期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
基于Fluent的煤矿井下巷道粉尘运动的仿真研究 被引量:5
1
作者 王望 《机械工程与自动化》 2019年第3期98-99,共2页
煤矿井下巷道粉尘是造成人员伤害和设备损坏的重要因素,利用三维建模软件SolidWorks对井下巷道建模和参数设定,利用Fluent软件分别对矿车逆风运动、顺风运动、静止3种状态下的粉尘浓度分布进行仿真及分析,并以云状分布图的形式直观展示... 煤矿井下巷道粉尘是造成人员伤害和设备损坏的重要因素,利用三维建模软件SolidWorks对井下巷道建模和参数设定,利用Fluent软件分别对矿车逆风运动、顺风运动、静止3种状态下的粉尘浓度分布进行仿真及分析,并以云状分布图的形式直观展示出来。其仿真分析结果对后续喷雾降尘设备的设计具有一定理论指导意义。 展开更多
关键词 巷道粉尘 FLUENT 运动仿真
下载PDF
矿车运动对巷道粉尘浓度分布影响的CFD仿真 被引量:1
2
作者 石磊 温禄淳 《煤炭技术》 CAS 北大核心 2015年第5期222-224,共3页
矿车的运动对巷道粉尘的浓度分布很大,尤其是在风流的影响下,针对逆风、无风和顺风的情况,运用Fluent对巷道中粉尘的分布规律进行模拟仿真。结果表明:矿车运行时,巷道两壁和上方空间会产生大量粉尘;顺风矿车时,巷道粉尘浓度分布比较均匀... 矿车的运动对巷道粉尘的浓度分布很大,尤其是在风流的影响下,针对逆风、无风和顺风的情况,运用Fluent对巷道中粉尘的分布规律进行模拟仿真。结果表明:矿车运行时,巷道两壁和上方空间会产生大量粉尘;顺风矿车时,巷道粉尘浓度分布比较均匀;逆风矿车时,巷道粉尘主要集中于矿车尾部,对其研究为更好地设计和布置喷雾降尘装置提供了参考。 展开更多
关键词 巷道粉尘 矿车运动 浓度分布 FLUENT
下载PDF
煤矿井下巷道快速洒水冲尘装置的研制与应用 被引量:3
3
作者 谢俊生 魏伟 +1 位作者 刘俊平 李耀谦 《煤矿机械》 北大核心 2020年第3期145-148,共4页
针对煤矿井下主要采用人工冲洗巷道沉积煤尘且巷道内浮游粉尘定点治理存在局限性的现状,研制了纯机械结构的快速洒水冲尘装置,并基于使用地点的粉尘特性研制了洒水冲尘专用湿润剂。通过现场应用,该快速洒水冲尘装置治理巷道沉积粉尘效... 针对煤矿井下主要采用人工冲洗巷道沉积煤尘且巷道内浮游粉尘定点治理存在局限性的现状,研制了纯机械结构的快速洒水冲尘装置,并基于使用地点的粉尘特性研制了洒水冲尘专用湿润剂。通过现场应用,该快速洒水冲尘装置治理巷道沉积粉尘效果显著,并可充分润湿巷道底板,避免二次扬尘,大大提高了井下洒水冲尘效率。未添加湿润剂时巷道内浮尘的平均降尘效率达到73.1%,添加湿润剂后平均降尘效率达到82.6%。 展开更多
关键词 巷道沉积粉尘 洒水冲尘 二次扬尘 浮游粉尘 湿润剂
下载PDF
Effect of suppressing dust by multi-direction whirling air curtain on fully mechanized mining face 被引量:6
4
作者 Nie Wen Liu Yanghao +3 位作者 Wei Wenle Hu Xiangming Ma Xiao Peng Huitian 《International Journal of Mining Science and Technology》 SCIE EI CSCD 2016年第4期629-635,共7页
A combined method of numerical simulation and field testing was adopted in this study in the interest of solving the problem of hard to control high concentrate dusts on a fully mechanized mining face. In addi- tion, ... A combined method of numerical simulation and field testing was adopted in this study in the interest of solving the problem of hard to control high concentrate dusts on a fully mechanized mining face. In addi- tion, the dust suppression effect of a multi-direction whirling air curtain was studied in this paper. Under the influence of the wall attachment effect, the compressed air which blows out from the two-phase or three-phase radial outlets on the generator of the air curtain can form a multi-direction whirling air curtain, which can cover the whole roadway section of a fully mechanized mining face. The traditional method of controlling dust is a forcing system with exhaust overlap which has the major disadvantage of lacking a jet effect and consequently results in poor dust control. It is difficult to form the air flow field within the range of Lp ≤ 5√S. However, due to the effect of this novel system, the radial airflow can be turned into axial airflow allowing fresh air to flow through the length of the heading. The air flow field which is good at controlling dust diffusion can be formed 12.8 m from the heading face. Furthermore, the field measurement results show that before the application of a multi-direction whirling air curtain, the dust concentration is 348.6 mg/m^3 and 271.4 mg/m^3 respectively at the roadway cross-section measurement points which are 5 m and 10 m from the heading face. However, after the application of the multi-direction whirling air curtain, the dust concentration is only 61.2 mg/m3 and 14.8 mg/m^3, respectively. Therefore, the dust control effect of a multi-direction whirling air curtain is obvious. 展开更多
关键词 Fully mechanized mining face Compressed air Multi-directional whirling air curtain AirflowDust suppression
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部