Xiamen Bay in South China has experienced extensive coastal exploitation since the 1950s,resulting in some severe environmental problems.Local authorities now have completed or are implementing many environmental rest...Xiamen Bay in South China has experienced extensive coastal exploitation since the 1950s,resulting in some severe environmental problems.Local authorities now have completed or are implementing many environmental restoration projects.Evaluating the cumulative impact of exploitation and restoration activities on the environment is a complicated multi-disciplinary problem.However,hydrodynamic changes in the bay caused by such coastal projects can be characterized directly and definitively through numerical modeling.This paper assesses the cumulative effect of coastal projects on the hydrodynamic setting using a high-resolution numerical modeling method that makes use of tidal current speeds and the tidal prism as two hydrodynamic indices.Changes in tidal velocity and the characteristics of the tidal prism show that hydrodynamic conditions have declined from 1938 to 2007 in the full-tide area.The tidal current speed and tidal prism have decreased by 40% in the western part of the bay and 20% in the eastern part of the bay.Because of the linear relationship between tidal prism and area,the degraded hydrodynamic conditions are anticipated to be restored to 1972 levels following the completion of current and proposed restoration projects,i.e.33% and 15% decrease in the hydrodynamic conditions of 1938 for the western and eastern parts of the bay,respectively.The results indicate that hydrodynamic conditions can be restored to some extent with the implementation of a sustainable coastal development plan,although a full reversal of conditions is not possible.To fully assess the environmental changes in a region,more indices,e.g.,water quality and ecosystem parameters,should be considered in future evaluations.展开更多
Experimental study is performed to design and develop a cylindrical micro-pump driven by expansion and contraction of the heat deformation material, whose variation is caused with the aid of heating and cooling proper...Experimental study is performed to design and develop a cylindrical micro-pump driven by expansion and contraction of the heat deformation material, whose variation is caused with the aid of heating and cooling properties of Peltier devices. The pump consists of the diffuser valve unit, the heat deformation material unit, the nozzle valve unit, the Peltier devices and the cover. The input current of the Peltier devices is controlled by the bipolar power supply so that the Peltier devices are heated and cooled periodically. The working fluid flow in the micro-pump is caused by the periodical thermal deformation of material which is caused by the periodical heating and cooling of the Peltier devices. In order to measure the fluid flow in the micro-pump, micro air bubbles are employed as a tracer. The corresponding movement is recorded by X-ray apparatus and its velocity is measured by PIV （particle image velocimetry）. It is found that, the micro-pump developed here can make the working fluid flow. The corresponding fluid flow in the micro pump is confirmed by the numerical method.展开更多
DAR （diffusion absorption refrigeration） cycle is driven by heat and has no moving parts. It is based on refrigerant and absorbent as the working fluid together with hydrogen as an auxiliary inert gas. To circulate ...DAR （diffusion absorption refrigeration） cycle is driven by heat and has no moving parts. It is based on refrigerant and absorbent as the working fluid together with hydrogen as an auxiliary inert gas. To circulate the working fluid without a mechanical pump, the diffusion absorption cycle relies on a bubble pump. Experimental system was designed and operated. Its aim was to investigate the performance of a bubble pump operating with three lifting tubes. The experimental results of the system were compared to existing models. The comparison showed that there was a bad agreement between the experimental and the theoretical results.展开更多
Nowadays Computational Fluid Dynamics （CFD） software is adopted as a design and analysis tool in a great number of engineering fields. We can say that single-physics CFD has been suffciently matured in the practical...Nowadays Computational Fluid Dynamics （CFD） software is adopted as a design and analysis tool in a great number of engineering fields. We can say that single-physics CFD has been suffciently matured in the practical point of view. The main target of existing CFD software is single-phase flows such as water and air. However, many multi-physics problems exist in engineering. Most of them consist of flow and other physics, and the interactions between different physics are very important. Obviously, multi-physics phenomena are critical in devel- oping machines and processes. A multi-physics phenomenon seems to be very complex, and it is so difficult to be predicted by adding other physics to flow phenomenon. Therefore, multi-physics CFD techniques are still under research and development. This would be caused from the facts that processing speed of current computers is not fast enough for conducting a multi-physics simulation, and furthermore physical models except for flow physics have not been suitably established. Therefore, in near future, we have to develop various physical models and ef- ficient CFD techniques, in order to success multi-physics simulations in engineering. In the present paper, I will describe the present states of multi-physics CFD simulations, and then show some numerical results such as ice accretion and electro-chemical machining process of a three-dimensional compressor blade which were obtained in my laboratory. Multi-physics CFD simulations would be a key technology in near future.展开更多
基金Supported by the National Natural Science Foundation of China(Nos.41076001,40810069004)the Fundamental Research Funds for the Central Universities(No.2010121029)
文摘Xiamen Bay in South China has experienced extensive coastal exploitation since the 1950s,resulting in some severe environmental problems.Local authorities now have completed or are implementing many environmental restoration projects.Evaluating the cumulative impact of exploitation and restoration activities on the environment is a complicated multi-disciplinary problem.However,hydrodynamic changes in the bay caused by such coastal projects can be characterized directly and definitively through numerical modeling.This paper assesses the cumulative effect of coastal projects on the hydrodynamic setting using a high-resolution numerical modeling method that makes use of tidal current speeds and the tidal prism as two hydrodynamic indices.Changes in tidal velocity and the characteristics of the tidal prism show that hydrodynamic conditions have declined from 1938 to 2007 in the full-tide area.The tidal current speed and tidal prism have decreased by 40% in the western part of the bay and 20% in the eastern part of the bay.Because of the linear relationship between tidal prism and area,the degraded hydrodynamic conditions are anticipated to be restored to 1972 levels following the completion of current and proposed restoration projects,i.e.33% and 15% decrease in the hydrodynamic conditions of 1938 for the western and eastern parts of the bay,respectively.The results indicate that hydrodynamic conditions can be restored to some extent with the implementation of a sustainable coastal development plan,although a full reversal of conditions is not possible.To fully assess the environmental changes in a region,more indices,e.g.,water quality and ecosystem parameters,should be considered in future evaluations.
文摘Experimental study is performed to design and develop a cylindrical micro-pump driven by expansion and contraction of the heat deformation material, whose variation is caused with the aid of heating and cooling properties of Peltier devices. The pump consists of the diffuser valve unit, the heat deformation material unit, the nozzle valve unit, the Peltier devices and the cover. The input current of the Peltier devices is controlled by the bipolar power supply so that the Peltier devices are heated and cooled periodically. The working fluid flow in the micro-pump is caused by the periodical thermal deformation of material which is caused by the periodical heating and cooling of the Peltier devices. In order to measure the fluid flow in the micro-pump, micro air bubbles are employed as a tracer. The corresponding movement is recorded by X-ray apparatus and its velocity is measured by PIV （particle image velocimetry）. It is found that, the micro-pump developed here can make the working fluid flow. The corresponding fluid flow in the micro pump is confirmed by the numerical method.
文摘DAR （diffusion absorption refrigeration） cycle is driven by heat and has no moving parts. It is based on refrigerant and absorbent as the working fluid together with hydrogen as an auxiliary inert gas. To circulate the working fluid without a mechanical pump, the diffusion absorption cycle relies on a bubble pump. Experimental system was designed and operated. Its aim was to investigate the performance of a bubble pump operating with three lifting tubes. The experimental results of the system were compared to existing models. The comparison showed that there was a bad agreement between the experimental and the theoretical results.
文摘Nowadays Computational Fluid Dynamics （CFD） software is adopted as a design and analysis tool in a great number of engineering fields. We can say that single-physics CFD has been suffciently matured in the practical point of view. The main target of existing CFD software is single-phase flows such as water and air. However, many multi-physics problems exist in engineering. Most of them consist of flow and other physics, and the interactions between different physics are very important. Obviously, multi-physics phenomena are critical in devel- oping machines and processes. A multi-physics phenomenon seems to be very complex, and it is so difficult to be predicted by adding other physics to flow phenomenon. Therefore, multi-physics CFD techniques are still under research and development. This would be caused from the facts that processing speed of current computers is not fast enough for conducting a multi-physics simulation, and furthermore physical models except for flow physics have not been suitably established. Therefore, in near future, we have to develop various physical models and ef- ficient CFD techniques, in order to success multi-physics simulations in engineering. In the present paper, I will describe the present states of multi-physics CFD simulations, and then show some numerical results such as ice accretion and electro-chemical machining process of a three-dimensional compressor blade which were obtained in my laboratory. Multi-physics CFD simulations would be a key technology in near future.
