Mixed-weight least-squares (MWLS) predictive control algorithm, compared with quadratic programming (QP) method, has the advantages of reducing the computer burden, quick calculation speed and dealing with the case in...Mixed-weight least-squares (MWLS) predictive control algorithm, compared with quadratic programming (QP) method, has the advantages of reducing the computer burden, quick calculation speed and dealing with the case in which the optimization is infeasible. But it can only deal with soft constraints. In order to deal with hard constraints and guarantee feasibility, an improved algorithm is proposed by recalculating the setpoint according to the hard constraints before calculating the manipulated variable and MWLS algorithm is used to satisfy the requirement of soft constraints for the system with the input constraints and output constraints. The algorithm can not only guarantee stability of the system and zero steady state error, but also satisfy the hard constraints of input and output variables. The simulation results show the improved algorithm is feasible and effective.展开更多
Using the services provided by virtual enterprises, we presented a solution to implement flexible inter-enterprise workflow management. Services were the responses of events that can be accessed programmatically on th...Using the services provided by virtual enterprises, we presented a solution to implement flexible inter-enterprise workflow management. Services were the responses of events that can be accessed programmatically on the Internet by HTTP protocol. Services were obtained according to some standardized service templates. The workflow engine's flexible control to a request was bound to appropriate services and their providers by using a constraint-based, dynamic binding mechanism. Hence, a flexible and collaborative business was achieved. The workflow management system supports virtual enterprise, and the styles of virtual enterprises can be adjusted readily to adapt various situations.展开更多
With the continuous improvement of industrial automation in our country and the use of high technology, promoted the scientific content of traditional industry. The development of electric automation control system in...With the continuous improvement of industrial automation in our country and the use of high technology, promoted the scientific content of traditional industry. The development of electric automation control system inevitably turn towards a systematic, comprehensive development direction. This article first analyze the present problems in electrical automation monitoring system, analyzes its future development trends, so as to provide some reference for the effective application of electrical automation in the future monitoring system, fundamentally realize the resources sharing.展开更多
Manufacturing system, with high level of complexity and with a mix of semi-repetitive and repetitive products, to become productive, should seek the standardization of products and processes to obtain the optimization...Manufacturing system, with high level of complexity and with a mix of semi-repetitive and repetitive products, to become productive, should seek the standardization of products and processes to obtain the optimization of use of production resources. However, it is necessary to measure the productivity, so that the system of measurement and control of manufacturing processes are an element critical as to ensure greater visibility of the flow＇s restrictions, minimized when detected properly. In this case, the automation of factory＇s measurement process can effectively contribute to ensuring the effectiveness of the function control of a manufacturing system. It is important to consider that the automation of the system of measurement and control of manufacturing processes, of complex environment, is heavily dependent of IT tools applied directly in the interface computational between the operation systems and the corporate systems. This heavy reliance, if exploited technically properly, allows that automation of the system of measurement and control of production makes the access to time real of availability of manufacturing process＇s data, such as processing time and setup time that it can export to a specialist software in programming production, for example, feasible. In this paper, the automation of the system of measurement and control of production is approached, in order to identify the main possibilities of the design of an information system capable to integrate the flow of information in an environment internal on manufacturing organizations, with emphasis in the digital manufacturing paradigm.展开更多
基金National Key Basic Research and Development(No.2002CB312200)
文摘Mixed-weight least-squares (MWLS) predictive control algorithm, compared with quadratic programming (QP) method, has the advantages of reducing the computer burden, quick calculation speed and dealing with the case in which the optimization is infeasible. But it can only deal with soft constraints. In order to deal with hard constraints and guarantee feasibility, an improved algorithm is proposed by recalculating the setpoint according to the hard constraints before calculating the manipulated variable and MWLS algorithm is used to satisfy the requirement of soft constraints for the system with the input constraints and output constraints. The algorithm can not only guarantee stability of the system and zero steady state error, but also satisfy the hard constraints of input and output variables. The simulation results show the improved algorithm is feasible and effective.
文摘Using the services provided by virtual enterprises, we presented a solution to implement flexible inter-enterprise workflow management. Services were the responses of events that can be accessed programmatically on the Internet by HTTP protocol. Services were obtained according to some standardized service templates. The workflow engine's flexible control to a request was bound to appropriate services and their providers by using a constraint-based, dynamic binding mechanism. Hence, a flexible and collaborative business was achieved. The workflow management system supports virtual enterprise, and the styles of virtual enterprises can be adjusted readily to adapt various situations.
文摘With the continuous improvement of industrial automation in our country and the use of high technology, promoted the scientific content of traditional industry. The development of electric automation control system inevitably turn towards a systematic, comprehensive development direction. This article first analyze the present problems in electrical automation monitoring system, analyzes its future development trends, so as to provide some reference for the effective application of electrical automation in the future monitoring system, fundamentally realize the resources sharing.
文摘Manufacturing system, with high level of complexity and with a mix of semi-repetitive and repetitive products, to become productive, should seek the standardization of products and processes to obtain the optimization of use of production resources. However, it is necessary to measure the productivity, so that the system of measurement and control of manufacturing processes are an element critical as to ensure greater visibility of the flow＇s restrictions, minimized when detected properly. In this case, the automation of factory＇s measurement process can effectively contribute to ensuring the effectiveness of the function control of a manufacturing system. It is important to consider that the automation of the system of measurement and control of manufacturing processes, of complex environment, is heavily dependent of IT tools applied directly in the interface computational between the operation systems and the corporate systems. This heavy reliance, if exploited technically properly, allows that automation of the system of measurement and control of production makes the access to time real of availability of manufacturing process＇s data, such as processing time and setup time that it can export to a specialist software in programming production, for example, feasible. In this paper, the automation of the system of measurement and control of production is approached, in order to identify the main possibilities of the design of an information system capable to integrate the flow of information in an environment internal on manufacturing organizations, with emphasis in the digital manufacturing paradigm.
