In this paper, using focal mechanism solutions of moderate-strong earthquakes in Yunnan and its adjacent areas, and based on the statistical analysis of the parameters of focal mechanism solutions, we discussed in det...In this paper, using focal mechanism solutions of moderate-strong earthquakes in Yunnan and its adjacent areas, and based on the statistical analysis of the parameters of focal mechanism solutions, we discussed in detail the earthquake fault types and the characteristics of the modern tectonic stress field in the Yunnan region. The results show that most moderate-strong earthquakes occurring in the Yunnan region are of the strike-slip type, amounting to 80% of the total. Normal faulting and normal with strike-slip and reverse and reverse with strike-slip earthquakes is almost equivalent in proportion, about 8% each. The tectonic stress field of the Yunnan region is near-horizontal, and the dips of earthquake fault planes are large. There are three main dynamic sources acting on the Yunnan region: one is the NE, NNE and NNW-directed acting force from Myanmar, Laos and Vietnam; the second is the SE-SSE directed force from the Sichuan and Sichuan-Yunnan rhombus block and the third is the NW-NNW directed force from the South China block. These three acting forces have controlled the faulting behavior of the main faults and the characteristics of strong earthquake activity of Yunnan and its adjacent regions.展开更多
Based on the existing materials of fault segmentation,characteristic earthquakes,and their empirical relationships,we calculated the parameters of the fault segments,such as length,width,magnitudes of characteristic e...Based on the existing materials of fault segmentation,characteristic earthquakes,and their empirical relationships,we calculated the parameters of the fault segments,such as length,width,magnitudes of characteristic earthquakes,etc.Constrained by GPS velocity field,the slip rates of these fault segments in depth were inversed using the 3-D half-space elastic dislocation model.As not all of the recurrence periods and co-seismic displacements of characteristic earthquakes are known,we selected the fault segments with these two parameters known and calculated the accumulation rate of average co-seismic displacement,which shows the faults' slip rate in seismogenic layer.Then,the slip rate in depth was compared with that in seismogenic layer,the relationship between them was obtained,and this relationship was used to get the recurrence periods and co-seismic displacements of all fault segments.After the studies above,we calculated the co-seismic deformation field of all the earthquakes larger than M s 6.8 from AD 1700 one by one and inversed the potential displacement in the co-seismic deformation field.Then,we divided the potential displacement by the slip rate from GPS inversion to get the influences of these fault segments,added the influences into the elapsed time of the characteristic earthquakes,and obtained the earthquake hazard degree of all the segments we studied in the form of the ratio of elapsed time to recurrence period;so,we name the ratio as the Impending Earthquake Risk (IER).Historical earthquake cases show that the fault segment is in safety when the IER is less than 1 but in danger after the IER becomes larger than 1.In 2009,the IER is larger than 1 on the following segments,1.35 on the Tagong segment of Xianshuihe fault,1 on the Menggu-Dongchuan segment,1.04 on the Dongchuan-Xundian segment,and 1.09 on the Yiliang-Chengjiang segment of Xiaojiang fault.展开更多
To investigate the relationship between velocity structure and earthquake activity on the southeastern front of the Tibetan Plat- eau, we make use of continuous observations of seismic ambient noise data obtained at 5...To investigate the relationship between velocity structure and earthquake activity on the southeastern front of the Tibetan Plat- eau, we make use of continuous observations of seismic ambient noise data obtained at 55 broadband stations from the regional Yunnan Seismic Network. These data are used to compute Rayleigh wave Green＇s Functions by cross-correlating between two stations, extracting phase velocity dispersion curves, and finally inverting to image Rayleigh wave phase velocity with periods between 5 and 34 s by ambient noise tomography. The results tie structures in the studied region. Phase velocity anomalies show significant lateral variations in crustal and uppermost man- at short periods （5-12 s） are closely related to regional tectonic features such as sediment thickness and the depth of the crystalline basement. The Sichuan-Yunnan rhombic block, enclosed by the Honghe, Xiaojiang and Jianchuan faults, emerges as a large range of low-velocity anomalies at periods of 16-26 s, that in- verts to high-velocity anomalies at periods of 30-34 s. The phase velocity variation in the vicinity of the Sichuan-Yunnan rhombic block suggests that the low-velocity anomaly area in the middle-lower crust may correspond to lower crustal channel- ized flow of the Tibetan Plateau. The spatial distribution of strong earthquakes since 1970 reveals that the Yunnan region is inhomogeneous and shows prominent characteristics of block motion. However, earthquakes mostly occur in the upper crust, with the exception of the middle-Yunnan block where earthquakes occur at the interface zone between high and low velocity as well as in the low-velocity zones, with magnitudes being generally less than 7. There are few earthquakes of magnitude 5 at the depths of 15-30 km, where gather earthquakes of magnitude 7 or higher ones which mainly occur in the interface zone between high and low velocities with others extending to the high-velocity abnormal zone.展开更多
基金sponsored by the important projects of Yunnan Province,entitled"The regularity of strong earthquake activities and the plate margindynamic mechanism on the eastern margin of the Qinghai-Tibet plateau"(2010CC006)"Study on relationship between evolutionary dynamics of geophysical and geochemistry field and strong seismic activity in Yunnan"(JCYB200806015)
文摘In this paper, using focal mechanism solutions of moderate-strong earthquakes in Yunnan and its adjacent areas, and based on the statistical analysis of the parameters of focal mechanism solutions, we discussed in detail the earthquake fault types and the characteristics of the modern tectonic stress field in the Yunnan region. The results show that most moderate-strong earthquakes occurring in the Yunnan region are of the strike-slip type, amounting to 80% of the total. Normal faulting and normal with strike-slip and reverse and reverse with strike-slip earthquakes is almost equivalent in proportion, about 8% each. The tectonic stress field of the Yunnan region is near-horizontal, and the dips of earthquake fault planes are large. There are three main dynamic sources acting on the Yunnan region: one is the NE, NNE and NNW-directed acting force from Myanmar, Laos and Vietnam; the second is the SE-SSE directed force from the Sichuan and Sichuan-Yunnan rhombus block and the third is the NW-NNW directed force from the South China block. These three acting forces have controlled the faulting behavior of the main faults and the characteristics of strong earthquake activity of Yunnan and its adjacent regions.
基金supported by the National Basic Research Program of China (Grant No. 2008CB425704)the Open Foundation of State Key Laboratory of Earthquake Dynamics (Grant No. LED2009B02)
文摘Based on the existing materials of fault segmentation,characteristic earthquakes,and their empirical relationships,we calculated the parameters of the fault segments,such as length,width,magnitudes of characteristic earthquakes,etc.Constrained by GPS velocity field,the slip rates of these fault segments in depth were inversed using the 3-D half-space elastic dislocation model.As not all of the recurrence periods and co-seismic displacements of characteristic earthquakes are known,we selected the fault segments with these two parameters known and calculated the accumulation rate of average co-seismic displacement,which shows the faults' slip rate in seismogenic layer.Then,the slip rate in depth was compared with that in seismogenic layer,the relationship between them was obtained,and this relationship was used to get the recurrence periods and co-seismic displacements of all fault segments.After the studies above,we calculated the co-seismic deformation field of all the earthquakes larger than M s 6.8 from AD 1700 one by one and inversed the potential displacement in the co-seismic deformation field.Then,we divided the potential displacement by the slip rate from GPS inversion to get the influences of these fault segments,added the influences into the elapsed time of the characteristic earthquakes,and obtained the earthquake hazard degree of all the segments we studied in the form of the ratio of elapsed time to recurrence period;so,we name the ratio as the Impending Earthquake Risk (IER).Historical earthquake cases show that the fault segment is in safety when the IER is less than 1 but in danger after the IER becomes larger than 1.In 2009,the IER is larger than 1 on the following segments,1.35 on the Tagong segment of Xianshuihe fault,1 on the Menggu-Dongchuan segment,1.04 on the Dongchuan-Xundian segment,and 1.09 on the Yiliang-Chengjiang segment of Xiaojiang fault.
基金supported by National Natural Science Foundation of China(Grant No.41174042)China National Special Fund for Earthquake Scientific Research in Public Interest(Grant No.201008001)
文摘To investigate the relationship between velocity structure and earthquake activity on the southeastern front of the Tibetan Plat- eau, we make use of continuous observations of seismic ambient noise data obtained at 55 broadband stations from the regional Yunnan Seismic Network. These data are used to compute Rayleigh wave Green＇s Functions by cross-correlating between two stations, extracting phase velocity dispersion curves, and finally inverting to image Rayleigh wave phase velocity with periods between 5 and 34 s by ambient noise tomography. The results tie structures in the studied region. Phase velocity anomalies show significant lateral variations in crustal and uppermost man- at short periods （5-12 s） are closely related to regional tectonic features such as sediment thickness and the depth of the crystalline basement. The Sichuan-Yunnan rhombic block, enclosed by the Honghe, Xiaojiang and Jianchuan faults, emerges as a large range of low-velocity anomalies at periods of 16-26 s, that in- verts to high-velocity anomalies at periods of 30-34 s. The phase velocity variation in the vicinity of the Sichuan-Yunnan rhombic block suggests that the low-velocity anomaly area in the middle-lower crust may correspond to lower crustal channel- ized flow of the Tibetan Plateau. The spatial distribution of strong earthquakes since 1970 reveals that the Yunnan region is inhomogeneous and shows prominent characteristics of block motion. However, earthquakes mostly occur in the upper crust, with the exception of the middle-Yunnan block where earthquakes occur at the interface zone between high and low velocity as well as in the low-velocity zones, with magnitudes being generally less than 7. There are few earthquakes of magnitude 5 at the depths of 15-30 km, where gather earthquakes of magnitude 7 or higher ones which mainly occur in the interface zone between high and low velocities with others extending to the high-velocity abnormal zone.
