公共交通线路布设方法研究

根据公交的实际运营情况对实际的城市道路网上路段的取舍确定可通行公交线路网 ,对起讫点选取影响因素进行分析 ,在网络中进行起讫点的选取。考虑线长、非直线系数的约束 ,计算任意两起讫点间形成合理公交线路的可能 ,形成线路可行端点对集。采用最短路布设法和最大效率布设法对可行端点对形成可行线路进行计算 ,最后形成可行线路集 。

河流水质监测断面优化布设方法研究

以四川釜溪河水系水质监测断面布设方法为例,探讨在河流水质监测中,采用“宏观控制重点布设”与“功能河段分区布设”相结合的方法,优化布设监测断面的合理性和实用性。并提出用F检验法,对拟布监测断面水质进行“均匀性”检验,以确定最佳采样位。

手持GPS在电、磁法勘探测网布设工作中的应用

根据工程实践,以eTrex Venture(奇遇)手持GPS为例,介绍了手持GPS在布设电、磁法勘探测网中的使用方法,对如何保证其成果质量提出了建设性意见。

Development of a distributed and integratable manufacturing execution system framework

Using remote method invocation (RMI) and a distributed object-oriented technique, this paper presents a systematic approach to developing a manufacturing execution system (MES) framework, which is open, modularized, distributed, configurable, interoperable and maintainable. Moreover, the design patterns for the framework .are developed and a variety of functional components are designed by inheriting appropriate patterns. And then an application is constructed by invoking corresponding methods of related components. An MES system implementing the framework and design patterns can be facilely integrated with other manufacturing applications, such as enterprise resource planning (ERP) and floor control system (FCS) .

电站大地网接地电阻检测技术研究

水电站大地网接地电阻的检测因受地中不平衡电流、工频电流和短路电流等因素干扰,易使检测结果发生偏差。为此,开展了一系列的检测实验,使用了多种不同检测仪器、不同方法进行对比检测实验,获取了大量研究数据,分析得出了重要结论:采取变频检测方式,数据波动范围较小,检测结果比较稳定、可靠,抗干扰能力强。

Review of optimized layout of electric vehicle charging infrastructures

Electric vehicle is a kind of new energy vehicle which uses batteries as energy supply unit.A huge gap in charging infrastructures will be created by the expansion of electric vehicles.The effectiveness and rationality of charging facilities will directly affect the convenience and economy of the users,as well as the safe operation of the power grid.Three types of charging facilities:charging pile,charging station and battery swap station are introduced in this paper.According to the different methods of charging infrastructure planning,the research status of the method of determining charging demand points is expounded.And the spatial distribution of charging demand points extracted by the current site selection method has a certain deviation.Then the models and algorithms of charging infrastructure optimized layout are reviewed.Currently,many researches focus on three categories optimization objectives:benefit of power company side,investment cost of charging facility and user side cost,and the genetic algorithm and particle swarm optimization are the main solving algorithms.Finally,the relative methods and development trend of the charging infrastructures optimized layout are summarized,and some suggestions on the optimized layout of electric vehicle charging infrastructures are given forward.

Optimal design for buckets layout based on muck removal analysis of TBM cutterhead

The layout of the buckets for tunnel boring machine(TBM)directly affects the muck removal efficiency of cutterhead during excavation.In order to improve the muck removal performance for TBM,the optimal design of bucket layout was investigated.The whole muck transfer process was simulated by discrete-element method(DEM),including the muck falling,colliding,pilling up,shoveling and transferring into the hopper.The muck model was established based on size distribution analysis of muck samples from the water-supply tunnel project in Jilin Province,China.Then,the influence of the bucket number and the interval angle between buckets on muck removal performance was investigated.The results indicated that,as the number of buckets increased from four to eight,the removed muck increased by 29%and the residual volume decreased by 40.5%,and the process became steadier.Different interval angles between buckets were corresponding to different removed muck irregularly,but the residual muck number increased generally with the angles.The optimal layout of buckets for the cutterhead in this tunnel project was obtained based on the simulation results,and the muck removal performance of the TBM was verified by the actual data in the engineering construction.

Refreshing File Aggregate of Distributed Data Warehouse in Sets of Electric Apparatus

Integrating heterogeneous data sources is a precondition to share data for enterprises. Highly-efficient data updating can both save system expenses, and offer real-time data. It is one of the hot issues to modify data rapidly in the pre-processing area of the data warehouse. An extract transform loading design is proposed based on a new data algorithm called Diff-Match,which is developed by utilizing mode matching and data-filtering technology. It can accelerate data renewal, filter the heterogeneous data, and seek out different sets of data. Its efficiency has been proved by its successful application in an enterprise of electric apparatus groups.

Physical design method of MPSoC

Floorplan, clock network and power plan are crucial steps in deep sub-micron system-on-chip design. A novel di- agonal floorplan is integrated to enhance the data sharing between different cores in system-on-chip. Custom clock network con- taining hand-adjusted buffers and variable routing rules is constructed to realize balanced synchronization. Effective power plan considering both IR drop and electromigration achieves high utilization and maintains power integrity in our MediaSoC. Using such methods, deep sub-micron design challenges are managed under a fast prototyping methodology, which greatly shortens the design cycle.

A distributed software architecture design framework based on attributed grammar

Software architectures shift the focus of developers from lines-of-code to coarser-grained architectural elements and their overall interconnection structure. There are, however, many features of the distributed software that make the developing methods of distributed software quite different from the traditional ways. Furthermore, the traditional centralized ways with fixed interfaces cannot adapt to the flexible requirements of distributed software. In this paper, the attributed grammar (AG) is extended to refine the characters of distributed software, and a distributed software architecture description language (DSADL) based on attributed grammar is introduced, and then a model of integrated environment for software architecture design is proposed. It can be demonstrated by the practice that DSADL can help the programmers to analyze and design distributed software effectively, so the efficiency of the development can be improved greatly.

A design method and numerical study for a new type parabolic trough solar collector with uniform solar flux distribution

The non-uniform concentrated solar flux distribution on the outer surface of the absorber tube can lead to large circumferential temperature difference and high local temperature of the absorber tube wall,which is one of the primary causes of parabolic trough solar receiver(PTR)failures.In this paper,a secondary reflector used as a homogenizing reflector(HR)in a conventional parabolic trough solar collector(PTSC)was recommended to homogenize the solar flux distribution and thus increase the reliability of the PTR.The design method of this new type PTSC with a HR was also proposed.Meanwhile,the concentrated solar flux distribution was calculated by adopting the Monte Carlo ray-trace(MCRT)method.Then,the coupled heat transfer process within the PTR was simulated by treating the solar flux calculated by the MCRT method as the heat flux boundary condition for the finite volume method model.The solar flux distribution on the outer surface of the absorber tube,the temperature field of the absorber tube wall,and the collector efficiency were analyzed in detail.It was revealed that the absorber tube could almost be heated uniformly in the PTSC with a HR.As a result,the circumferential temperature difference and the maximum temperature could be reduced significantly,while the efficiency tended to decrease slightly due to the inevitably increased optical loss.Under the conditions studied in this paper,although the collector efficiency decreased by about 4%,the circumferential temperature difference was reduced from about 25 to 3 K and the maximum temperature was reduced from667 to 661 K.

Optimization and integration of LED array for uniform illumination distribution

A design method for light-emitting diode （LED） array is proposed to achieve a good uniform illumination distribution on target plane. By using random walk algorithm, the basic LED array modules are optimized ftrstly. The optimized basic arrays can generate uniform illumination distribution on their target plane. The optimized basic LED array mod- ules can be integrated into a large LED array module with more than tens of LEDs. In the large array, we can select a sub-array with K LEDs （K〉7）, which can produce the good uniform illumination distribution. By this way, we design two LED arrays which consist of 21 and 25 LEDs, respectively. The 21-LED array and 25-LED array can generate uniform illumination distributions with the uniformities of 95% and 90%, respectively.

An extended discrete particle swarm optimization algorithm for the dynamic facility layout problem

We extended an improved version of the discrete particle swarm optimization (DPSO) algorithm proposed by Liao et al.(2007) to solve the dynamic facility layout problem (DFLP). A computational study was performed with the existing heuristic algorithms, including the dynamic programming (DP), genetic algorithm (GA), simulated annealing (SA), hybrid ant system (HAS), hybrid simulated annealing (SA-EG), hybrid genetic algorithms (NLGA and CONGA). The proposed DPSO algorithm, SA, HAS, GA, DP, SA-EG, NLGA, and CONGA obtained the best solutions for 33, 24, 20, 10, 12, 20, 5, and 2 of the 48 problems from (Balakrishnan and Cheng, 2000), respectively. These results show that the DPSO is very effective in dealing with the DFLP. The extended DPSO also has very good computational efficiency when the problem size increases.

Optimization of the cavity facet coating in high power GaN-based semiconductor laser diodes

A method to calculate the reflectivity of the coated cavity facet was proposed, and the distribution of the optical power near the two coated cavity facets was calculated for GaN-based laser diodes. A new design method for reducing the optical power at the two cavity facets without changing the output power of laser diodes was discussed, which is helpful to optimize the cavity facet coating and raise the threshold current at which catastrophic optical damage occurs.

Facility Layout Based on Sequence Analysis:Design of Flowshops

A computer-aided method to design a hybrid layout--tree-shape planar flowlines is presented. In newtype fiowshop layout, the common machines shared by several flowlines could be located together in functional sections. The approach combines traditional cell formation techniques with sequence alignment algorithms. Firstly, a sequence analysis based cell formation procedure is adopted; then the operation sequences for parts are aligned to maximize machines adjacency in hyperedge representations; finally a tree-shape planar flowline will be obtained for each part family. With the help of a sample of operation sequences obtained from industry, this algorithm is illustrated.