The recent works on the development of computational mass transfer （CMT） method and its applications in chemical process simulation are reviewed. Some development strategies and challenges in future research are als...The recent works on the development of computational mass transfer （CMT） method and its applications in chemical process simulation are reviewed. Some development strategies and challenges in future research are also discussed.展开更多
In this paper, an improved hybrid differential evolution-estimation of distribution algorithm (IHDE-EDA) is proposed for nonlinear programming (NLP) and mixed integer nonlinear programming (MINLP) models in engineerin...In this paper, an improved hybrid differential evolution-estimation of distribution algorithm (IHDE-EDA) is proposed for nonlinear programming (NLP) and mixed integer nonlinear programming (MINLP) models in engineering optimization fields. In order to improve the global searching ability and convergence speed, IHDE-EDA takes full advantage of differential information and global statistical information extracted respectively from differential evolution algorithm and annealing mechanism-embedded estimation of distribution algorithm. Moreover, the feasibility rules are used to handle constraints, which do not require additional parameters and can guide the population to the feasible region quickly. The effectiveness of hybridization mechanism of IHDE-EDA is first discussed, and then simulation and comparison based on three benchmark problems demonstrate the efficiency, accuracy and robustness of IHDE-EDA. Finally, optimization on an industrial-size scheduling of two-pipeline crude oil blending problem shows the practical applicability of IHDE-EDA.展开更多
The state of deep mine rigid shaft fUrniture horizontal force calculation in China is introduced and the calculating model of horizontal force is determined. Based on the interaction between hoisting vessel and shaft ...The state of deep mine rigid shaft fUrniture horizontal force calculation in China is introduced and the calculating model of horizontal force is determined. Based on the interaction between hoisting vessel and shaft furniture, the vertical mobel test device is built and a large number of model tests and analyses are carried out. At last, the relationship between horizontal force and hoisting end load, hoisting speed or bunton level interval is gained. The three parameters horizontal force calculating equation of beep mine rigid shaft furniture is given and it can guide the design and calculation of shaft engineering.展开更多
For solving water entry problems, a numerical method is presented, which is a CFD method based on free surface capturing method and Cartesian cut cell mesh.In this approach, incompressible Euler equations for a variab...For solving water entry problems, a numerical method is presented, which is a CFD method based on free surface capturing method and Cartesian cut cell mesh.In this approach, incompressible Euler equations for a variable density fluid are numerically calculated by the finite volume method.Then artificial compressibility method, dual time-stepping technique and Roe's approximate Riemann solver are adopted in the numerical scheme.Finally, some application cases are designed to show the ability of the current method to cope with water entry problems in ocean engineering.展开更多
The recursive least-square (RLS) algorithm has been extensively used in adaptive identification, prediction, filtering, and many other fields. This paper proposes adding a second-difference term to the standard recurr...The recursive least-square (RLS) algorithm has been extensively used in adaptive identification, prediction, filtering, and many other fields. This paper proposes adding a second-difference term to the standard recurrent formula to create a novel method for improving tracing capabilities. Test results show that this can greatly improve the convergence capability of RLS algorithms.展开更多
Reentrant impulse in the myocardium is considered to be a major factor promoting electrophysiological abnormalities or even leading to ventricular tachycardias (VTs) and ventricular fibrillations (VFs). Tip trajectory...Reentrant impulse in the myocardium is considered to be a major factor promoting electrophysiological abnormalities or even leading to ventricular tachycardias (VTs) and ventricular fibrillations (VFs). Tip trajectory of the reentrant wave can reflect stability of the electrical propagation and area of the reentrant movement, thereby being considered as one of the most concerned parameters in studying electrical activities during VT/VF. The purpose of the present study is to propose a practical method to find out tip trajectories using a computational approach. In this study Luo-Rudy 1991 mathematical model of the ventricular cell was used. The operator splitting method was utilized to integrate the partial differential equations in the two-dimensional tissue. And spiral waves were initiated by the cut wave front technique. Through experiments we found it was difficult to find out the tips by finding intersection of the two isovoltage lines as proposed in most papers. Therefore, we suggested that tip points were detected by seeking the shortest distance of the two adjacent isovoltage contour lines. The results showed that tip trajectories of these spiral waves found in our way were very near to the tips observed, implying validation of our method in measuring tip trajectories in cardiac reentry.展开更多
A customized combined methodology based on both 2D CFD （computational fluid dynamics） and lumped parameters numerical modeling, useful for simulating the hydraulic behavior of orbit annular machines, has been develo...A customized combined methodology based on both 2D CFD （computational fluid dynamics） and lumped parameters numerical modeling, useful for simulating the hydraulic behavior of orbit annular machines, has been developed and here presented. More in details, the predictive capabilities of this CAE （computer-aided engineering） tool can be applied for the study of both roller and gerotor architectures and considering both pumping and motoring operating mode. First of all, an in-house developed 2D CFD methodology, based on the integration of the stationary form of the Reynolds equation for the determination of the pressure distribution inside the lateral clearances bounded by the sides of the stator-rotor group and the valve plate, as well as the internal manifold surface, is firstly presented and applied. The same computational procedure has been also involved for the investigation of the leakages through the clearance between the valve plate and the balancing ring. After that, a lumped and distributed parameters numerical model has been involved for the simulation of a typical orbit roller motor operation. In this case, particular care has been devoted to the modeling of the axial leakage clearances, adopting analytical interpolation functions deducted from the numerical results calculated applying the previously described 2D CFD methodology. Finally, the whole CAE approach has been validated by means of a comprehensive numerical versus experimental comparison, obtaining a general good accordance for the overall operating field of this particular type of hydraulic unit.展开更多
The introduction of information technology and computers in the design process enables easier, faster and more accurate design of welding technology, as well as higher quality, repeatability and traceability of proces...The introduction of information technology and computers in the design process enables easier, faster and more accurate design of welding technology, as well as higher quality, repeatability and traceability of processes. This paper presents the modeling of welded construction maintenance activities by IDEF0 （Integration DEFinition） methodology. Modeling maintenance activities on a welded construction using IDEF0 methodology, the software implementation of which is the BPWin （Business Process windows） CASE （Computer Aided Software Engineering） tool, allows functional decomposition and design at all levels of the system that consists of workers, machines, materials, computers and information.展开更多
This paper treats multi-objective problem for manufacturing process design. A purpose of the process design is to decide combinations of work elements assigned to different work centers. Multiple work elements are ord...This paper treats multi-objective problem for manufacturing process design. A purpose of the process design is to decide combinations of work elements assigned to different work centers. Multiple work elements are ordinarily assigned to each center. Here, infeasible solutions are easily generated by precedence relationship of work elements in process design. The number of infeasible solutions generated is ordinarily larger than that of feasible solutions generated in the process. Therefore, feasible and infeasible solutions are located in any neighborhood in solution space. It is difficult to seek high quality Pareto solutions in this problem by using conventional multi-objective evolutional algorithms. We consider that the problem includes difficulty to seek high quality solutions by the following characteristics： （1） Since infeasible solutions are resemble to good feasible solutions, many infeasible solutions which have good values of objective functions are easily sought in the search process, （2） Infeasible solutions are useful to select new variable conditions generating good feasible solutions in search process. In this study, a multi-objective genetic algorithm including local search is proposed using these characteristics. Maximum value of average operation times and maximum value of dispersion of operation time in all work centers are used as objective functions to promote productivity. The optimal weighted coefficient is introduced to control the ratio of feasible solutions to all solutions selected in crossover and selection process in the algorithm. This paper shows the effectiveness of the proposed algorithm on simple model.展开更多
基金Supported by the National Science Foundation of China（20736005）.ACKNOWLEDGEMENTSThe authors acknowledge the assistance from thestaff in the State Key Laboratories of Chemical Engineering （Tianjin University）.
文摘The recent works on the development of computational mass transfer （CMT） method and its applications in chemical process simulation are reviewed. Some development strategies and challenges in future research are also discussed.
基金Supported by the National Basic Research Program of China (2012CB720500)the National Natural Science Foundation of China (60974008)
文摘In this paper, an improved hybrid differential evolution-estimation of distribution algorithm (IHDE-EDA) is proposed for nonlinear programming (NLP) and mixed integer nonlinear programming (MINLP) models in engineering optimization fields. In order to improve the global searching ability and convergence speed, IHDE-EDA takes full advantage of differential information and global statistical information extracted respectively from differential evolution algorithm and annealing mechanism-embedded estimation of distribution algorithm. Moreover, the feasibility rules are used to handle constraints, which do not require additional parameters and can guide the population to the feasible region quickly. The effectiveness of hybridization mechanism of IHDE-EDA is first discussed, and then simulation and comparison based on three benchmark problems demonstrate the efficiency, accuracy and robustness of IHDE-EDA. Finally, optimization on an industrial-size scheduling of two-pipeline crude oil blending problem shows the practical applicability of IHDE-EDA.
文摘The state of deep mine rigid shaft fUrniture horizontal force calculation in China is introduced and the calculating model of horizontal force is determined. Based on the interaction between hoisting vessel and shaft furniture, the vertical mobel test device is built and a large number of model tests and analyses are carried out. At last, the relationship between horizontal force and hoisting end load, hoisting speed or bunton level interval is gained. The three parameters horizontal force calculating equation of beep mine rigid shaft furniture is given and it can guide the design and calculation of shaft engineering.
基金Supported by the National 863 Plan Foundation under Grant No.2006AA09A104
文摘For solving water entry problems, a numerical method is presented, which is a CFD method based on free surface capturing method and Cartesian cut cell mesh.In this approach, incompressible Euler equations for a variable density fluid are numerically calculated by the finite volume method.Then artificial compressibility method, dual time-stepping technique and Roe's approximate Riemann solver are adopted in the numerical scheme.Finally, some application cases are designed to show the ability of the current method to cope with water entry problems in ocean engineering.
文摘The recursive least-square (RLS) algorithm has been extensively used in adaptive identification, prediction, filtering, and many other fields. This paper proposes adding a second-difference term to the standard recurrent formula to create a novel method for improving tracing capabilities. Test results show that this can greatly improve the convergence capability of RLS algorithms.
基金National Natural Science Foundation of P.R.ChinaGrant number:30870659+1 种基金Heatth Foundation of Shanxi Province:08D23Scientific Research Fund of Hunan Provincial Education Department
文摘Reentrant impulse in the myocardium is considered to be a major factor promoting electrophysiological abnormalities or even leading to ventricular tachycardias (VTs) and ventricular fibrillations (VFs). Tip trajectory of the reentrant wave can reflect stability of the electrical propagation and area of the reentrant movement, thereby being considered as one of the most concerned parameters in studying electrical activities during VT/VF. The purpose of the present study is to propose a practical method to find out tip trajectories using a computational approach. In this study Luo-Rudy 1991 mathematical model of the ventricular cell was used. The operator splitting method was utilized to integrate the partial differential equations in the two-dimensional tissue. And spiral waves were initiated by the cut wave front technique. Through experiments we found it was difficult to find out the tips by finding intersection of the two isovoltage lines as proposed in most papers. Therefore, we suggested that tip points were detected by seeking the shortest distance of the two adjacent isovoltage contour lines. The results showed that tip trajectories of these spiral waves found in our way were very near to the tips observed, implying validation of our method in measuring tip trajectories in cardiac reentry.
文摘A customized combined methodology based on both 2D CFD （computational fluid dynamics） and lumped parameters numerical modeling, useful for simulating the hydraulic behavior of orbit annular machines, has been developed and here presented. More in details, the predictive capabilities of this CAE （computer-aided engineering） tool can be applied for the study of both roller and gerotor architectures and considering both pumping and motoring operating mode. First of all, an in-house developed 2D CFD methodology, based on the integration of the stationary form of the Reynolds equation for the determination of the pressure distribution inside the lateral clearances bounded by the sides of the stator-rotor group and the valve plate, as well as the internal manifold surface, is firstly presented and applied. The same computational procedure has been also involved for the investigation of the leakages through the clearance between the valve plate and the balancing ring. After that, a lumped and distributed parameters numerical model has been involved for the simulation of a typical orbit roller motor operation. In this case, particular care has been devoted to the modeling of the axial leakage clearances, adopting analytical interpolation functions deducted from the numerical results calculated applying the previously described 2D CFD methodology. Finally, the whole CAE approach has been validated by means of a comprehensive numerical versus experimental comparison, obtaining a general good accordance for the overall operating field of this particular type of hydraulic unit.
文摘The introduction of information technology and computers in the design process enables easier, faster and more accurate design of welding technology, as well as higher quality, repeatability and traceability of processes. This paper presents the modeling of welded construction maintenance activities by IDEF0 （Integration DEFinition） methodology. Modeling maintenance activities on a welded construction using IDEF0 methodology, the software implementation of which is the BPWin （Business Process windows） CASE （Computer Aided Software Engineering） tool, allows functional decomposition and design at all levels of the system that consists of workers, machines, materials, computers and information.
文摘This paper treats multi-objective problem for manufacturing process design. A purpose of the process design is to decide combinations of work elements assigned to different work centers. Multiple work elements are ordinarily assigned to each center. Here, infeasible solutions are easily generated by precedence relationship of work elements in process design. The number of infeasible solutions generated is ordinarily larger than that of feasible solutions generated in the process. Therefore, feasible and infeasible solutions are located in any neighborhood in solution space. It is difficult to seek high quality Pareto solutions in this problem by using conventional multi-objective evolutional algorithms. We consider that the problem includes difficulty to seek high quality solutions by the following characteristics： （1） Since infeasible solutions are resemble to good feasible solutions, many infeasible solutions which have good values of objective functions are easily sought in the search process, （2） Infeasible solutions are useful to select new variable conditions generating good feasible solutions in search process. In this study, a multi-objective genetic algorithm including local search is proposed using these characteristics. Maximum value of average operation times and maximum value of dispersion of operation time in all work centers are used as objective functions to promote productivity. The optimal weighted coefficient is introduced to control the ratio of feasible solutions to all solutions selected in crossover and selection process in the algorithm. This paper shows the effectiveness of the proposed algorithm on simple model.
