Method for decolrizing dyed wastewater was researched and the affecting factors dicussed. The result shows that the conditions for getting an optimum decolorization effect are: a reaction time of 60 min, a coke size o...Method for decolrizing dyed wastewater was researched and the affecting factors dicussed. The result shows that the conditions for getting an optimum decolorization effect are: a reaction time of 60 min, a coke size of 5～10 mm, a solid/liquid ratio of 1∶10, an air blast volume of 4 m3/h, and proper Fe/coke ratio determined by the type of dye material. The system acidity influences dyed wastewater in different ways, i.e., acid condition is good for the decolorization of scarlet 3R and methyl orange simulated wastewater but bad for that of alkali violet 5BN simulated wastewater, while the decolorization of dispersed yellow E-RGFL simulated wastewater has nothing to do with pH.展开更多
The objective of this research was to investigate the optimum condition for treatment of textile industrial wastewater from water jet loom machine by chemical coagulation and electrocoagulation methods. The variables ...The objective of this research was to investigate the optimum condition for treatment of textile industrial wastewater from water jet loom machine by chemical coagulation and electrocoagulation methods. The variables of chemical coagulation method were type and amount of chemicals, pH and stirring rate. For electrocoagulation method, the variables were electrode materials, electric potential and contact time. It was found that the optimum condition of chemical coagulation method was 10% （w/w） of aqueous solution of aluminum sulphate 80 mL and 0.01% （w/w） of aqueous solution of coagulant aids, cationic polymer 32 mL per 4 L of wastewater at oH 8. The mixture solution was rapidly stirred with 120 rpm for 1 min and then slowly stirred with 20 rpm for 20 rain. The removal efficiency of turbidity, COD and oil content were 88.88%, 85.20% and 77.72%, respectively. For electrocoagulation method, the optimum condition was using aluminum electrode with 35 V and 150 min of contact time. The removal efficiency of turbidity, COD and oil content were 98.86%, 91.63% and 89.84%, respectively. It can be concluded from this study that the textile industrial wastewater treatment from water jet loom machine with electrocoagulation method is more efficient than that with chemical coagulation method.展开更多
文摘Method for decolrizing dyed wastewater was researched and the affecting factors dicussed. The result shows that the conditions for getting an optimum decolorization effect are: a reaction time of 60 min, a coke size of 5～10 mm, a solid/liquid ratio of 1∶10, an air blast volume of 4 m3/h, and proper Fe/coke ratio determined by the type of dye material. The system acidity influences dyed wastewater in different ways, i.e., acid condition is good for the decolorization of scarlet 3R and methyl orange simulated wastewater but bad for that of alkali violet 5BN simulated wastewater, while the decolorization of dispersed yellow E-RGFL simulated wastewater has nothing to do with pH.
文摘The objective of this research was to investigate the optimum condition for treatment of textile industrial wastewater from water jet loom machine by chemical coagulation and electrocoagulation methods. The variables of chemical coagulation method were type and amount of chemicals, pH and stirring rate. For electrocoagulation method, the variables were electrode materials, electric potential and contact time. It was found that the optimum condition of chemical coagulation method was 10% （w/w） of aqueous solution of aluminum sulphate 80 mL and 0.01% （w/w） of aqueous solution of coagulant aids, cationic polymer 32 mL per 4 L of wastewater at oH 8. The mixture solution was rapidly stirred with 120 rpm for 1 min and then slowly stirred with 20 rpm for 20 rain. The removal efficiency of turbidity, COD and oil content were 88.88%, 85.20% and 77.72%, respectively. For electrocoagulation method, the optimum condition was using aluminum electrode with 35 V and 150 min of contact time. The removal efficiency of turbidity, COD and oil content were 98.86%, 91.63% and 89.84%, respectively. It can be concluded from this study that the textile industrial wastewater treatment from water jet loom machine with electrocoagulation method is more efficient than that with chemical coagulation method.
