The similarity transformation model between different coordinate systems is not accurate enough to describe the discrepancy of them.Therefore,the coordinate transformation from the coordinate frame with poor accuracy ...The similarity transformation model between different coordinate systems is not accurate enough to describe the discrepancy of them.Therefore,the coordinate transformation from the coordinate frame with poor accuracy to that with high accuracy cannot guarantee a high precision of transformation.In this paper,a combined method of similarity transformation and regressive approximating is presented.The local error accumulation and distortion are taken into consideration and the precision of coordinate system is improved by using the recommended method展开更多
The meaning to research the potential of VLBI for geodetic applications is summarized. And the observation models and their related parameters of geodetic interest are investigated. Then, the principle and method of u...The meaning to research the potential of VLBI for geodetic applications is summarized. And the observation models and their related parameters of geodetic interest are investigated. Then, the principle and method of using the random model in VLBI data processing are investigated. With the world wide VLBI data from 2000-2004, the conditions to compute the parameters of geodetic interest are introduced, and so are the computing methods and processes. And the computed resuits of the parameters of geodetic interest are analyzed.展开更多
One of the problems in using grating sensors is how to measure a small Bragg wavelength shift accurately. Nowadays demodulation techniques are mainly based on the edge filter, tunable filter, or interferometric scanni...One of the problems in using grating sensors is how to measure a small Bragg wavelength shift accurately. Nowadays demodulation techniques are mainly based on the edge filter, tunable filter, or interferometric scanning methods. Interferometric demodulation is widely accepted as the technology which can provide the high sensitivity. An interrogation system using the interferometric scanning method is presented, in which an unbalanced fiber M-Z interferometer is used as the wavelength scanner for temperature measurement. A novel fiber Bragg grating sensor system based on M-Z interferometric demodulation technique is presented in this paper. The temperature sensitivity measured in the experiment is almost consistent with that obtained from the theoretic calculation.展开更多
Synthetic aperture radar interferometry (InSAR) has been used as an innovative technique for digital elevation model (DEM) and topographic map generation. In this paper, external DEMs are used for InSAR DEM generation...Synthetic aperture radar interferometry (InSAR) has been used as an innovative technique for digital elevation model (DEM) and topographic map generation. In this paper, external DEMs are used for InSAR DEM generation to reduce the errors in data processing. The DEMs generated from repeat-pass InSAR are compared. For steep slopes and severe changes in topography, phase unwrapping quality can be improved by subtracting the phase calculated from an external DEM. It is affirmative that the absolute height accuracy of the InSAR DEM is improved by using external DEM. The data processing was undertaken without the use of ground control points and other manual operation.展开更多
A new kinetic spectrophotometric method is developed for the measurement of manganese(Ⅱ) in water. The method is based on the catalytic effect of manganese(Ⅱ) with the oxidation of weak acid brilliant blue dye(RAWL)...A new kinetic spectrophotometric method is developed for the measurement of manganese(Ⅱ) in water. The method is based on the catalytic effect of manganese(Ⅱ) with the oxidation of weak acid brilliant blue dye(RAWL) by KIO4 using the Nitrilo triacetic acid(NTA) as an activation reagent. The optimum conditions obtained are 40 mgL-1 RAWL,1×10-4molL-1 KIO4,2×10-4 molL-1 Nitrilo triacetic acid(NTA),pH = 5.8,the reaction time of 3.00 min and the temperature of 20.0 ℃. Under the optimum conditions,the proposed method allows the measurement of manganese(Ⅱ) in a range of 0-50.0 ng mL-1 and with a detection limit of down to 0.158 ng mL-1. The recovery efficiency in measuring the standard manganese(Ⅱ) solution is in a range of 98.5%-102%,and the RSD is in a range of 0.76%-1.25%. The new method has been successfully applied to the measurement of manganese(Ⅱ) in both fresh water and seawater samples with satisfying results. Moreover,few cations and anions interfere with the measurement of manganese(Ⅱ). Compared with other kinetic catalytic methods and instrumental methods,the proposed method shows fairly good selectivity and sensitivity,low cost,cheapness,low detection limit and rapidity. It can be applied on boats easily.展开更多
This paper discussed the main parameters contributing to the measurement uncertainty of interferometric distance meter （IDM）. A simple and robust set-up is used to measure distance of about 12 cm with an expanded un...This paper discussed the main parameters contributing to the measurement uncertainty of interferometric distance meter （IDM）. A simple and robust set-up is used to measure distance of about 12 cm with an expanded uncertainty （ k = 2） of ±16.4 μm. The measurement uncertainty is found to be limited by the wavelength measurement accuracy. This set-up can be used to measure distances up to 56 m. It also enables easy determination of the point of equal path difference between the measuring and the reference arms. LabVIEW program is used for counting of the fringes and applying fast Fourier transfor- mation （FFT） to perform frequency selective filtration to the noise. Although the reported uncertainty does not represent the state-of-art uncertainty reached for similar distance, the measurement provides traceable measurement to the unit of length, the meter.展开更多
Used Ar + laser as a light source,BSO(Bi 12 SiO 20 ) crystal as a hologram recording material,CCD camera as a detector,and a holographic setup controlled by a computer,we have realized real time holographic i...Used Ar + laser as a light source,BSO(Bi 12 SiO 20 ) crystal as a hologram recording material,CCD camera as a detector,and a holographic setup controlled by a computer,we have realized real time holographic interferometry in terms of 3-interfe-rogram method.The deformation of a plate is measured under a pressure.展开更多
The tomography technique is commonly used for the reconstruction of holographic interferometry. However, the current reconstruction method doesn’t consider the measurement errors which are non-avoidable in the measur...The tomography technique is commonly used for the reconstruction of holographic interferometry. However, the current reconstruction method doesn’t consider the measurement errors which are non-avoidable in the measurement and will degrade the reconstruction quality. The factors affecting the reconstruction quality are analyzed and the distribution law of the reconstruction error with experimental errors is discussed. Finally, a method to improve the reconstruction quality—the Kalman filter method is presented.展开更多
Geometrical features of micro-systems can be determined by either tactile or optical profiling techniques, which show different non-linear transfer characteristics. This has to be considered especially, if the instrum...Geometrical features of micro-systems can be determined by either tactile or optical profiling techniques, which show different non-linear transfer characteristics. This has to be considered especially, if the instruments operate close to their physical limitations. Depending on the specific measuring task either point-wise or areal optical measurement may be advantageous. Hence, examples for both approaches are discussed. Furthermore, systematic effects, which are related to the measuring principle have to be taken into account, e.g. if sharp edges or slopes are present on the measuring object. As it is shown, for white-light interferometry these difficulties can be solved by a two-wavelength technique.展开更多
Multiply scattered waves are sensitive to media changes owing to the effect of repeated sampling,superposition and amplification. Based on this characteristic,small-medium changes could be detected by using coda wave ...Multiply scattered waves are sensitive to media changes owing to the effect of repeated sampling,superposition and amplification. Based on this characteristic,small-medium changes could be detected by using coda wave interferometry. In recent years,coda wave interferometry has been widely used in estimating velocity variation with high precision in areas such as seismology and non-destructive testing. This paper systematically presents the principle and research status of coda wave interferometry,and especial focus is placed on the research of media velocity variations by using repeating earthquakes,artificial sources,and ambient noise. Applications of coda wave interferometry can contribute to the more subtle understanding of dynamic evolution process in the medium.展开更多
文摘The similarity transformation model between different coordinate systems is not accurate enough to describe the discrepancy of them.Therefore,the coordinate transformation from the coordinate frame with poor accuracy to that with high accuracy cannot guarantee a high precision of transformation.In this paper,a combined method of similarity transformation and regressive approximating is presented.The local error accumulation and distortion are taken into consideration and the precision of coordinate system is improved by using the recommended method
基金Funded by the National 973 Program of China (No.2006CB701301)the Project of University Education and Research of HubeiProvince (No.20053039).
文摘The meaning to research the potential of VLBI for geodetic applications is summarized. And the observation models and their related parameters of geodetic interest are investigated. Then, the principle and method of using the random model in VLBI data processing are investigated. With the world wide VLBI data from 2000-2004, the conditions to compute the parameters of geodetic interest are introduced, and so are the computing methods and processes. And the computed resuits of the parameters of geodetic interest are analyzed.
文摘One of the problems in using grating sensors is how to measure a small Bragg wavelength shift accurately. Nowadays demodulation techniques are mainly based on the edge filter, tunable filter, or interferometric scanning methods. Interferometric demodulation is widely accepted as the technology which can provide the high sensitivity. An interrogation system using the interferometric scanning method is presented, in which an unbalanced fiber M-Z interferometer is used as the wavelength scanner for temperature measurement. A novel fiber Bragg grating sensor system based on M-Z interferometric demodulation technique is presented in this paper. The temperature sensitivity measured in the experiment is almost consistent with that obtained from the theoretic calculation.
基金Funded by the Key Tenth five Project of State Bureau of Surveying and Mapping (No. 1469990324236 04 06) and the Faculty Research Grant of Uni versity of New South Wales (No. PS03283).
文摘Synthetic aperture radar interferometry (InSAR) has been used as an innovative technique for digital elevation model (DEM) and topographic map generation. In this paper, external DEMs are used for InSAR DEM generation to reduce the errors in data processing. The DEMs generated from repeat-pass InSAR are compared. For steep slopes and severe changes in topography, phase unwrapping quality can be improved by subtracting the phase calculated from an external DEM. It is affirmative that the absolute height accuracy of the InSAR DEM is improved by using external DEM. The data processing was undertaken without the use of ground control points and other manual operation.
文摘A new kinetic spectrophotometric method is developed for the measurement of manganese(Ⅱ) in water. The method is based on the catalytic effect of manganese(Ⅱ) with the oxidation of weak acid brilliant blue dye(RAWL) by KIO4 using the Nitrilo triacetic acid(NTA) as an activation reagent. The optimum conditions obtained are 40 mgL-1 RAWL,1×10-4molL-1 KIO4,2×10-4 molL-1 Nitrilo triacetic acid(NTA),pH = 5.8,the reaction time of 3.00 min and the temperature of 20.0 ℃. Under the optimum conditions,the proposed method allows the measurement of manganese(Ⅱ) in a range of 0-50.0 ng mL-1 and with a detection limit of down to 0.158 ng mL-1. The recovery efficiency in measuring the standard manganese(Ⅱ) solution is in a range of 98.5%-102%,and the RSD is in a range of 0.76%-1.25%. The new method has been successfully applied to the measurement of manganese(Ⅱ) in both fresh water and seawater samples with satisfying results. Moreover,few cations and anions interfere with the measurement of manganese(Ⅱ). Compared with other kinetic catalytic methods and instrumental methods,the proposed method shows fairly good selectivity and sensitivity,low cost,cheapness,low detection limit and rapidity. It can be applied on boats easily.
文摘This paper discussed the main parameters contributing to the measurement uncertainty of interferometric distance meter （IDM）. A simple and robust set-up is used to measure distance of about 12 cm with an expanded uncertainty （ k = 2） of ±16.4 μm. The measurement uncertainty is found to be limited by the wavelength measurement accuracy. This set-up can be used to measure distances up to 56 m. It also enables easy determination of the point of equal path difference between the measuring and the reference arms. LabVIEW program is used for counting of the fringes and applying fast Fourier transfor- mation （FFT） to perform frequency selective filtration to the noise. Although the reported uncertainty does not represent the state-of-art uncertainty reached for similar distance, the measurement provides traceable measurement to the unit of length, the meter.
文摘Used Ar + laser as a light source,BSO(Bi 12 SiO 20 ) crystal as a hologram recording material,CCD camera as a detector,and a holographic setup controlled by a computer,we have realized real time holographic interferometry in terms of 3-interfe-rogram method.The deformation of a plate is measured under a pressure.
基金KeyProgramofScienceandTechnologyofMinistryofEducation China
文摘The tomography technique is commonly used for the reconstruction of holographic interferometry. However, the current reconstruction method doesn’t consider the measurement errors which are non-avoidable in the measurement and will degrade the reconstruction quality. The factors affecting the reconstruction quality are analyzed and the distribution law of the reconstruction error with experimental errors is discussed. Finally, a method to improve the reconstruction quality—the Kalman filter method is presented.
文摘Geometrical features of micro-systems can be determined by either tactile or optical profiling techniques, which show different non-linear transfer characteristics. This has to be considered especially, if the instruments operate close to their physical limitations. Depending on the specific measuring task either point-wise or areal optical measurement may be advantageous. Hence, examples for both approaches are discussed. Furthermore, systematic effects, which are related to the measuring principle have to be taken into account, e.g. if sharp edges or slopes are present on the measuring object. As it is shown, for white-light interferometry these difficulties can be solved by a two-wavelength technique.
基金sponsored by the Task of Department of Earthquake Monitoring and Prediction,CEAthe Special Fund of Earthquake Scientific Research of China Earthquake Administration(201208003)
文摘Multiply scattered waves are sensitive to media changes owing to the effect of repeated sampling,superposition and amplification. Based on this characteristic,small-medium changes could be detected by using coda wave interferometry. In recent years,coda wave interferometry has been widely used in estimating velocity variation with high precision in areas such as seismology and non-destructive testing. This paper systematically presents the principle and research status of coda wave interferometry,and especial focus is placed on the research of media velocity variations by using repeating earthquakes,artificial sources,and ambient noise. Applications of coda wave interferometry can contribute to the more subtle understanding of dynamic evolution process in the medium.
