In this article,current application,materials,key equipments,finite element(FE) simulation and parts properties of hot stamping are introduced.The investigations of all processes and further excellent processes are de...In this article,current application,materials,key equipments,finite element(FE) simulation and parts properties of hot stamping are introduced.The investigations of all processes and further excellent processes are described.The survey of existing works,especially key equipments has revealed several gaps.Some new ideas and programs are proposed on the basis of traditional process.This article aims at providing an insight into a whole process backgrounds and pointing out the great potential for further investigations and innovations of hot stamping.展开更多
The billets of AM60 alloy, prepared with self-inoculation method, were partially remelted into semisolid state. Effects of process parameters on remelting microstructure of semisolid billet were investigated. Experime...The billets of AM60 alloy, prepared with self-inoculation method, were partially remelted into semisolid state. Effects of process parameters on remelting microstructure of semisolid billet were investigated. Experimental results show that the solid particles obtained with self-inoculation method are in smaller grain size and globular shape after partial remelting, compared with those prepared with other casting methods. In the optimized process conditions, the average size of solid particles of partially remelted billet is 65 μm, and the shape factor is 1.12. The process parameters, i.e. pouting temperature, addition amount of self-inoculants, and the slope angle of multi-stream mixing cooling chalmel have influence on the microstructure of partially remelted billet. The optimized temperature is from 680 ℃ to 700 ℃, addition amount of self-inoculants is between 5% and 7% （mass fraction）, slope angle of multi-stream mixing cooling channel is between 30° and 45°, with which the dendritic microstructure of as-cast billet can be avoided, and the size of solid particles ofremelted billet is reduced.展开更多
A preparation process of 2-methylnaphthalene （2-MN） was proposed by isomerization, side-stream distillation and extractive distillation. The isomerization of alkyl naphthalene was catalyzed by acid-treated HBEA zeol...A preparation process of 2-methylnaphthalene （2-MN） was proposed by isomerization, side-stream distillation and extractive distillation. The isomerization of alkyl naphthalene was catalyzed by acid-treated HBEA zeolites, and the 2-MN selectivity of isomerization was 92.70%. Side-stream distillation and extractive distillation were investigated by simulation, and effects of operation parameters on 2-MN were studied. Further, the simulated results were verified by experiment. Under the optimal condition, the mass fraction of 2-MN reached to 98.09%; in the oroduct, and the yield was 83.84% in refining orocess.展开更多
基金National Science and Technology Supporting Program of China(No.2011BAG03B02)
文摘In this article,current application,materials,key equipments,finite element(FE) simulation and parts properties of hot stamping are introduced.The investigations of all processes and further excellent processes are described.The survey of existing works,especially key equipments has revealed several gaps.Some new ideas and programs are proposed on the basis of traditional process.This article aims at providing an insight into a whole process backgrounds and pointing out the great potential for further investigations and innovations of hot stamping.
基金Project(2007CB613700) supported by the National Basic Research Program of ChinaProject(50964010) supported by the National Natural Science Foundation of ChinaProject(090WCGA894) supported by the International S&T Cooperation Program of Gansu Province,China
文摘The billets of AM60 alloy, prepared with self-inoculation method, were partially remelted into semisolid state. Effects of process parameters on remelting microstructure of semisolid billet were investigated. Experimental results show that the solid particles obtained with self-inoculation method are in smaller grain size and globular shape after partial remelting, compared with those prepared with other casting methods. In the optimized process conditions, the average size of solid particles of partially remelted billet is 65 μm, and the shape factor is 1.12. The process parameters, i.e. pouting temperature, addition amount of self-inoculants, and the slope angle of multi-stream mixing cooling chalmel have influence on the microstructure of partially remelted billet. The optimized temperature is from 680 ℃ to 700 ℃, addition amount of self-inoculants is between 5% and 7% （mass fraction）, slope angle of multi-stream mixing cooling channel is between 30° and 45°, with which the dendritic microstructure of as-cast billet can be avoided, and the size of solid particles ofremelted billet is reduced.
基金Supported by the Key Discipline Construction of 211 Project IV in China(No.1843202543)Research Innovation Program for College Graduates of Jiangsu Province(No.KYLX15_0728)Science and Technology Program of Jiangsu Province(No.BY2012003)
文摘A preparation process of 2-methylnaphthalene （2-MN） was proposed by isomerization, side-stream distillation and extractive distillation. The isomerization of alkyl naphthalene was catalyzed by acid-treated HBEA zeolites, and the 2-MN selectivity of isomerization was 92.70%. Side-stream distillation and extractive distillation were investigated by simulation, and effects of operation parameters on 2-MN were studied. Further, the simulated results were verified by experiment. Under the optimal condition, the mass fraction of 2-MN reached to 98.09%; in the oroduct, and the yield was 83.84% in refining orocess.
