Plowing-extruding tool was designed and plowing-extruding process was investigated.Then,a manufacturing method of integral serrated high-finned tube,plowing-extruding based on variational feed was proposed,in which pl...Plowing-extruding tool was designed and plowing-extruding process was investigated.Then,a manufacturing method of integral serrated high-finned tube,plowing-extruding based on variational feed was proposed,in which plowing-extruding tool moved forward at two different feeds,f1 and f2,in turn.In this method,overlaps that are usually avoided in practical application were utilized to manufacture high fins and average height of fins was up to 1.58 mm.The critical feed(fc) of overlaps forming and terms of high fins forming were analyzed.The main technical parameters that affect the fins height were discussed.The experimental results show that the fins height increases with extruding inclination angle and plowing-extruding depth,and the fins height increases with f1 increasing when f1 is smaller than fc,and decreases with f1 increasing if f1 is larger than fc.展开更多
Glutaminase is used industrially to enhance flavor and aroma and to enrich foodstuffs nutritionally. It also has potential for pharmaceutical application as anti-leukemia agent. The bacteria of Zymomonas mobilis has b...Glutaminase is used industrially to enhance flavor and aroma and to enrich foodstuffs nutritionally. It also has potential for pharmaceutical application as anti-leukemia agent. The bacteria of Zymomonas mobilis has been studied for ethanol production, however, there is no study regarding glutaminase production. The aim of the present study was to establish the influencing factors for the growth of Z mobilis and its relationship with glutaminase production using statistical tools. Analysis of variance in blocks was carried out in a complete block design and the Tukey test demonstrated the importance of the components of the culture medium, absence of agitation and fermentation time. Minimum culture medium was used in the optimization varying the glucose concentrations （10, 30, and 50 g/L）, glutamine （0, 0.5 and 1g/L） and culture time （18, 24 and 30 hours）. Maximum production was obtained at 8.86 U/L glutaminase. Optimized conditions were used in the growth kinetics, where typical exponential growth was observed. Glutaminase production was shown to be related to biomass production.展开更多
Educational achievement and age correlatives may have significant bearings on generation, maintenance, and sustenance of environment to disseminate education for comprehensive development of learners as permeation of ...Educational achievement and age correlatives may have significant bearings on generation, maintenance, and sustenance of environment to disseminate education for comprehensive development of learners as permeation of learning and its diffusion rate may vary depending upon different achievements on literacy scale for different age groups. More so, for disable learners as such learners need additional initiatives and assisting environment of even more literate fellow beings constituting surroundings. From this perspective, this paper makes a descriptive analytical effort to present census （2011） results in evaluating overall literacy position and that for disable ones alongwith environment availability through simple statistical tools展开更多
Six Sigma was introduced as a quality management tool at Motorola in the 1980s. Since then, leading U.S. companies have gained significant financial and non-financial benefits/results from the implementation of Six Si...Six Sigma was introduced as a quality management tool at Motorola in the 1980s. Since then, leading U.S. companies have gained significant financial and non-financial benefits/results from the implementation of Six Sigma projects. Despite Six Sigma popularity, some companies have failed to gain quantifiable net financial benefits/results from Six Sigma implementation. In the process of Six Sigma implementation, vital components are critical factors and key ingredients for the success of Six Sigma projects because if these vital components do not exist, Six Sigma projects have little chance of success. Thus, this paper identifies most influencing and least influencing vital components. The results are generated from a survey conducted in U.S. Fortune 500 companies employing descriptive statistics. Based on the data analysis, ＂leadership commitment to Six Sigma＂ was the most influencing vital component and ＂overall, training on Six Sigma to reduce employee turnover＂ was the least influencing vital component.展开更多
Group signature schemes are fundamental cryptographic tools. A group signature scheme allows members of a group to anonymously sign misuse, the anonymity messages. To counter can be revoked by the group manager. The g...Group signature schemes are fundamental cryptographic tools. A group signature scheme allows members of a group to anonymously sign misuse, the anonymity messages. To counter can be revoked by the group manager. The group joining operation is a critical component of group signature scheme, the framing attack can be prevented by group joining processes. This paper presents an efficient group signature scheme with a simple joining protocol that is based on a ＂single message and signature response＂ interaction between the prospective user and the group manager. The security of our group signature is based on the Discrete Logarithm assumption and Decisional Linear Diffie- Hellman assumption. The formal security proof of our scheme is given in the random oracle model. Our scheme is also a very efficient short group signature scheme with efficient concurrent join.展开更多
This research aimed to determine instruments for analysis of knowledge management in operators companies of metropolitan transport systems. How much the goal was an exploratory research, how much the procedure was a l...This research aimed to determine instruments for analysis of knowledge management in operators companies of metropolitan transport systems. How much the goal was an exploratory research, how much the procedure was a literature search, how much as nature was an applied research, and how much as approach was qualitative research？ The following instruments were identified and selected： （a） the methodology for the analysis of metropolitan transport systems; （b） the knowledge management maturity model （Siemens）; and （c） Documentation and Information Centre. The simulation, using the tools in the knowledge management to analyze the Company Metropolitan of S^io Paulo--METRO, identified the need for improvements in eight areas and the problems： （1） rethink the knowledge management area; （2） develop new knowledge management policies; （3） define responsibilities in knowledge management area; （4） implement new knowledge management processes; （5） explore new ways and structures of knowledge; （6） consider the internal and external actors in knowledge management actions; （7） expand the dissemination of the collaborative culture; and （8） integrate in the knowledge management area current and future initiatives. The analysis shows that the transposition of the current situation to the desired situation for the company can be obtained with the implementation of an Information and Documentation Centre. The conclusion is that this set of tools allows to characterize, evaluate, and model the knowledge management in this business.展开更多
In recent years, high precision geometric shape, surface roughness, and cost reduction are required for large glass component molding processes. In this research, the polishing process of stainless steel molding dies ...In recent years, high precision geometric shape, surface roughness, and cost reduction are required for large glass component molding processes. In this research, the polishing process of stainless steel molding dies used to form thin glass components is investigated. The surface roughness of the polished stainless steel molding die surface is below Rz = 200 nm （P-V） at 15 h polishing with 0.5 % alumina polishing liquid. In the case of polishing process with only the weight of molding die and a polishing pressure of 0.5 kPa, polishing times are approximately 60 h and 20 h, respectively. Final surface roughness polished stainless steel molding die surface with pressure of 0.5 kPa is Rz = 7 nm （P-V）, rms -- 1.6 nm and Ra = 1.4 nm. In a thin glass component manufacturing method, ＂slumping method＂, surface roughness before glass forming is rms = 0.7 nm and Ra = 0.6 nm, and after is rms = 0.7 nm and Ra = 0.6 nm. Therefore, there were no observable changes their surface roughness.展开更多
基金Project(50605023) supported by the National Natural Science Foundation of China
文摘Plowing-extruding tool was designed and plowing-extruding process was investigated.Then,a manufacturing method of integral serrated high-finned tube,plowing-extruding based on variational feed was proposed,in which plowing-extruding tool moved forward at two different feeds,f1 and f2,in turn.In this method,overlaps that are usually avoided in practical application were utilized to manufacture high fins and average height of fins was up to 1.58 mm.The critical feed(fc) of overlaps forming and terms of high fins forming were analyzed.The main technical parameters that affect the fins height were discussed.The experimental results show that the fins height increases with extruding inclination angle and plowing-extruding depth,and the fins height increases with f1 increasing when f1 is smaller than fc,and decreases with f1 increasing if f1 is larger than fc.
文摘Glutaminase is used industrially to enhance flavor and aroma and to enrich foodstuffs nutritionally. It also has potential for pharmaceutical application as anti-leukemia agent. The bacteria of Zymomonas mobilis has been studied for ethanol production, however, there is no study regarding glutaminase production. The aim of the present study was to establish the influencing factors for the growth of Z mobilis and its relationship with glutaminase production using statistical tools. Analysis of variance in blocks was carried out in a complete block design and the Tukey test demonstrated the importance of the components of the culture medium, absence of agitation and fermentation time. Minimum culture medium was used in the optimization varying the glucose concentrations （10, 30, and 50 g/L）, glutamine （0, 0.5 and 1g/L） and culture time （18, 24 and 30 hours）. Maximum production was obtained at 8.86 U/L glutaminase. Optimized conditions were used in the growth kinetics, where typical exponential growth was observed. Glutaminase production was shown to be related to biomass production.
文摘Educational achievement and age correlatives may have significant bearings on generation, maintenance, and sustenance of environment to disseminate education for comprehensive development of learners as permeation of learning and its diffusion rate may vary depending upon different achievements on literacy scale for different age groups. More so, for disable learners as such learners need additional initiatives and assisting environment of even more literate fellow beings constituting surroundings. From this perspective, this paper makes a descriptive analytical effort to present census （2011） results in evaluating overall literacy position and that for disable ones alongwith environment availability through simple statistical tools
文摘Six Sigma was introduced as a quality management tool at Motorola in the 1980s. Since then, leading U.S. companies have gained significant financial and non-financial benefits/results from the implementation of Six Sigma projects. Despite Six Sigma popularity, some companies have failed to gain quantifiable net financial benefits/results from Six Sigma implementation. In the process of Six Sigma implementation, vital components are critical factors and key ingredients for the success of Six Sigma projects because if these vital components do not exist, Six Sigma projects have little chance of success. Thus, this paper identifies most influencing and least influencing vital components. The results are generated from a survey conducted in U.S. Fortune 500 companies employing descriptive statistics. Based on the data analysis, ＂leadership commitment to Six Sigma＂ was the most influencing vital component and ＂overall, training on Six Sigma to reduce employee turnover＂ was the least influencing vital component.
基金This paper is supported by the National Natural Science Foundation of China under Grant No. 61072140, 61373171 the Program of Introducing Talents of Discipline to Universities NO. B08038 the Specialized Research Fund for the Doctoral Program of Higher Education No. 20100203110003.
文摘Group signature schemes are fundamental cryptographic tools. A group signature scheme allows members of a group to anonymously sign misuse, the anonymity messages. To counter can be revoked by the group manager. The group joining operation is a critical component of group signature scheme, the framing attack can be prevented by group joining processes. This paper presents an efficient group signature scheme with a simple joining protocol that is based on a ＂single message and signature response＂ interaction between the prospective user and the group manager. The security of our group signature is based on the Discrete Logarithm assumption and Decisional Linear Diffie- Hellman assumption. The formal security proof of our scheme is given in the random oracle model. Our scheme is also a very efficient short group signature scheme with efficient concurrent join.
文摘This research aimed to determine instruments for analysis of knowledge management in operators companies of metropolitan transport systems. How much the goal was an exploratory research, how much the procedure was a literature search, how much as nature was an applied research, and how much as approach was qualitative research？ The following instruments were identified and selected： （a） the methodology for the analysis of metropolitan transport systems; （b） the knowledge management maturity model （Siemens）; and （c） Documentation and Information Centre. The simulation, using the tools in the knowledge management to analyze the Company Metropolitan of S^io Paulo--METRO, identified the need for improvements in eight areas and the problems： （1） rethink the knowledge management area; （2） develop new knowledge management policies; （3） define responsibilities in knowledge management area; （4） implement new knowledge management processes; （5） explore new ways and structures of knowledge; （6） consider the internal and external actors in knowledge management actions; （7） expand the dissemination of the collaborative culture; and （8） integrate in the knowledge management area current and future initiatives. The analysis shows that the transposition of the current situation to the desired situation for the company can be obtained with the implementation of an Information and Documentation Centre. The conclusion is that this set of tools allows to characterize, evaluate, and model the knowledge management in this business.
文摘In recent years, high precision geometric shape, surface roughness, and cost reduction are required for large glass component molding processes. In this research, the polishing process of stainless steel molding dies used to form thin glass components is investigated. The surface roughness of the polished stainless steel molding die surface is below Rz = 200 nm （P-V） at 15 h polishing with 0.5 % alumina polishing liquid. In the case of polishing process with only the weight of molding die and a polishing pressure of 0.5 kPa, polishing times are approximately 60 h and 20 h, respectively. Final surface roughness polished stainless steel molding die surface with pressure of 0.5 kPa is Rz = 7 nm （P-V）, rms -- 1.6 nm and Ra = 1.4 nm. In a thin glass component manufacturing method, ＂slumping method＂, surface roughness before glass forming is rms = 0.7 nm and Ra = 0.6 nm, and after is rms = 0.7 nm and Ra = 0.6 nm. Therefore, there were no observable changes their surface roughness.
