期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
采用带状材料的汽车发电机定子加工工艺 被引量:2
1
作者 朱卫国 《电机与控制应用》 北大核心 2007年第3期61-62,共2页
介绍了一种汽车发电机定子铁心加工的新方法。使用冲制成齿形的铁心带状材料,经卷绕装置卷曲成形,可以大大提高材料的利用率。为了提高绕线、嵌线功效,设计了定子绕组的绕线和推入式嵌线一体机,并介绍了其基本工作原理。该样机与传统的... 介绍了一种汽车发电机定子铁心加工的新方法。使用冲制成齿形的铁心带状材料,经卷绕装置卷曲成形,可以大大提高材料的利用率。为了提高绕线、嵌线功效,设计了定子绕组的绕线和推入式嵌线一体机,并介绍了其基本工作原理。该样机与传统的人工绕线和嵌线相比具有突出的优点。 展开更多
关键词 汽车发电机 定子加工 带状材料 绕线和推入式嵌线一体机
下载PDF
基于变频器的张力控制及应用 被引量:16
2
作者 唐国兰 陈凌珊 吴云忠 《包装与食品机械》 CAS 2003年第5期34-36,共3页
本文介绍了张力控制的特点、张力控制的几种方式,重点分析了利用变频器、采用调节辊的张力控制方式在带状包装材料供送中的应用。
关键词 变频器 张力控制 带状包装材料 同步控制 包装机械
下载PDF
电镀过程管理不到位导致的镀层弊病
3
作者 沈涪 《电镀与精饰》 CAS 北大核心 2012年第1期30-32,共3页
在电镀加工过程中抓好细节管理是保证产品镀层质量的关键因素。无论是电镀设备的检查调整,还是镀液的周期维护,以及带状材料镀件的收放料工作,一旦出现疏忽必将导致质量问题产生。通过发生在带状材料连续电镀生产过程的几个质量故障事例... 在电镀加工过程中抓好细节管理是保证产品镀层质量的关键因素。无论是电镀设备的检查调整,还是镀液的周期维护,以及带状材料镀件的收放料工作,一旦出现疏忽必将导致质量问题产生。通过发生在带状材料连续电镀生产过程的几个质量故障事例,说明了细节管理工作的重要性。 展开更多
关键词 带状材料电镀 细节管理 质量故障
下载PDF
Zonal disintegration phenomenon in enclosing rock mass surrounding deep tunnels——Elasto-plastic analysis of stress field of enclosing rock mass 被引量:10
4
作者 WU Hao FANG Qin ZHANG Ya-dong GONG Zi-ming 《Mining Science and Technology》 EI CAS 2009年第1期84-90,共7页
The zonal disintegration phenomenon (ZDP) is a typical phenomenon in deep block rock masses. In order to investigate the mechanism of ZDP, an improved non-linear Hock-Brown strength criterion and a bi-linear constit... The zonal disintegration phenomenon (ZDP) is a typical phenomenon in deep block rock masses. In order to investigate the mechanism of ZDP, an improved non-linear Hock-Brown strength criterion and a bi-linear constitutive model of rock mass were used to analyze the elasto-plastic stress field of the enclosing rock mass around a deep round tunnel. The radius of the plastic region and stress of the enclosing rock mass were obtained by introducing dimensionless parameters of radial distance. The results show that tunneling in deep rock mass causes a maximum stress zone to appear in the vicinity of the boundary of the elastic and the plastic zone in the surrounding rock mass. Under the compression of a large tangential force and a small radial force, the rock mass in the maximum stress zone was in an approximate uniaxial loading state, which could lead to a split failure in the rock mass. 展开更多
关键词 enclosing rock mass around deep tunnels zonal disintegration equivalent material Hoek-Brown strength criterion
下载PDF
Color and chemical characterization of partially black-streaked heartwood in teak (Tectona grandis) 被引量:1
5
作者 Ganis LUKMANDARU Tatsuya ASHITANI Koetsu TAKAHASHI 《Journal of Forestry Research》 SCIE CAS CSCD 2009年第4期377-380,I0008,共5页
The heartwood of teak in certain areas of Java Island displays irregular black streaks along the annual rings. We investigated the color and chemical characteristics in a radial direction of partially black-streaked h... The heartwood of teak in certain areas of Java Island displays irregular black streaks along the annual rings. We investigated the color and chemical characteristics in a radial direction of partially black-streaked heartwood samples. Color properties (pH value, inorganic element, extractive content and extractive characterization) were measured in the color co-ordinates CIELAB system. The results show that the black streak part was 12-15 brightness (L^*) value units less than the normal heartwood. Furthermore, the black streak part had more red (a^*) but less yellow (b^*), hue (h) and chroma (C^*) than the normal wood. The pH value, ash content and calcium contents of the black streak part were slightly higher than those obtained for the normal wood. The content of the low-polar extractive (n-hexane and ethyl acetate) of the black streak part was considerably higher than that for the normal wood. The blackening process was speculated to be a kind of defense mechanism indicated by remarkable amount ofbioactive compound called tectoquinone. 展开更多
关键词 Tectona grandis black streak EXTRACTIVES inorganic materials
下载PDF
Separation of hematite from banded hematite jasper(BHJ) by magnetic coating 被引量:3
6
作者 Subhashree Singh H.Sahoo +2 位作者 S.S.Rath B.B.Palei B.Das 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第2期437-444,共8页
The separation of iron oxide from banded hematite jasper(BHJ) assaying 47.8% Fe, 25.6% Si O2 and 2.30%Al2O3 using selective magnetic coating was studied. Characterization studies of the low grade ore indicate that bes... The separation of iron oxide from banded hematite jasper(BHJ) assaying 47.8% Fe, 25.6% Si O2 and 2.30%Al2O3 using selective magnetic coating was studied. Characterization studies of the low grade ore indicate that besides hematite and goethite,jasper, a microcrystalline form of quartzite, is the major impurity associated with this ore. Beneficiation by conventional magnetic separation technique could yield a magnetic concentrate containing 60.8% Fe with 51% Fe recovery. In order to enhance the recovery of the iron oxide minerals, fine magnetite, colloidal magnetite and oleate colloidal magnetite were used as the coating material. When subjected to magnetic separation, the coated ore produces an iron concentrate containing 60.2% Fe with an enhanced recovery of56%. The AFM studies indicate that the coagulation of hematite particles with the oleate colloidal magnetite facilitates the higher recovery of iron particles from the low grade BHJ iron ore under appropriate conditions. 展开更多
关键词 banded hematite jasper ore selective coating oleate colloidal magnetite magnetic separation atomic force microscopy
下载PDF
一种具有新颖结构和形态的炭须
7
作者 董建 沈万慈 +4 位作者 胡小芳 张保法 刘旋 康飞宇 陈南平 《中国科学(B辑)》 CAS CSCD 北大核心 2001年第2期167-173,共7页
在高温处理球磨过的石墨材料时, 发现了一种结构和形状新颖的炭须. 透射电子显微术(TEM)和高分辨透射电子显微术(HREM)证实其石墨片层几乎垂直于炭须的轴向. 场发射扫描电子显微镜(FESEM)发现其表面具有螺旋结构. 结构分析证明这种螺旋... 在高温处理球磨过的石墨材料时, 发现了一种结构和形状新颖的炭须. 透射电子显微术(TEM)和高分辨透射电子显微术(HREM)证实其石墨片层几乎垂直于炭须的轴向. 场发射扫描电子显微镜(FESEM)发现其表面具有螺旋结构. 结构分析证明这种螺旋状炭须生成机理同高温处理后的炭材料中含有的微量碳化锆有关. 展开更多
关键词 炭须 球磨 透射电子显微术 扫描电子显微术 碳化锆 气相沉积 石墨 螺旋结构 生成机理 带状材料
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部