Acetic anhydride is the important organic chemical raw material, and is used widely in chemical industry,pharmaceutical industry, dyes, spices and other fields. In this paper, the process of carbonylation of methyl ac...Acetic anhydride is the important organic chemical raw material, and is used widely in chemical industry,pharmaceutical industry, dyes, spices and other fields. In this paper, the process of carbonylation of methyl acetate in rhodium iodine catalyst system was studied, and the suitable reaction conditions were determined.At the same time, the kinetic model was established. The optimum reaction conditions were as follows： the reaction pressure was 5 MPa, the hydrogen content was 8%, the amount of iodomethane was 15%, the amount of lithium iodide was 3%, the reaction temperature was 150 ℃ and the reaction time is 3 h. Under the above reaction conditions, the selectivity of the reaction is close to 100% and the conversion is as high as 92%. The macroscopic kinetic model of the reaction was established in the temperature range of 120 ℃–150 ℃. The reaction is an irreversible reaction without the formation of by-products and the dynamic equation is also given in the Conclusions section.展开更多
Far from being equivalent to host the process, the vessels play an active role in the crystallization thanks to their differently shaped bottoms. It was clearly pointed out through a meticulous experimental research o...Far from being equivalent to host the process, the vessels play an active role in the crystallization thanks to their differently shaped bottoms. It was clearly pointed out through a meticulous experimental research on the batch crystallization of CAM （citric acid monohydrate） carried out in the years 1997-1998 by the author at the historic laboratories of＂La Sapienza＂ University of Rome. Such pioneering M.Sc. thesis, supervised by Prof. Barbara Mazzarotta （Department of Chemical Engineering）, was already summarized in an informative essay but, since the crystallization operating conditions to optimize were illustrated ＂collectively＂, it seemed necessary a further paper expounding uniquely the geometry effect. Our aim is to use all the data, collected and simulated, in order to show why the round-bottomed crystallizer performed better than the conical-bottomed one with the CAM from aqueous solutions, and why we should discard the flat-bottomed crystallizers.展开更多
The adsorption isotherms of mixtures of linear alkanes, involving n-pentane, n-hexane, and n-heptane in pillared layered materials (PLMs) with three different porosities Ψ=0.98, 0.94 and 0.87, and three pore widths H...The adsorption isotherms of mixtures of linear alkanes, involving n-pentane, n-hexane, and n-heptane in pillared layered materials (PLMs) with three different porosities Ψ=0.98, 0.94 and 0.87, and three pore widths H=1.02, 1.70 and 2.38 nm at temperature T=300 K were simulated by using configurational-bias Monte Carlo (CBMC) techniques in grand canonical ensemble.A grid model was employed to calculate the interaction between a fluid molecule and two layered boards here. For alkane mixtures,the n-heptane, the longest chain component in alkane mixtures, is preferentially adsorbed at low pressures, with its adsorption increasing and then decreasing as the pressure increases continuously while the n-pentane, the shortest chain component in alkane mixtures, is still adsorbed at high pressures; the adsorption of the longest chain component of alkane mixtures increases as the pore width and the porosity of PLMs increase.展开更多
Abstract： This paper presents a model for optimizing industrial production of blend for livestock feed by application of a fuzzy multi-criteria programming method. This paper （1） considers multicriteria problem of ...Abstract： This paper presents a model for optimizing industrial production of blend for livestock feed by application of a fuzzy multi-criteria programming method. This paper （1） considers multicriteria problem of industrial production of feed blend optimization in vague conditions, （2） proposes a fuzzy multiple criteria programming （FMCP） model for industrial production of feed blend optimization in vague conditions, （3） applies the proposed model in solving the concrete problem of industrial production of feed blend optimization and （4） points to the advantages of the model usage through sensitivity analysis of compromise solutions.展开更多
文摘Acetic anhydride is the important organic chemical raw material, and is used widely in chemical industry,pharmaceutical industry, dyes, spices and other fields. In this paper, the process of carbonylation of methyl acetate in rhodium iodine catalyst system was studied, and the suitable reaction conditions were determined.At the same time, the kinetic model was established. The optimum reaction conditions were as follows： the reaction pressure was 5 MPa, the hydrogen content was 8%, the amount of iodomethane was 15%, the amount of lithium iodide was 3%, the reaction temperature was 150 ℃ and the reaction time is 3 h. Under the above reaction conditions, the selectivity of the reaction is close to 100% and the conversion is as high as 92%. The macroscopic kinetic model of the reaction was established in the temperature range of 120 ℃–150 ℃. The reaction is an irreversible reaction without the formation of by-products and the dynamic equation is also given in the Conclusions section.
文摘Far from being equivalent to host the process, the vessels play an active role in the crystallization thanks to their differently shaped bottoms. It was clearly pointed out through a meticulous experimental research on the batch crystallization of CAM （citric acid monohydrate） carried out in the years 1997-1998 by the author at the historic laboratories of＂La Sapienza＂ University of Rome. Such pioneering M.Sc. thesis, supervised by Prof. Barbara Mazzarotta （Department of Chemical Engineering）, was already summarized in an informative essay but, since the crystallization operating conditions to optimize were illustrated ＂collectively＂, it seemed necessary a further paper expounding uniquely the geometry effect. Our aim is to use all the data, collected and simulated, in order to show why the round-bottomed crystallizer performed better than the conical-bottomed one with the CAM from aqueous solutions, and why we should discard the flat-bottomed crystallizers.
基金Project (No. X502034) supported by Research Institute PetroleumProcessing of China
文摘The adsorption isotherms of mixtures of linear alkanes, involving n-pentane, n-hexane, and n-heptane in pillared layered materials (PLMs) with three different porosities Ψ=0.98, 0.94 and 0.87, and three pore widths H=1.02, 1.70 and 2.38 nm at temperature T=300 K were simulated by using configurational-bias Monte Carlo (CBMC) techniques in grand canonical ensemble.A grid model was employed to calculate the interaction between a fluid molecule and two layered boards here. For alkane mixtures,the n-heptane, the longest chain component in alkane mixtures, is preferentially adsorbed at low pressures, with its adsorption increasing and then decreasing as the pressure increases continuously while the n-pentane, the shortest chain component in alkane mixtures, is still adsorbed at high pressures; the adsorption of the longest chain component of alkane mixtures increases as the pore width and the porosity of PLMs increase.
文摘Abstract： This paper presents a model for optimizing industrial production of blend for livestock feed by application of a fuzzy multi-criteria programming method. This paper （1） considers multicriteria problem of industrial production of feed blend optimization in vague conditions, （2） proposes a fuzzy multiple criteria programming （FMCP） model for industrial production of feed blend optimization in vague conditions, （3） applies the proposed model in solving the concrete problem of industrial production of feed blend optimization and （4） points to the advantages of the model usage through sensitivity analysis of compromise solutions.
