstrated using a supercritical fluid （SCF） process at low temperatures and pressures. Predominant swelling of PEO domains in scCO2 induces nanophase separation, scCO2 serves as green alternative to the conventional organic solvents for the phase segregation of BCPs with complete elimination of any residual solvent in the patterned film. The depressurization rate of scCO2 following annealing was found to affect the morphology of the films. The supercritical annealing conditions could be used to define nanoporous analogues of the microphase separated films without additional processing, providing a one-step route to membrane like structures without affecting the ordered surface phase segregated structure. An understanding of the BCP self- assembly mechanism can be realized in terms of the deviation in glass transition temperature, melting point, viscosity, interaction parameter and volume fraction of the constituent blocks in the scCO2 environment.展开更多
A complex micelle as a hemoglobin functional model with the biaoactive function of reversible oxygen transfer has been constructed through the hierarchical assembly of the diblock copolymer poly（ethylene glycol）-blo...A complex micelle as a hemoglobin functional model with the biaoactive function of reversible oxygen transfer has been constructed through the hierarchical assembly of the diblock copolymer poly（ethylene glycol）-block- poly（4-vinylpyridine-co-N-heptyl-4-vinylpyridine） （PEG-b-P（4VP-co-4VPHep））, tetrakis（4-sulfonatophenyl）porphinato iron（II） （Fe（II）TPPS） and β-cyclodextrin （β-CD）. The μ-oxo dimer of Fe（II）TPPS was successfully inhibited because the Fe（II）TPPS was included into the cavities of β-CDs through host-guest interaction. Fe（II）TPPS coordinated with pyridine groups functions as the active site to reversibly bind dioxygen. In adition, the host-guest inclusion （β-CD/Fe（II）TPPS） was encapsulated in the hydrophobic core of the complex micelle and tightly fixed by P4VP chains. The hydrophilic PEG blocks stretched in aqueous solution to constitute the shells which stabilize the structure of the complex micelle as well as endow the complex micelle with sufficient blood circulation time. Dioxygen can be bound to the Fe（II）TPPS located in the confined space and excellent reversibility of the binding-release process of dioxygen can be achieved. The quaternary amine N-heptyl-4-vinylpyridine can coerce abundant S2O4^2- ions into the core of the complex micelle to facilitate the self-reduction process. Dioxygen adducts （Fe（II）TPPS（O2）） were effectively protected by the double hydrophobic barriers constructed by the cavity of the cyclodextrin and the core of the complex micelle which enhances the ability to resist nucleophilic molecules. Therefore, the rationally designed amphiphilic structure can work as a promising artificial O2 carrier. Potentially, the complex micelle can be expected to improve the treatment of diseases linked with hypoxia.展开更多
文摘The composition and sequence distribution of monomeric units in polyester polyether multiblock copolymer were studied by pyrolysis? gas chromatography (PGC) and pyrolysis gas chromatography/mass spectrometry (PGC/MS). PGC was applied to study the F t curve of the multiblock copolymer and PGC/MS was used to separate and identify the pyrolyzates. DTA experiment was used to study the decomposition temperature. The results show that the beginning point of elastomer’s decomposition was about 300?℃ and the decomposition temperature of most of the sample was 550?℃. Many pyrolyzates were produced because of the breaking of weak bonds in the sample. The possible microstructure was verified and the pyrolysis pathway of the copolymer was investigated.
基金Supported by the National Science and Technology Support Program of China(No.2013BAE02B01)the Special Project on the Integration of Industry,Education and Research of Guangdong Province(No.2013B090500003)the Commissioner Workstation Project of Guangdong Province(No.2014A090906002)
文摘Nylon 10 T and Nylon 10T/1010 samples were synthesized by direct melt polymerization. The non-isothermal crystallization kinetics of Nylon 10 T and Nylon 10T/1010 was investigated by means of differential scanning calorimetry(DSC). Jeziorny equation and Mo equation were applied to describe the non-isothermal crystallization kinetics of the Nylon 10 T and the Nylon 10T/1010. The activation energies for non-isothermal crystallization were obtained by Vyazovkin's method and Friedman's method, respectively. These results showed that Jeziorny equation and Mo equation well described the non-isothermal crystallization kinetics of the Nylon 10 T and the Nylon 10T/1010. It was found that the values of the activation energy for non-isothermal crystallization of the Nylon 10T/1010 were lower than those of the Nylon 10 T at a given temperature or relative crystallinity degree,which revealed that crystallization ability of the Nylon 10T/1010 was higher. The crystal morphology was observed by means of a polarized optical microscope(POM) and X-ray diffraction(XRD). It was found that the addition of sebacic acid comonomer not only did not change the crystal form of the Nylon 10 T, but also significantly increased the number and decreased the size of spherulites. Comparing with the Nylon 10 T, the crystallization rate was increased with the addition of the sebacic acid comonomer.
文摘A tri-block copolymer coupling agent polystyreneblock-poly （n-butyl-acrylate）-block-poly （y-methacryloxypro pylt rimethoxysilane）（PS-b-PnBA-b-PMPS） was synthesized by atom transfer radical polymerization （ATRP）, and its molecular structure was characterized by fourier-transform infrared spectra, hydrogen nuclear magnetic resonance and gel permeation chromatography. The glass bead was treated with the block copolymer coupling agent, and then studied by transmission electron microscopy. The result showed that strong interaction was formed between the block copolymer coupling agent and the surface of glass bead, and then the block of poly（n-butylacrylate） formed a layer of film on the surface.
文摘Thin films of block copolymers （BCPs） are widely accepted as potentially important materials in a host of technological applications including nano- lithography. In order to induce domain separation and form well-defined structural arrangements, many of these are solvent-annealed （i.e. solvent swollen） at moderate temperatures. The use of solvents can be challenging in industry from an environmental point of view as well as having practical/cost issues. However, a simple and environmentally friendly alternative to solvo-thermal annealing for the periodically ordered nanoscale phase separated structures is described herein. Various asymmetric polystyrene-b-poly（ethylene oxide） （PS-b-PEO） thin films were annealed in a compressible fluid, supercritical carbon dioxide （scCO2）, to control nanodomain orientation and surface morphologies. For the first time, periodic well defined, hexagonally ordered films with sub-25 nm pitch size were demonstrated using a supercritical fluid （SCF） process at low temperatures and pressures. Predominant swelling of PEO domains in scCO2 induces nanophase separation, scCO2 serves as green alternative to the conventional organic solvents for the phase segregation of BCPs with complete elimination of any residual solvent in the patterned film. The depressurization rate of scCO2 following annealing was found to affect the morphology of the films. The supercritical annealing conditions could be used to define nanoporous analogues of the microphase separated films without additional processing, providing a one-step route to membrane like structures without affecting the ordered surface phase segregated structure. An understanding of the BCP self- assembly mechanism can be realized in terms of the deviation in glass transition temperature, melting point, viscosity, interaction parameter and volume fraction of the constituent blocks in the scCO2 environment.
文摘A complex micelle as a hemoglobin functional model with the biaoactive function of reversible oxygen transfer has been constructed through the hierarchical assembly of the diblock copolymer poly（ethylene glycol）-block- poly（4-vinylpyridine-co-N-heptyl-4-vinylpyridine） （PEG-b-P（4VP-co-4VPHep））, tetrakis（4-sulfonatophenyl）porphinato iron（II） （Fe（II）TPPS） and β-cyclodextrin （β-CD）. The μ-oxo dimer of Fe（II）TPPS was successfully inhibited because the Fe（II）TPPS was included into the cavities of β-CDs through host-guest interaction. Fe（II）TPPS coordinated with pyridine groups functions as the active site to reversibly bind dioxygen. In adition, the host-guest inclusion （β-CD/Fe（II）TPPS） was encapsulated in the hydrophobic core of the complex micelle and tightly fixed by P4VP chains. The hydrophilic PEG blocks stretched in aqueous solution to constitute the shells which stabilize the structure of the complex micelle as well as endow the complex micelle with sufficient blood circulation time. Dioxygen can be bound to the Fe（II）TPPS located in the confined space and excellent reversibility of the binding-release process of dioxygen can be achieved. The quaternary amine N-heptyl-4-vinylpyridine can coerce abundant S2O4^2- ions into the core of the complex micelle to facilitate the self-reduction process. Dioxygen adducts （Fe（II）TPPS（O2）） were effectively protected by the double hydrophobic barriers constructed by the cavity of the cyclodextrin and the core of the complex micelle which enhances the ability to resist nucleophilic molecules. Therefore, the rationally designed amphiphilic structure can work as a promising artificial O2 carrier. Potentially, the complex micelle can be expected to improve the treatment of diseases linked with hypoxia.
