The intellectual property protection, whether judicial or administrative, is evaluated through a performance evaluation indicator system. To building up such a system, we must follow certain working procedures which u...The intellectual property protection, whether judicial or administrative, is evaluated through a performance evaluation indicator system. To building up such a system, we must follow certain working procedures which usually consist of four steps： to determine the performance objectives, to design the structure of indicator system, to specify the indicators and to set up the weight of indicators. Each step plays a different role in performance evaluation indicator system and has its own impact on the realization of performance evaluation objectives respectively. So the scientifically building up a performance evaluation indicator system is the key to determine whether the intellectual property is protected well or not.展开更多
Thermodynamics analysis was carried out for solar thermal receivers with different selective coatings.The relation between the energy conversion efficiency of a medium-high temperature solar thermal system,the spectra...Thermodynamics analysis was carried out for solar thermal receivers with different selective coatings.The relation between the energy conversion efficiency of a medium-high temperature solar thermal system,the spectral properties of selective coating and the operating temperature of the receiver were discussed.Furthermore,the relation between the optimum operating temperatures,the exergy efficiencies and the incident solar flux were analyzed for the traditional concentrating system and concentrating beam splitting system,respectively.According to the analysis results for the thermal receiver with blackbody surface and selective coatings,the optimum cutoff wavelength was obtained for the ideal selective coating.An analysis method for the optimum operating temperature calculation was developed for thermal receivers with selective coating.The optimum operating temperature for an actual selective coating was analyzed on the basis of the proposed theory.展开更多
An optical transceiver with a novel optical subassembly structure is proposed in this paper, which achieves high coupling efficiency and low assembly difficulty. The proposed optical transceiver consumes 0.9 W power a...An optical transceiver with a novel optical subassembly structure is proposed in this paper, which achieves high coupling efficiency and low assembly difficulty. The proposed optical transceiver consumes 0.9 W power and retains a small size of 28 mmx16 mmx3 mm. The fabrication process of the silicon substrate and the assembly process of the optical transceiver are demonstrated in details. Moreover, the optical transceiver is measured in order to verify its transmission performance. The clear eye diagrams and the low bit error rate （BER） less than 1013 at 10 Gbit/s per channel show good transmission characteristics of the designed optical transceiver.展开更多
文摘The intellectual property protection, whether judicial or administrative, is evaluated through a performance evaluation indicator system. To building up such a system, we must follow certain working procedures which usually consist of four steps： to determine the performance objectives, to design the structure of indicator system, to specify the indicators and to set up the weight of indicators. Each step plays a different role in performance evaluation indicator system and has its own impact on the realization of performance evaluation objectives respectively. So the scientifically building up a performance evaluation indicator system is the key to determine whether the intellectual property is protected well or not.
基金supported by the National Basic Research Program of China("973" Project)(Grant No.2010CB227305)
文摘Thermodynamics analysis was carried out for solar thermal receivers with different selective coatings.The relation between the energy conversion efficiency of a medium-high temperature solar thermal system,the spectral properties of selective coating and the operating temperature of the receiver were discussed.Furthermore,the relation between the optimum operating temperatures,the exergy efficiencies and the incident solar flux were analyzed for the traditional concentrating system and concentrating beam splitting system,respectively.According to the analysis results for the thermal receiver with blackbody surface and selective coatings,the optimum cutoff wavelength was obtained for the ideal selective coating.An analysis method for the optimum operating temperature calculation was developed for thermal receivers with selective coating.The optimum operating temperature for an actual selective coating was analyzed on the basis of the proposed theory.
基金supported by the National High Technology Research and Development Program of China(No.2015AA016904)
文摘An optical transceiver with a novel optical subassembly structure is proposed in this paper, which achieves high coupling efficiency and low assembly difficulty. The proposed optical transceiver consumes 0.9 W power and retains a small size of 28 mmx16 mmx3 mm. The fabrication process of the silicon substrate and the assembly process of the optical transceiver are demonstrated in details. Moreover, the optical transceiver is measured in order to verify its transmission performance. The clear eye diagrams and the low bit error rate （BER） less than 1013 at 10 Gbit/s per channel show good transmission characteristics of the designed optical transceiver.
