1研制背景配电网带电作业担负着10 k V线路的带电断接引线、带电更换杆上设备、带电消缺等众多工作。目前配电网带电作业使用最多的作业方法就是利用绝缘斗臂车绝缘手套作业法。但一直缺少将带电作业过程中使用的绝缘毯、个人工具及小...1研制背景配电网带电作业担负着10 k V线路的带电断接引线、带电更换杆上设备、带电消缺等众多工作。目前配电网带电作业使用最多的作业方法就是利用绝缘斗臂车绝缘手套作业法。但一直缺少将带电作业过程中使用的绝缘毯、个人工具及小型材料进行综合放置的架子。绝缘斗臂车作业过程中工具及小型材料放置不合理容易造成工具、小型材料坠落等问题,已成为影响作业效率的重要因素。为了解决上述问题,我们根据多年的现场带电作业实际经验,研制了一种带电作业绝缘斗臂车工具放置架,将其应用于配电网带电作业,有效提高了工作效率。展开更多
Fault zone trapped waves （FZTWs） mainly travel along the fractured fault zone （FZ） which is of low velocity and high attenuation. FZTWs often carry significant information about a fault＇s internal structure, so i...Fault zone trapped waves （FZTWs） mainly travel along the fractured fault zone （FZ） which is of low velocity and high attenuation. FZTWs often carry significant information about a fault＇s internal structure, so it is important to understand their wave field characteristics for FZ structure inversion. Most previous simulations are based on vertical faults, while in this paper we implement the FZTW simulations on vertical or inclined faults and compare their wave fields in both time and frequency domains. The results show that the existence of fault zone and inclined angle of fault can significantly influence the features of waves near faults. In amplitude, a fault zone can generate a larger amplitude of waves. The velocity contrast between two wails of fault may lead to amplification of amplitudes in the low velocity fault wall. In frequency, a fault zone tends to influence the waves in the low frequency range. In a pattern of particle polarization of FZTWs, it tends to be single direction for vertical faults but fork to multiple directions for inclined faults, which might provide a new way to study the fault zone with FZTWs. These conclusions may be valuable for FZ structure inversion, and will enhance the knowledge on near-fault strong ground motions.展开更多
A conveyor belt driven by wound rotor motors produces dynamic tension, velocity and accelerationduring starting. The terrible situation (such as resonance) in dynamic analysis and design is that system naturalfrequenc...A conveyor belt driven by wound rotor motors produces dynamic tension, velocity and accelerationduring starting. The terrible situation (such as resonance) in dynamic analysis and design is that system naturalfrequencies are equal to those for switching off electric resistances. This paper analyzes and determines systemnatural frequencies based on a modeling method of receptances with the analysis of sub-systems model and of theprinciple of their addition and conveyor loop closure. It also puts forward to calculate the time interval for switching off electric resistances. The starting of one conveyor is simulated by lumped-mass-spring-model software tofurther illustrate the influence of time interval for switching off electric resistances on conveyor dynamic behavior. Two methods are also compared. The receptance model is proved to be an excellent alternative.展开更多
From China to Russia,Tan-Lu fault system stretches for thousands of kilometers,towards NE 30°.The authors have collected more than ten magnetotelluric profile that China and Russia have carried out,in the studied...From China to Russia,Tan-Lu fault system stretches for thousands of kilometers,towards NE 30°.The authors have collected more than ten magnetotelluric profile that China and Russia have carried out,in the studied area of the Tan-Lu fault's northern section,and have analyzed electrical characteristics of the relevant profiles.Deriving the following conclusions:(1)Jiamusi-Bureya plots,etc.,demonstrate the high resistance of Kernel;(2)Fold belt attributed to the land showed high and low resistance stitching,associated with not only terrane accretion,but also upper mantle upwelling;below the sedimentary basin,the resistivity of the upper mantle is lower and closer to the surface comparing with the adjacent area(100-150);(3)In the system of Tan-Lu fracture,Yishu and Dunmi fracture,etc.are expressed as vertical low-resistivity zone;(4)There may exist subducted old-fashioned piece under Jiamusi and Bureya plots.展开更多
The magnetotelluric sounding method was used to study the active fault in Shenzhen city.Four magnetotelluric profiles with a dense station interval were laid out across the Shenzhen fault zone.The remote reference tec...The magnetotelluric sounding method was used to study the active fault in Shenzhen city.Four magnetotelluric profiles with a dense station interval were laid out across the Shenzhen fault zone.The remote reference technique was used in both data observation and processing to eliminate the electromagnetic noise near the survey sites,and relatively smooth apparent resistivity curves were obtained.TM mode data and two-dimensional inversion method as NLCG were used to obtain the electrical structures underground.According to the surficial geology survey results on regional strata and distribution of magmatic bodies and faults,the electrical structures at depths less than 2000m of each profile were interpreted.Two regional faults,the Henggang-Luohu fault and the Liantang fault,and seven local faults consistent with the electrical boundaries were verified or discovered.The strata in the survey area were then related with the change of resistivity.Electrical horizontal slices of depths less than 5000m indicate that the Henggang-Luohu fault and the Liantang fault bifurcate at the shallow part but tend to merge in the deep part.展开更多
文摘1研制背景配电网带电作业担负着10 k V线路的带电断接引线、带电更换杆上设备、带电消缺等众多工作。目前配电网带电作业使用最多的作业方法就是利用绝缘斗臂车绝缘手套作业法。但一直缺少将带电作业过程中使用的绝缘毯、个人工具及小型材料进行综合放置的架子。绝缘斗臂车作业过程中工具及小型材料放置不合理容易造成工具、小型材料坠落等问题,已成为影响作业效率的重要因素。为了解决上述问题,我们根据多年的现场带电作业实际经验,研制了一种带电作业绝缘斗臂车工具放置架,将其应用于配电网带电作业,有效提高了工作效率。
基金sponsored by the Key Basic Scientific Research Program of Institute of Earth Science,CEA(0213241302)
文摘Fault zone trapped waves （FZTWs） mainly travel along the fractured fault zone （FZ） which is of low velocity and high attenuation. FZTWs often carry significant information about a fault＇s internal structure, so it is important to understand their wave field characteristics for FZ structure inversion. Most previous simulations are based on vertical faults, while in this paper we implement the FZTW simulations on vertical or inclined faults and compare their wave fields in both time and frequency domains. The results show that the existence of fault zone and inclined angle of fault can significantly influence the features of waves near faults. In amplitude, a fault zone can generate a larger amplitude of waves. The velocity contrast between two wails of fault may lead to amplification of amplitudes in the low velocity fault wall. In frequency, a fault zone tends to influence the waves in the low frequency range. In a pattern of particle polarization of FZTWs, it tends to be single direction for vertical faults but fork to multiple directions for inclined faults, which might provide a new way to study the fault zone with FZTWs. These conclusions may be valuable for FZ structure inversion, and will enhance the knowledge on near-fault strong ground motions.
文摘A conveyor belt driven by wound rotor motors produces dynamic tension, velocity and accelerationduring starting. The terrible situation (such as resonance) in dynamic analysis and design is that system naturalfrequencies are equal to those for switching off electric resistances. This paper analyzes and determines systemnatural frequencies based on a modeling method of receptances with the analysis of sub-systems model and of theprinciple of their addition and conveyor loop closure. It also puts forward to calculate the time interval for switching off electric resistances. The starting of one conveyor is simulated by lumped-mass-spring-model software tofurther illustrate the influence of time interval for switching off electric resistances on conveyor dynamic behavior. Two methods are also compared. The receptance model is proved to be an excellent alternative.
基金the Project 12-05-91158 of the National Natural Science Foundation of China(NSFC)the Russian Academy of Sciences"Deep structure,evolution of the sedimentogenesis and tectonics of Northeastern China and southeastern Far East Russia"
文摘From China to Russia,Tan-Lu fault system stretches for thousands of kilometers,towards NE 30°.The authors have collected more than ten magnetotelluric profile that China and Russia have carried out,in the studied area of the Tan-Lu fault's northern section,and have analyzed electrical characteristics of the relevant profiles.Deriving the following conclusions:(1)Jiamusi-Bureya plots,etc.,demonstrate the high resistance of Kernel;(2)Fold belt attributed to the land showed high and low resistance stitching,associated with not only terrane accretion,but also upper mantle upwelling;below the sedimentary basin,the resistivity of the upper mantle is lower and closer to the surface comparing with the adjacent area(100-150);(3)In the system of Tan-Lu fracture,Yishu and Dunmi fracture,etc.are expressed as vertical low-resistivity zone;(4)There may exist subducted old-fashioned piece under Jiamusi and Bureya plots.
基金sponsored by the "Program for Active Fault Detection and Earthquake Risk Assessment in Shenzhen City",China
文摘The magnetotelluric sounding method was used to study the active fault in Shenzhen city.Four magnetotelluric profiles with a dense station interval were laid out across the Shenzhen fault zone.The remote reference technique was used in both data observation and processing to eliminate the electromagnetic noise near the survey sites,and relatively smooth apparent resistivity curves were obtained.TM mode data and two-dimensional inversion method as NLCG were used to obtain the electrical structures underground.According to the surficial geology survey results on regional strata and distribution of magmatic bodies and faults,the electrical structures at depths less than 2000m of each profile were interpreted.Two regional faults,the Henggang-Luohu fault and the Liantang fault,and seven local faults consistent with the electrical boundaries were verified or discovered.The strata in the survey area were then related with the change of resistivity.Electrical horizontal slices of depths less than 5000m indicate that the Henggang-Luohu fault and the Liantang fault bifurcate at the shallow part but tend to merge in the deep part.
