布单在多管道手术患者转运中的应用

目的探讨布单在多管道手术患者转运中的应用效果。方法以2012年7月1—31日86例行多管道手术患者作为对照组,2012年8月1日至9月2日86例多管道手术患者作为观察组,对照组采用传统裸手转运,观察组给予布单转运。比较两组转运过程中患者管道脱落发生率、工作人员腰部承受力减轻情况(腰部在伸直状态、操作面合适度、重心落在支撑面内)及患者满意度。结果观察组患者管道脱落发生率(1.16%)明显低于对照组(3.49%),工作人员腰部受力减轻情况(腰部在伸直状态、操作面合适度、重心落在支撑面内)明显优于对照组(分别为96.10%与33.30%、97.29%与30.12%、92.24%与33.30%),患者满意度(96.43%)优于对照组(91.46%),差异均有统计学意义(P<0.05)。结论布单在安全转运多管道手术患者中的应用,可降低患者管道脱落发生率及工作人员腰部承受力,并可提高患者满意度,值得在安全转运多管道手术患者中推广使用。

自制搬运布单应用于手术患者的效果研究

目的:探讨自制搬运布单应用于手术患者的效果。方法:选择2011年1月～10月妇科及外科手术患者200例,随机分为两组实验组100例,对照组100例,比较两组神经发生损伤情况,医生评价,导尿管,引流管脱落情况和手术人员发生职业损伤的情况。结果:自制搬运布单应用于手术患者术中约束及术后搬运,可以有效的减少患者神经损伤及引流管,尿管的脱落,得到手术医生,麻醉医生的认可。同时也减少了手术人员发生职业损伤的危险性。结论:自制搬运布单一单多用,可以广泛的应用于妇科及外科手术患者中,可代替传统的搬运手术患者方法。

Cellular manufacturing layout on adding/removing machines

In order to rapidly respond to the complex and mutational market, a new facility layout plan based on cellular manufacturing is proposed, which gives consideration to high efficiency and flexibility. The plan designs two phases of integrated cell layout, i.e., cell construction and cell system layout, on the condition of adding/removing machines. First, in view of the costs of logics and machine-relocation, the cell construction based on the alternative processing routes and intra-cell layout are integrated as a whole, which achieves cell formation, process planning and the intra-cell layout in a single step. Secondly, an approach of a continuous optimized multi-line layout for solving the cell system layout problem is proposed, which eliminates the coupling relationship from the machine-relocation and realizes an integrated design of the two phases of the cell layout. An application based on real factory data is optimally solved by the Matlab 7.0 software to validate and verify the models.

Monotonicity of the tail dependence for multivariate t-copula

This paper considers the upper orthant and extremal tail dependence indices for multivariate t-copula. Where, the multivariate t-copula is defined under a correlation structure. The explicit representations of the tail dependence parameters are deduced since the copula of continuous variables is invariant under strictly increasing transformation about the random variables, which are more simple than those obtained in previous research. Then, the local monotonicity of these indices about the correlation coefficient is discussed, and it is concluded that the upper extremal dependence index increases with the correlation coefficient, but the monotonicity of the upper orthant tail dependence index is complex. Some simulations are performed by the Monte Carlo method to verify the obtained results, which are found to be satisfactory. Meanwhile, it is concluded that the obtained conclusions can be extended to any distribution family in which the generating random variable has a regularly varying distribution.

Local structure of calcium silicate melts from classical molecular dynamics simulation and a newly constructed thermodynamic model

The distributions of local structural units of calcium silicate melts were quantified by means of classical molecular dynamics simulation and a newly constructed structural thermodynamic model. The distribution of five kinds of Si-O tetrahedra Qi from these two methods was compared with each other and also with the experimental Raman spectra, an excellent agreement was achieved. These not only displayed the panorama distribution of microstructural units in the whole composition range, but also proved that the thermodynamic model is suitable for the utilization as the subsequent application model of spectral experiments for the thermodynamic calculation. Meanwhile, the five refined regions mastered by different disproportionating reactions were obtained. Finally, the distributions of two kinds of connections between Qi were obtained, denoted as Qi-Ca-Qj and Qi-[Ob]-Qj, from the thermodynamic model, and a theoretical verification was given that the dominant connections for any composition are equivalent connections.

Incremental Placement Algorithm for Standard-Cell Layout

A new algorithm W ECOP is presented to effect incremental changes on a standard cell layout automatically.This algorithm deals with cell inserting and cell moving based on rows instead of on cells as most placement algorithms usually do.An integer programming problem is formulated to minimize the adjustment on the initial placement and a heuristic method is presented to search for a shifting path so as to optimize the wirelength.Test of W ECOP on a group of practical test cases shows that the algorithm can successfully accomplish incremental placement with good quality and high speed.

New Incremental Placement Algorithm Based on Integer Programming for Reducing Congestion

A new incremental placement algorithm C-ECOP for standard cell layout is presented to reduce routing congestion.It first estimates the routing congestion through a new routing model.Then,it formulates an integer linear programming (ILP) problem to determine cell flow direction and to avoid the conflictions between adjacent congestion areas.Experimental results show that the algorithm can considerably reduce routing congestion and preserve the performance of the initial placement with high speed.

Working Condition Real-Time Monitoring Model of Lithium Ion Batteries Based on Distributed Parameter System and Single Particle Model

Lithium ion batteries are complicated distributed parameter systems that can be described preferably by partial differential equations and a field theory. To reduce the solution difficulty and the calculation amount, if a distributed parameter system is described by ordinary differential equations （ODE） during the analysis and the design of distributed parameter system, the reliability of the system description will be reduced, and the systemic errors will be introduced. Studies on working condition real-time monitoring can improve the security because the rechargeable LIBs are widely used in many electronic systems and electromechanical equipment. Single particle model （SPM） is the simplification of LIB under some approximations, and can estimate the working parameters of a LIB at the faster simulation speed. A LIB modelling algorithm based on PDEs and SPM is proposed to monitor the working condition of LIBs in real time. Although the lithium ion concentration is an unmeasurable distributed parameter in the anode of LIB, the working condition monitoring model can track the real time lithium ion concentration in the anode of LIB, and calculate the residual which is the difference between the ideal data and the measured data. A fault alarm can be triggered when the residual is beyond the preset threshold. A simulation example verifies that the effectiveness and the accuracy of the working condition real-time monitoring model of LIB based on PDEs and SPM.

Empirical Bayes Estimation for the Parameter of Two-dimen sional One-side Truncated Distribution Families with Linex Loss

In this paper, we construct the EB estim ation for the parameter of the two-dimensional one side truncat ed distribution fam ilies using Linex loss. The convergence rate of EB estimation is given and it is shown that the proposed empirical Bayes estimaiton can be arbitrarily close to 1 under certain conditions.

Monolithic Integration of Electro-Absorption Modulators and DFB Lasers by Modified Double Stack Active Layer Approach

Monolithic electro absorption modulated distributed feedback(DFB) lasers are proposed and fabricated by using a modified double stack active layer.The 38mA threshold,9dB extinction ratio (from 0 5V to 3 0V),and about 5mW output power at the 100mA operation current are achieved.Compared with other reported results (only 1 5mW at the same operation current) of the traditional stack active structure,the proposed structure improves the output power of devices.

Connection Between Liquid Distribution and Gas-Liquid Mass Transfer in Monolithic Bed

With a particular focus on the connection between liquid flow distribution and gas-liquid mass transfer in monolithic beds in the Taylor flow regime, hydrodynamic and gas-liquid mass transfer experiments were carriedout in a column with a monolithic bed of cell density of 50 cpsi with trio different distributors （nozzle and packed bed distributors）. Liquid saturation in individual channels was measured by using self-made micro-conductivity probes. A mal-distribution factor was used to evaluate uniform degree of phase distribution in monoliths. Overall bed pressure drop and mass transfer coefficients were measured. For liquid flow distribution and gas-liquid masstransfer, it is found that the superficial liquid velocity is a crucial factor and the packed bed distributor is better than the nozzle distributor. A semi-theoretical analysis using single channel models shows that the packed bed distributor always yields shorter and uniformly distributed liquid slugs compared to the nozzle distributor, which in turn ensures a better mass transfer performance. A bed scale mass transfer model is proposed by employing the single channel models in individual channels and incorporating effects of non-uniform liquid distribution along the bedcross-section. The model predicts the overall gas-liquid mass transfer coefficient wig a relative error within ＋30%.

Process design for multi-stage stretch forming of aluminium alloy aircraft skin

A process design approach for multi-stage stretch forming was proposed by combining the strain distribution method and finite element method(FEM)to determine the minimum stage number and deformation amount of each stage.The strain distribution method was used to calculate the deformation amount of each stage and evaluate the formability through a safety criterion.FE simulation was taken as an analysis tool to reveal the deformation behaviour,to predict the strain contour and to determine the process parameters at each stage.To evaluate the effect of heat treatment after pre-strain on occurrence of deformation defects during the subsequent deformation,a multi-stage uniaxial tension test for 2B06 aluminium alloy sheet was carried out.A case study demonstrates that the approach has high reliability and good practicability.

Thermal Transport in One-Dimensional FPU-FK Lattices

Thermal transport in the FPU model with Kutta algorithm. The heat flux, local temperature profile, that temperature gradient scales behave as N-1 linearly. FK on-site potential is studied by using fourth-order Runge- and heat conductivity axe simulated and analyzed. It is found The divergence of heat conductivity ~ with system size N is in term of κ ∝ N^α with α = 0.44. It is shown that thermal transport is mainly dependent on the FPU nonlinear and the FK interactions.

Distributed Low-Complexity Channel Assignment for Opportunistic Routing

Opportunistic Routing (OR) involves multiple forwarding candidates to relay packets by taking advantage of the broadcast nature and multi-user diversity of a wireless medium. Compared with Traditional Routing (TR), OR is more suitable in the case of an unreliable wireless link and can evidently improve the end-to-end throughput of Wireless Mesh Networks (WMNs). In this paper, we focus on OR in Multi-Radio Multi-Channel WMNs (MRMC-WMNs). This problem has not been well examined and is considerably more challenging than the OR in single-radio wireless networks considered in the existing literature. First, we validate the advantage of OR in MRMC-WMNs. Second, we propose Low-complexity Channel Assignment for Opportunistic Routing (LcCAOR), which assigns channels to flows according to the interference state of every node. Third, we implement the LcCOAR in a fully distributed manner. The simulation result shows that compared with OR in Single-Radio Single-Channel WMNs (SRSC-WMNs), the proposed OR can significantly enhance the throughput to 87.11% and 100.3% in grid and tree WMNs, respectively.

A New Congestion-Driven Placement Algorithm Based on Cell Inflation

A new congestion driven placement Algorithm is described based on the cell inflation. In this approach, the methods of probability estimation and star model are used to evaluate the routing of nets. Global placement can be done by using the algorithm of global optimization and slicing partitioning. The denotation of virtual area of cell is given to indicate not only the area of cell but also the routing demand.The virtual area of a cell is got by using the strategy of cell inflation, with which in the slicing partitioning, the routing congestion is eliminated. Further reduction in congestion is achieved by cell moving. The algorithm has been tested on a set of sample circuits from American companies, with great improvement in routablity having been obtained.

An Investigation on Thermization of Milk in Can Using Computational Fluid Dynamics

Thermal processing of milk is an important unit operation to inactivate the spoilage organism and enzymes and thus increase the storage life of milk, It was very difficult to find out the temperature distribution inside the cans during thermal processing. A Computational Fluid Dynamics （CFD） model was developed for thermization of milk in the can heating at 65℃ for the first time to determine the temperature distribution in the canned milk at stationary position. This developed CFD model was validated with the experimental measurements of temperature. The effects of thermization temperature on milk flow profile （velocity）, milk temperature and viscosity profiles inside the can during thermal process were investigated. Temperature profiles of milk in can at three different planes （i.e. top, middle and bottom plane） were studied. Moreover, thermization unit was calculated by correlating with temperature and it was found that maximum thermization unit was achieved at 540 s of thermal processing of milk in can.

On Simple MCD-Graphs

A simple graph G on n vettices is said to be a simple MCD-graph if G has no two cyties having the same length and has the maximum possible number of edges.Two results of the number of cy cles in G are given by introdueing the Concept of a path decomposition and by them,the following theorem is proved:If G is a simple MCD-graph,then G is not a 2-connected planar graph and for all n except seven integer,G is not a 2-connected graph on n vertices containing a subgraph homeomor phic to K_4.

Analysis on Temperature Distributions in Single Cell of Polymer Electrolyte Fuel Cell When Operated in High Temperature Range

This study is to understand the impact of operating condition, especially initial operation temperature （Tini） which is set in high temperature range, on the temperature profile of the interface between PEM （polymer electrolyte membrane） and catalyst layer at the cathode （i.e., the reaction surface） in a single PEFC （polymer electrolyte fuel cell）. A 1D multi-plate heat transfer model based on the temperature data of separator measured using thermograph in a power generation experiment was developed to evaluate the reaction surface temperature （Treact）. This study investigated the effects of flow rate, relative humidity and type of supply gas as well as Tini on the temperature distribution on reaction surface. The results obtained in 02 supply case show that, the temperature rise at the segments near the outlet of cell decreases with increasing Tini irrespective of relative humidity of supply gas （RH）, while it is not seen in air supply case. Regarding the segments except near the outlet in 02 supply case, Treact - Tini increases with increasing Tini for 40% RH. The temperature distribution on reaction surface in 02 supply case is wider with increasing Tini as well as decreasing RH, though that in air supply case is relatively even.

Empirical Bayes Absolute Error Loss Estimation for Parameter of One-Side Truncation Distribution Families

In this paper we propose an absolute error loss EB estimator for parameter of one-side truncation distribution families. Under some conditions we have proved that the convergence rates of its Bayes risk is o, where 0<λ,r≤1,Mn≤lnln n (for large n),Mn→∞ as n→∞.