The requirements that a business needs to consider when building a wood panels manufacturing plant are much the same as they have been for decades, but today there is also the need for multiple environmental studies a...The requirements that a business needs to consider when building a wood panels manufacturing plant are much the same as they have been for decades, but today there is also the need for multiple environmental studies and permits. These are costly and time consuming additional expenses that often are the longest lead-time items on any project. Most industrialized countries have legislation in place to limit and control the negative impact that emission of pollutants may have on the environment. This paper discusses what is actually happening inside wood drying plants, and the prerequisite conditions for genesis of pyrolytic products relative to the operational parameters, such as choice of input raw materials, driers design and operational regime, choice of fuels for the heat generation and how these factors influence production of stack emission. The characterization of emission condensate by analytical methods is described, and survey of emission control system in use worldwide is described, and means of investigating what may be the optimum design for the control of emission is discussed. Alternate uses of utilizing the condensate, other than burning, are presented for consideration.展开更多
The total dust column and the dry deposition flux were calculated based on the optical properties that were measured by a shipboard sun photometer POM-01 MK II in a cloud-free and nonfrontal dust condition on 24 April...The total dust column and the dry deposition flux were calculated based on the optical properties that were measured by a shipboard sun photometer POM-01 MK II in a cloud-free and nonfrontal dust condition on 24 April 2006. The total dust column was calculated by using an integration method of the particle size distribution; the mean value was 1.42±0.30 g m 2. A linear correlation between the total dust column and the aerosol optical depth （AOD） with a linear factor of 2.7 g m 2 over the Sahara was applied to calculate the total dust column in this study; the results were lower than these calculated by the integration method. A reasonable factor of 3.2 g m^-2 was achieved by minimizing the standard deviation （SD） of the two methods. The two layers model, which includes the deposition processes of turbulent transfer, Brownian diffusion, impaction and gravitational settling over the sea＇s surface, was used to calculate the dry deposition flux; the mean value was 5.05±2.49 μg m^-2 s^-1. A correlation among the total dust column, dry deposition flux, AOD, and effective radius was discussed. The correlation between the total better than that between dust column and the AOD was the total dust column and the effective radius; however, the correlation between the dry deposition flux and the effective radius was better than that between the dry deposition flux and the AOD.展开更多
The Taklimakan Desert(TD) and Gobi Desert(GD) are two of the most important dust sources in East Asia, and have important impact on energy budgets, ecosystems and water cycles at regional and even global scales. To in...The Taklimakan Desert(TD) and Gobi Desert(GD) are two of the most important dust sources in East Asia, and have important impact on energy budgets, ecosystems and water cycles at regional and even global scales. To investigate the contribution of the TD and the GD to dust concentrations in East Asia as a whole, dust emissions, transport, and deposition over the TD and the GD in different seasons from 2007 to 2011 were systematically compared, based on the Weather Research and Forecasting model coupled with Chemistry(WRF-Chem). Dust emissions, uplift, and long-range transport related to these two dust source regions were markedly different due to differences in topography, elevation, thermal conditions, and atmospheric circulation. Specifically,the topography of the GD is relatively flat, and at a high elevation, and the area is under the influence of two jet streams at high altitudes, resulting in high wind speeds in the upper atmosphere. Deep convective mixing enables the descending branch of jet streams to continuously transport momentum downward to the mid-troposphere, leading to enhanced wind speeds in the lower troposphere over the GD which favors the vertical uplift of the GD dust particles. Therefore, the GD dust was very likely to be transported under the effect of strong westerly jets, and thus played the most important role in contributing to dust concentrations in East Asia. Approximately 35% and 31% of dust emitted from the GD transported to remote areas in East Asia in spring and summer, respectively. The TD has the highest dust emission capabilities in East Asia, with emissions of about 70.54 Tg yr.1 in spring, accounting for 42% of the total dust emissions in East Asia. However, the TD is located in the Tarim Basin and surrounded by mountains on three sides. Furthermore, the dominant surface wind direction is eastward and the average wind speed at high altitudes is relatively small over the TD. As a result, the TD dust particles are not easily transported outside the Tarim Basin, such that most of the dust particles are re-deposited after uplift, at a total deposition rate of about 40 g m.2. It is only when the TD dust particles are uplifted above 4 km, and entrained in westerlies that they begin to undergo a long-range transport. Therefore,the contribution of the TD dust to East Asian dust concentrations was relatively small. Only 25% and 23% of the TD dust was transported to remote areas over East Asia in spring and summer, respectively.展开更多
文摘The requirements that a business needs to consider when building a wood panels manufacturing plant are much the same as they have been for decades, but today there is also the need for multiple environmental studies and permits. These are costly and time consuming additional expenses that often are the longest lead-time items on any project. Most industrialized countries have legislation in place to limit and control the negative impact that emission of pollutants may have on the environment. This paper discusses what is actually happening inside wood drying plants, and the prerequisite conditions for genesis of pyrolytic products relative to the operational parameters, such as choice of input raw materials, driers design and operational regime, choice of fuels for the heat generation and how these factors influence production of stack emission. The characterization of emission condensate by analytical methods is described, and survey of emission control system in use worldwide is described, and means of investigating what may be the optimum design for the control of emission is discussed. Alternate uses of utilizing the condensate, other than burning, are presented for consideration.
基金funded by the National BasicResearch Program of China (Grant No. 2006CB403702)the Public Meteorology Special Foundation of Ministry of Science and Technology (Grant No. GYHY200706036)the National Natural Science Foundation of China (Grant No. 60638020)
文摘The total dust column and the dry deposition flux were calculated based on the optical properties that were measured by a shipboard sun photometer POM-01 MK II in a cloud-free and nonfrontal dust condition on 24 April 2006. The total dust column was calculated by using an integration method of the particle size distribution; the mean value was 1.42±0.30 g m 2. A linear correlation between the total dust column and the aerosol optical depth （AOD） with a linear factor of 2.7 g m 2 over the Sahara was applied to calculate the total dust column in this study; the results were lower than these calculated by the integration method. A reasonable factor of 3.2 g m^-2 was achieved by minimizing the standard deviation （SD） of the two methods. The two layers model, which includes the deposition processes of turbulent transfer, Brownian diffusion, impaction and gravitational settling over the sea＇s surface, was used to calculate the dry deposition flux; the mean value was 5.05±2.49 μg m^-2 s^-1. A correlation among the total dust column, dry deposition flux, AOD, and effective radius was discussed. The correlation between the total better than that between dust column and the AOD was the total dust column and the effective radius; however, the correlation between the dry deposition flux and the effective radius was better than that between the dry deposition flux and the AOD.
基金supported by the National Natural Science Foundation of China (Grant No. 41405003)Innovative Research Groups of the National Natural Science Foundation of China (Grant No. 41521004)+1 种基金the Programme of Introducing Talents of Discipline to Universities (Grant No. B 13045)the Foundation of Key Laboratory for Semi-Arid Climate Change of the Ministry of Education in Lanzhou University
文摘The Taklimakan Desert(TD) and Gobi Desert(GD) are two of the most important dust sources in East Asia, and have important impact on energy budgets, ecosystems and water cycles at regional and even global scales. To investigate the contribution of the TD and the GD to dust concentrations in East Asia as a whole, dust emissions, transport, and deposition over the TD and the GD in different seasons from 2007 to 2011 were systematically compared, based on the Weather Research and Forecasting model coupled with Chemistry(WRF-Chem). Dust emissions, uplift, and long-range transport related to these two dust source regions were markedly different due to differences in topography, elevation, thermal conditions, and atmospheric circulation. Specifically,the topography of the GD is relatively flat, and at a high elevation, and the area is under the influence of two jet streams at high altitudes, resulting in high wind speeds in the upper atmosphere. Deep convective mixing enables the descending branch of jet streams to continuously transport momentum downward to the mid-troposphere, leading to enhanced wind speeds in the lower troposphere over the GD which favors the vertical uplift of the GD dust particles. Therefore, the GD dust was very likely to be transported under the effect of strong westerly jets, and thus played the most important role in contributing to dust concentrations in East Asia. Approximately 35% and 31% of dust emitted from the GD transported to remote areas in East Asia in spring and summer, respectively. The TD has the highest dust emission capabilities in East Asia, with emissions of about 70.54 Tg yr.1 in spring, accounting for 42% of the total dust emissions in East Asia. However, the TD is located in the Tarim Basin and surrounded by mountains on three sides. Furthermore, the dominant surface wind direction is eastward and the average wind speed at high altitudes is relatively small over the TD. As a result, the TD dust particles are not easily transported outside the Tarim Basin, such that most of the dust particles are re-deposited after uplift, at a total deposition rate of about 40 g m.2. It is only when the TD dust particles are uplifted above 4 km, and entrained in westerlies that they begin to undergo a long-range transport. Therefore,the contribution of the TD dust to East Asian dust concentrations was relatively small. Only 25% and 23% of the TD dust was transported to remote areas over East Asia in spring and summer, respectively.
