期刊文献+
共找到15篇文章
< 1 >
每页显示 20 50 100
双块式无砟轨道简易工装法施工技术 被引量:2
1
作者 朱江 梁爱珍 《铁道标准设计》 北大核心 2009年第S1期42-47,共6页
结合乌岩山隧道工程实践,在分析比较国内外无砟轨道施工技术的优缺点情况下,通过"三网合一"和三级布网的测量控制,探索出一套使用设备少,简易适用,并能满足质量要求的双块式无砟轨道施工技术。
关键词 铁路隧道 无砟轨道 双块式工装法
下载PDF
桥上CRTS Ⅰ型双块式无砟轨道简易工装法施工技术 被引量:3
2
作者 姜强 《铁道建筑技术》 2010年第1期67-70,共4页
通过武广客运专线竹园特大桥CRTS Ⅰ型双块式无砟轨道施工,介绍了简易工装进行无砟轨道的施工工艺及方法。
关键词 CRTS Ⅰ型双块式无砟轨道 简易工装法作业程序
下载PDF
浅谈工装法在中速碗式磨煤机安装中的应用
3
作者 祝海存 《机电信息》 2015年第30期85-86,共2页
近年来,中速碗式(也称中速辊盘立式)磨煤机以其优越性能被越来越多地应用于大、中型火电发电厂。现以鄂温克2×600 MW电厂为例,介绍中速碗式磨煤机工装法安装的工艺原理、工艺流程、操作要点及质量标准等方面内容。
关键词 中速碗式磨煤机 工艺原理 工装法
下载PDF
海上平台翻转立罐就位作业方法及施工技巧
4
作者 徐庆东 《天津科技》 2022年第12期16-19,共4页
翻转立罐作业是在复杂的动态变化力系控制下进行的重要工序性吊装作业,操作难度大,易发生重大事故。海上平台环境恶劣,施工作业空间有限,致使翻转立罐作业难度更大。为避免海上平台翻转立罐发生事故,介绍了多种翻转立罐作业常规方法及... 翻转立罐作业是在复杂的动态变化力系控制下进行的重要工序性吊装作业,操作难度大,易发生重大事故。海上平台环境恶劣,施工作业空间有限,致使翻转立罐作业难度更大。为避免海上平台翻转立罐发生事故,介绍了多种翻转立罐作业常规方法及工作要点,详细讲解了海上平台单台起重机扳转法和创新升级的工装扳转法,通过对比展现了工装扳转法的亮点,为海上平台后期类似立罐作业提供了借鉴。 展开更多
关键词 翻转立罐 扳转 工装扳转
下载PDF
装配校准对机械可动天线主反射器型面精度影响的研究
5
作者 刘飞 曹子振 +2 位作者 张小成 孙晓辉 盆洪民 《空间电子技术》 2021年第3期91-96,共6页
为保证卫星机械可动天线的电气性能要求,需要对其副反射器和馈源组件进行装配校准。副反射器装配校准对天线主反射器型面精度影响较大。本文采用有限元方法,对不同副反支杆的16种工况进行了分析,得出装配校准对主反射器型面精度值的影... 为保证卫星机械可动天线的电气性能要求,需要对其副反射器和馈源组件进行装配校准。副反射器装配校准对天线主反射器型面精度影响较大。本文采用有限元方法,对不同副反支杆的16种工况进行了分析,得出装配校准对主反射器型面精度值的影响。提出采用工装,在装配校准时直接粘接碳杆和金属接头的方法,减小甚至消除装配应力,使主反射器的型面精度值变化仅为0.01 mm,装配校准效率提高50%以上。 展开更多
关键词 主反射器 型面精度 装配校准 有限元分析 工装法
下载PDF
Influence of maximum decking charge on intensity of blasting vibration 被引量:3
6
作者 凌同华 李夕兵 《Journal of Central South University of Technology》 EI 2006年第3期286-289,共4页
Based on the character of short-time non-stationary random signal, the relationship between the maximum decking charge and energy distribution of blasting vibration signals was investigated by means of the wavelet pac... Based on the character of short-time non-stationary random signal, the relationship between the maximum decking charge and energy distribution of blasting vibration signals was investigated by means of the wavelet packet method. Firstly, the characteristics of wavelet transform and wavelet packet analysis were described. Secondly, the blasting vibration signals were analyzed by wavelet packet based on software MATLAB, and the change of energy distribution curve at different frequency bands were obtained. Finally, the law of energy distribution of blasting vibration signals changing with the maximum decking charge was analyzed. The results show that with the increase of decking charge, the ratio of the energy of high frequency to total energy decreases, the dominant frequency hands of blasting vibration signals tend towards low frequency and hlasting vibration does not depend on the maximum decking charge. 展开更多
关键词 maximum decking charge blasting vibration non-stationary random signal wavelet packet analysis
下载PDF
Scheduling algorithm of dual-armed cluster tools with residency time and reentrant constraints 被引量:6
7
作者 周炳海 高忠顺 陈佳 《Journal of Central South University》 SCIE EI CAS 2014年第1期160-166,共7页
To solve the scheduling problem of dual-armed cluster tools for wafer fabrications with residency time and reentrant constraints,a heuristic scheduling algorithm was developed.Firstly,on the basis of formulating sched... To solve the scheduling problem of dual-armed cluster tools for wafer fabrications with residency time and reentrant constraints,a heuristic scheduling algorithm was developed.Firstly,on the basis of formulating scheduling problems domain of dual-armed cluster tools,a non-integer programming model was set up with a minimizing objective function of the makespan.Combining characteristics of residency time and reentrant constraints,a scheduling algorithm of searching the optimal operation path of dual-armed transport module was presented under many kinds of robotic scheduling paths for dual-armed cluster tools.Finally,the experiments were designed to evaluate the proposed algorithm.The results show that the proposed algorithm is feasible and efficient for obtaining an optimal scheduling solution of dual-armed cluster tools with residency time and reentrant constraints. 展开更多
关键词 dual-armed cluster tools scheduling residency time constraints reentrancy heuristic algorithm
下载PDF
Improvement of publicly verifiable authenticated encryption scheme
8
作者 雷飞宇 陈雯 +1 位作者 马昌社 陈克非 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2007年第1期26-28,共3页
A weakness of unforgeability is found in Ma and Chen scheme, and the root cause is the susceptive linear design in the scheme. In order to avoid the weakness and susceptive linear design, an improvement by means of tw... A weakness of unforgeability is found in Ma and Chen scheme, and the root cause is the susceptive linear design in the scheme. In order to avoid the weakness and susceptive linear design, an improvement by means of two mechanisms including quadratic residue and composite discrete logarithm is proposed, which can defeat the forgery attacks in Ma and Chen scheme. The new scheme remains good confidentiality, public verifiability and efficiency. 展开更多
关键词 CRYPTOGRAPHY SIGNCRYPTION public verifiability
下载PDF
Historical Building Renovation as a Construction Project
9
作者 Daniela Dvomik Perhavec Natasa Suman 《Journal of Civil Engineering and Architecture》 2013年第6期712-722,共11页
Approaches to building renovation require high professional levels, interdisciplinary elements, team work and time to study and do research on the buildings. The process of renovating historic buildings is made up of ... Approaches to building renovation require high professional levels, interdisciplinary elements, team work and time to study and do research on the buildings. The process of renovating historic buildings is made up of agreements and compromises between the interests of the government, common interests, and the motives and interests of individual owners and prospective investors. Research that deals with any portion of cultural heritages always carried out very precisely, but there is still no precise knowledge of how to define a system and draw up a model that accurately represents a cultural heritage. In the existing literature on this topic, the authors have written about the different views of how to explain the construction project as a system. While many authors focus on "sub-phases" directly connected to the building of an object, the process involved in the construction phase often neglects the phases required before beginning work, which culminates in a logical sequence in the process of preparing a project. Irregularities or deficiencies which occur during the preparation process of a project often directly impact the construction itself. What the scope of this impact depends on the approach of the contractual organization, the organization of construction companies and on co-operation between the customer (or architects) and the contractors. Unlike the projects for newly built objects, the conservation projects of cultural heritage are not only more demanding because of lack of knowledge of the building materials, construction, foundation and interaction of the mentioned individual parts into a unit called a building. The authors analyzed the structural aspects of building conservation which were suggested by Beckmaun and Bowles and another methodology, which was developed as part of the 5th framework program for the purpose of providing a comprehensive and interdisciplinary treatment of the revitalization of a historical city. The authors found that both methodologies do not include modern IT tools and methods. By analyzing and monitoring the restoration of historic buildings in Slovenia, specifically in the city of Maribor (including all documentation, interviews and direct views) the authors found that the project was regarded as a collection of individual projects rather than a unified whole (a system). The authors have demonstrated the consequences of structuring a historic building restoration project in a non-systemic way. This type of project can be classified as a non-sustainable renovation. In this article, at first the authors will try to clarify what types of systems and subsystems are considered in renovating historic buildings. The authors show when and why a system becomes stochastic (a probability) and in the end what would be needed to successfully re-establish it back to a determined system. By analyzing the work and reconstruction of old buildings in Maribor, the authors found that it would be necessary to give a new framework with IT tools for the preparation of a historic building restoration project. 展开更多
关键词 Cultural heritages renovation projects general systems theory determined systems stochastic system.
下载PDF
Schedule for Garment Assembly Line Based on Genetic Algorithm
10
作者 王东云 吴俊 刘淑英 《Journal of Donghua University(English Edition)》 EI CAS 2003年第3期104-107,共4页
A new way to solve the scheduling problem ofgarment assembly line based on genetic algorithmwas proposed. The chromosome was decoded usingtask precedence relation and after the operation ofreproduction, crossover and ... A new way to solve the scheduling problem ofgarment assembly line based on genetic algorithmwas proposed. The chromosome was decoded usingtask precedence relation and after the operation ofreproduction, crossover and mutation, the globaloptimal result can be obtained. Fitness function wasrepresented by smoothness Index ( SI ). Thesimulation shows that the method proposed in thispaper is better than the conventional way and theoptimized solution can be got in this way. 展开更多
关键词 Garment sewing Assembly Line SCHEDULE Genetic Algorithm Smoothness Index
下载PDF
A Web-based Intelligent Fashion Design System
11
作者 李继云 方远 《Journal of Donghua University(English Edition)》 EI CAS 2006年第1期36-41,共6页
A web-based fashion design system-FashDesn was developed for non-professionals to make their own style-based design by choosing and combining fashion parts. We use genetic algorithm to find the optimal satisfied style... A web-based fashion design system-FashDesn was developed for non-professionals to make their own style-based design by choosing and combining fashion parts. We use genetic algorithm to find the optimal satisfied style, while the fitness function of GA is approached by artificial neural network. The users’ style intention can be reached through the learning process of the artificial neural network. The system architecture and some realization details of the system are given in the paper. An output contrast for elegant style women’s before and after user’s interaction is used to illustrate its usefulness in the end. 展开更多
关键词 fashion design genetic algorithm artificial neural network.
下载PDF
Analysis of Fabric's Visual Image Based on Seasonal Application to Clothing
12
作者 丛杉 周旭东 《Journal of Donghua University(English Edition)》 EI CAS 2004年第2期60-62,共3页
Fabric’s visual image is on important that affects its seasonal application to clothing. In this paper, color and luster property of the fabric were simultaneously considered to elaborate application to clothing in s... Fabric’s visual image is on important that affects its seasonal application to clothing. In this paper, color and luster property of the fabric were simultaneously considered to elaborate application to clothing in seasons. Fabric samples were selected in the four seasons, which were quantified by using the Muncell color system. The data of the color attributes and fabric’s surface luster property were analyzed, which applied in spring, summer, autumn and winter. 展开更多
关键词 fabric visual image color attributes seasonal application
下载PDF
THE MODEL TEST RESEARCH OF HORIZONTAL FORCE ON RIGID SHAFT FURNITURE IN DEEP MINE
13
作者 刘志强 史天生 +1 位作者 郭晋蒲 王东权 《Journal of Coal Science & Engineering(China)》 1998年第1期15-19,共5页
The state of deep mine rigid shaft fUrniture horizontal force calculation in China is introduced and the calculating model of horizontal force is determined. Based on the interaction between hoisting vessel and shaft ... The state of deep mine rigid shaft fUrniture horizontal force calculation in China is introduced and the calculating model of horizontal force is determined. Based on the interaction between hoisting vessel and shaft furniture, the vertical mobel test device is built and a large number of model tests and analyses are carried out. At last, the relationship between horizontal force and hoisting end load, hoisting speed or bunton level interval is gained. The three parameters horizontal force calculating equation of beep mine rigid shaft furniture is given and it can guide the design and calculation of shaft engineering. 展开更多
关键词 rigid shaft furniture model test horizontal force calculating method
下载PDF
A Multi-agent Artificial Immune Network Algorithm for the Tray Efficiency Estimation of Distillation Unit
14
作者 史旭华 钱锋 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2012年第6期1148-1153,共6页
Based on the immune mechanics and multi-agent technology, a multi-agent artificial immune network (Maopt-aiNet) algorithm is introduced. Maopt-aiNet makes use of the agent ability of sensing and acting to overcome pre... Based on the immune mechanics and multi-agent technology, a multi-agent artificial immune network (Maopt-aiNet) algorithm is introduced. Maopt-aiNet makes use of the agent ability of sensing and acting to overcome premature problem, and combines the global and local search in the searching process. The performance of the proposed method is examined with 6 benchmark problems and compared with other well-known intelligent algorithms. The experiments show that Maopt-aiNet outperforms the other algorithms in these benchmark functions. Furthermore, Maopt-aiNet is applied to determine the Murphree efficiency of distillation column and satisfactory results are obtained. 展开更多
关键词 distillation unit OPTIMIZATION immune network MULTI-AGENT
下载PDF
Innovative Thought on College Assessment Method of Professional Courses in Fashion Engineering
15
作者 Yue haiying Yang kun Sun jian 《International English Education Research》 2014年第4期80-82,共3页
Summarize the value of current assessment method college course assessment in fashion engineering major, ensure the of professional course and existing problems, discuss how to innovate fashion engineering major build... Summarize the value of current assessment method college course assessment in fashion engineering major, ensure the of professional course and existing problems, discuss how to innovate fashion engineering major build the training method to nurture talents with practical and innovative abilities, improve the innovative ability of college students comprehensively, and promote the long-term de-velopment of college fashion engineering major by analyzing the college course assessment in fashion engineering. 展开更多
关键词 College fashion engineering major assessment method INNOVATION
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部