A novel latent thermal initiator, ferricenium tetrafluoroborate salt (FcBF4), for cationic polymerization of epoxides is reported. The activities of FcBF4 for different epoxides, including bisphenol-A-type epoxy oligo...A novel latent thermal initiator, ferricenium tetrafluoroborate salt (FcBF4), for cationic polymerization of epoxides is reported. The activities of FcBF4 for different epoxides, including bisphenol-A-type epoxy oligomer E44, cycloaliphatic epoxy ERL4221, and glycidylether epoxy GGE, were evaluated by differential scanning calorimetry (DSC). The results showed a moderate thermal initiation activity for E44 and GGE at 78℃ and 108℃ respectively. When adding GGE to E44, the reaction was enhanced. The temperature of thermal degradation of the cured specimens for the system of E44/FcBF4, E44+10%GGE/FcBF4 and E44+10%ERL4221/FcBF4 is higher than 350℃.展开更多
The DDA-Ⅱ process aimed at manufacture of diesel fuel meeting the Euro-Ⅳ emission standard from inferior diesel feedstock has been developed and tested in pilot scale. This technology adopts non-noble metal catalyst...The DDA-Ⅱ process aimed at manufacture of diesel fuel meeting the Euro-Ⅳ emission standard from inferior diesel feedstock has been developed and tested in pilot scale. This technology adopts non-noble metal catalysts and a highly integrated two-stage process scheme featuring low investment and operating cost and convenience in operation. Under an appropriate process regime the DDA-Ⅱ technology can process FCC LCO, a blend of straight-run diesel and FCC LCO, or the SR diesel to yield the diesel product streams meeting the Euro-Ⅳ or even higher emission standards.展开更多
文摘A novel latent thermal initiator, ferricenium tetrafluoroborate salt (FcBF4), for cationic polymerization of epoxides is reported. The activities of FcBF4 for different epoxides, including bisphenol-A-type epoxy oligomer E44, cycloaliphatic epoxy ERL4221, and glycidylether epoxy GGE, were evaluated by differential scanning calorimetry (DSC). The results showed a moderate thermal initiation activity for E44 and GGE at 78℃ and 108℃ respectively. When adding GGE to E44, the reaction was enhanced. The temperature of thermal degradation of the cured specimens for the system of E44/FcBF4, E44+10%GGE/FcBF4 and E44+10%ERL4221/FcBF4 is higher than 350℃.
文摘The DDA-Ⅱ process aimed at manufacture of diesel fuel meeting the Euro-Ⅳ emission standard from inferior diesel feedstock has been developed and tested in pilot scale. This technology adopts non-noble metal catalysts and a highly integrated two-stage process scheme featuring low investment and operating cost and convenience in operation. Under an appropriate process regime the DDA-Ⅱ technology can process FCC LCO, a blend of straight-run diesel and FCC LCO, or the SR diesel to yield the diesel product streams meeting the Euro-Ⅳ or even higher emission standards.
