黏土砂性能的研究

型砂的干压强度、湿压强度和抗剪强度是评价型砂性能好坏的重要指标。通过试验的方法研究了不同类型的膨润土、水分以及紧实率对型砂的湿压强度的影响。试验结果表明:当水分含量在4%—5%、钙基膨润土7%、钠基膨润土8%、锤击次数9次时,型砂的强度可达到最佳的效果。

Energy dissipation rate: An indicator of coal deformation and failure under static and dynamic compressive loads

Dynamic disasters in Chinese coal mines pose a significant threat to coal productivity. Thus, a thorough understanding of the deformation and failure processes of coal is necessary. In this study, the energy dissipation rate is proposed as a novel indicator of coal deformation and failure under static and dynamic compressive loads. The relationship between stress-strain, uniaxial compressive strength, displacement rate, loading rate, fractal dimension, and energy dissipation rate was investigated through experiments conducted using the MTS C60 tests(static loads) and split Hopkinson pressure bar system(dynamic loads). The results show that the energy dissipation rate peaks are associated with stress drop during coal deformation, and also positively related to the uniaxial compressive strength. A higher displacement rate of quasi-static loads leads to an initial increase and then a decrease in energy dissipation rate, whereas a higher loading rate of dynamic loads results in larger energy dissipation rate. Theoretical analysis indicates that a sudden increase in energy dissipation rate suggests partial fracture occurring within coal under both quasi-static and dynamic loads. Hence, the energy dissipation rate is an essential indicator of partial fracture and final failure within coal, as well as a prospective precursor for catastrophic failure in coal mine.

Microstructure,mechanical and wear properties of aluminum borate whisker reinforced aluminum matrix composites

The microstructural features and the consequent mechanical properties were characterized in aluminium borate whisker(ABOw)(5, 10 and 15 wt.%) reinforced commercially-pure aluminium composites fabricated by conventional powder metallurgy technique. The aluminium powder and the whisker were effectively blended by a semi-powder metallurgy method. The blended powder mixtures were cold compacted and sintered at 600 ℃. The sintered composites were characterized for microstructural features by optical microscopy(OM), scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS), transmission electron microscopy(TEM) and X-ray diffraction(XRD) analysis. Porosity in the composites with variation in ABOw contents was determined. The effect of variation in content of ABOw on mechanical properties, viz. hardness, bending strength and compressive strength of the composites was evaluated. The dry sliding wear behaviour was evaluated at varying sliding distance at constant loads. Maximum flexural strength of 172 MPa and compressive strength of 324 MPa with improved hardness around HV 40.2 are obtained in composite with 10 wt.% ABOw. Further increase in ABOw content deteriorates the properties. A substantial increase in wear resistance is also observed with 10 wt.% ABOw. The excellent combination of mechanical properties of Al-10 wt.%ABOw composites is attributed to good interfacial bonds, less porosity and uniformity in the microstructure.

A column study of the hydro-mechanical behavior of mature fine tailings under atmospheric drying

In this paper, the hydro-mechanical behavior and physical properties of mature fine tailings(MFT) under atmospheric drying are investigated through a column study. In the study, evaporation takes place in the development of suction in the upper parts of the column and increasing suction leads to higher strength in the tailings. After 5 days, the suction in the first lift is around 17 k Pa in the upper part of the column.When a second lift is added, the first lift initially loses strength but over a 30 days' period, the strength is recovered to its prior value and suction in the second lift reaches 500 k Pa. The vane shear strength values show a substantial increase in the strength of the MFT after 30 days under atmospheric drying and drainage. The 90% strength found in the column exceeds the threshold(5 k Pa). The hydraulic-mechanical properties of the deposited tailings are closely coupled due to several mechanisms, such as evaporation,drainage, self-consolidation, suction and crack development. The findings of this study will provide a better understanding of the placement behavior of multiple lifts of MFT and thus contribute to reclamation design standards and reduce the use of dedicated disposal areas.