侯兖亿吨煤运通道扩能的实践

根据铁道部提出建设侯兖亿吨煤运大通道战略要求,郑州铁路局对局管内的有关线路集中力量,强力推进,迅速完成了各项扩能改造任务。但局管内侯月线路段由于工电设备先天不足、机车车辆严重老化,加上车流密度急速增加,设备故障率居高不下。为此,提出了强化专业指导,加强互相配合,增强保障能力等措施,并着重对局管内侯月线设备质量进行整治,为增加晋东南煤炭外运创造了良好的运输环境。

Host Engineering for Red Electrophosphorescent Devices

In this paper, we demonstrate that controlled dopantoncentration is an essential issue for charge carriers transporting in red Phosphorescent Organic Light-Emitting Device （PHOLED）. Carriers transport via dopant molecules in the emitting layer with a single host, however, via both dopant and host molecules when their energy levels are well aligned. Conditions for reduced driving-voltage and enhanced efficiency of red PHOLED are obtained by employing a mixed host structure. A pure red PHOLED with color coordinates of （0.67, 0.33） has been realized by using only 4 wt% dopant, The device achieves 100 cd/cm2 at 2.9 V, with correspond- ing power efficiency of 9.3im/W and external quantum efficiency of 14.3%.

Scientific and technological progress and innovation of Three Gorges Project

In the design,construction and operation periods of the Three Gorges Project (TGP),great challenges have been met in different fields such as water resources and hydropower project construction,electromechanical equipment manufacture and ecological environment protection.In view of the key techniques and difficulties in the construction period,scientific and technological breakthroughs have been made by the experts and scholars of various fields and a series of innovative achievements are gained,which make the scientific and technological levels in relevant fields improved.Some major innovative achievements in the construction and operation of TGP are enumerated,which are significant for the hydropower project construction and clean energy development in the future in China.

An Advanced Teaching Lab for the Setting up of an Islanded Production Unit

The present paper addresses an advanced teaching lab consisting of setting up an islanded production unit. This teaching lab takes place in the very last semester at master level for students in electrical engineering with energy specialization. The purpose of this teaching lab is to combine knowledge learned in different areas such as power electronics, control, electrical machines and networks, and make use of all of them in practice. The present paper describes in detail the different steps followed by the student to set up an islanded production unit.

Carbon-emission calculation of electromechanical energy consumption of different structures during the construction phase

Due to the use of mechanical and electrical equipments in different buildings during construction phase, energy consumption produces large amounts of carbon emissions.Based on the energy use of China, we established a formula that was applicable to carbon-emission calculation, and discussed carbon-emission characteristics of concrete structures and steel construction.Owing to the difference of electrical and mechanical equipment used in construction phase, the results show that under the same conditions, the carbon emission intensity of a concrete structure building is much higher than that of a steel building.At last, we also put forward some emission reduction measures based on the calculation data of different buildings.

Analysis on Economic Performance of Electrical Equipment Industry in 2010

In this paper the analysis is presented on the economic performance of the electrical equipment industry in 2010.Substantial increase was seen in both the economic aggregate indices such as production and sales,and economic efficiency indices such as profits.Increase of indices that reflect foreign trade situation of the industry,such as import volume,export volume,gross import and export volume,and export delivery volume were prominent in particular.The industry has completely stepped out of the "negative growth" predicament in 2009,comprehensively outperformed the level in 2008,and recovered true growth.The economic situation of the electrical equipment industry in 2011 is also predicted in this paper.

Artificial molecular machines that can perform work

An artificial molecular machine consists of molecule or substituent components jointed together in a specific way so that their mutual displacements could be initiated using appropriate outside stimuli. Such an ability of performing mechanical motions by consuming external energy has endowed these tiny machines with vast fascinating potential applications in areas such as actuators, manipulating atoms/molecules, drug delivery, molecular electronic devices, etc. To date, although vast kinds of molecular machine archetypes have been synthesized in facile ways, they are inclined to be defined as switches but not true machines in most cases because no useful work has been done during a working cycle. More efforts need to be devoted on the utilization and amplification of the nanoscale mechanical motions among synthetic molecular machines to accomplish useful tasks. Here we highlight some of the recent advances relating to molecular machines that can perform work on different length scales, ranging from microscopic levels to macroscopic ones.

Influence of motor cable on common-mode currents in an inverter-fed motor drive system

Induction motor drive systems fed by cables are widely used in industrial applications. However, high-frequency switching of power devices will cause common-mode（CM） voltages during operation, leading to serious CM currents in the motor drive systems. CM currents through the cables and motors in the drive systems can cause electromagnetic interference（EMI） with the surrounding electronic equipment and shorten the life of induction motors. Therefore, it is necessary to analyze the CM currents in motor drive systems. In this paper, high-frequency models of unshielded and shielded power cables are formulated. The frequency-dependent effects and mutual inductances of the cables are taken into account. The power cable parameters are extracted by the finite element method and validated by measurements. High-frequency models of induction motors and inverters are introduced from existing works. The CM currents at the motor and inverter terminals are obtained, and the influence of the cable length and cable type on the CM currents is analyzed. There is a good agreement between the experimental results and the CM currents predicted by the proposed models.

Development of a 50-year daily surface solar radiation dataset over China

Although solar radiation is a crucial parameter in designing solar power devices and studying land surface processes,long-term and densely distributed observations of surface solar radiation are usually not available.This paper describes the development of a 50-year dataset of daily surface solar radiation at 716 China Meteorological Administration(CMA) stations.First,a physical model,without any local calibration,is applied to estimate the daily radiation at all 716 CMA routine stations.Then,an ANN-based(Artificial Neural Network) model is applied to extend radiation estimates to earlier periods at each of all 96 CMA radiation stations.The ANN-based model is trained with recent reliable radiation data and thus its estimate is more reliable than the physical model.Therefore,the ANN-based model is used to correct the physical model dynamically at a monthly scale.The correction generally improves the accuracy of the radiation dataset estimated by the physical model:the mean bias error(MBE) averaged over all the 96 radiation stations during 1994-2002 is reduced from 0.68 to 0.11 MJ m-2 and the root mean square error(RMSE) from 2.01 to 1.80 MJ m-2.The new radiation dataset shows superior performance over previous estimates by locally calibrated ngstr m-Prescott models.Based on the new radiation dataset,the annual mean daily solar radiation over China is 14.3 MJ m-2.The maximal seasonal mean daily solar radiation occurs in the Tibetan Plateau during summer with a value of 27.1 MJ m-2,whereas the minimal seasonal mean daily solar radiation occurs in the Sichuan Basin during winter with a value of 4.7 MJ m-2.